Articles with "decarburization" as a keyword



Photo by elevatebeer from unsplash

Thermodynamic Discussion of CO2 Injection in Molten Steel

Sign Up to like & get
recommendations!
Published in 2019 at "steel research international"

DOI: 10.1002/srin.201900450

Abstract: CO2 utilization in the steel industry is indispensable to energy saving and emission reduction. Blowing CO2 into a basic oxygen furnace assists decarburization. Thermodynamics of the decarburization reaction while injecting CO2 into molten steel and… read more here.

Keywords: decarburization; pressure; co2; molten steel ... See more keywords
Photo by davidhellmann from unsplash

The effect of sol–gel boehmite coatings on the corrosion and decarburization of C45 steel

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Sol-Gel Science and Technology"

DOI: 10.1007/s10971-018-4664-4

Abstract: AbstractSol–gel boehmite coatings were produced on the polished surfaces of hypo-eutectoid C45carbon steel by dip coating. After the deposition the coatings were heat treated by drying at RT, 150 and 200 °C. It was found that… read more here.

Keywords: decarburization; steel; boehmite coatings; sol gel ... See more keywords
Photo from archive.org

Mathematical Modeling of Decarburization in Levitated Fe-Cr-C Droplets

Sign Up to like & get
recommendations!
Published in 2018 at "Metallurgical and Materials Transactions B"

DOI: 10.1007/s11663-018-1248-1

Abstract: Using carbon dioxide to replace oxygen as an alternative oxidant gas has proven to be a viable solution in the decarburization process, with potential for industrial applications. In a recent study, the transport phenomena governing… read more here.

Keywords: decarburization; mathematical modeling; gas; decarburization levitated ... See more keywords
Photo by aaronburden from unsplash

FIB-SEM Sectioning Study of Decarburization Products in the Microstructure of HVOF-Sprayed WC-Co Coatings

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Thermal Spray Technology"

DOI: 10.1007/s11666-018-0721-3

Abstract: The thermal dissolution and decarburization of WC-based powders that occur in various spray processes are a widely studied phenomenon, and mechanisms that describe its development have been proposed. However, the exact formation mechanism of decarburization… read more here.

Keywords: study decarburization; decarburization; fib sem; sem sectioning ... See more keywords
Photo by julienlphoto from unsplash

Ar-CO-liquid steel flow with decarburization chemical reaction in single snorkel refining furnace

Sign Up to like & get
recommendations!
Published in 2020 at "International Journal of Heat and Mass Transfer"

DOI: 10.1016/j.ijheatmasstransfer.2019.118857

Abstract: Abstract As a new style refining equipment developed from the traditional RH furnace, Single Snorkel Refining Furnace (SSRF), which is also called as single snorkel RH, is widely used for producing ultra-low carbon steel. However,… read more here.

Keywords: decarburization; flow decarburization; single snorkel; steel ... See more keywords
Photo by etienne_beauregard from unsplash

Microstructure-property relations in WC-Co coatings sprayed from combinatorial Ni-plated and nanostructured powders

Sign Up to like & get
recommendations!
Published in 2017 at "Materials Characterization"

DOI: 10.1016/j.matchar.2017.05.005

Abstract: Abstract In this study, we addressed the effects of Ni-plating and nanostructuring of WC-Co powders on the microstructure-property relations and WC decarburization of WC-Co composite coatings. By high velocity oxygen fuel (HVOF) spraying, the coating… read more here.

Keywords: decarburization; property relations; plated nanostructured; nanostructured powders ... See more keywords
Photo from wikipedia

Circulation flow rate and decarburization in the RH degasser under low atmospheric pressure

Sign Up to like & get
recommendations!
Published in 2018 at "Vacuum"

DOI: 10.1016/j.vacuum.2018.04.007

Abstract: Abstract The pressure difference between the atmosphere and vacuum vessel is the driving force to make the molten steel to be suctioned into the RH vacuum vessel where decarburization occurs. The circulation flow rate of… read more here.

Keywords: decarburization; circulation flow; flow rate; flow ... See more keywords
Photo from wikipedia

Effect of oxidizing slag on the decarburization of ultra-low-carbon steel during the ruhrstahl-heraeus vacuum process

Sign Up to like & get
recommendations!
Published in 2021 at "Vacuum"

DOI: 10.1016/j.vacuum.2020.109984

Abstract: Abstract In this study, the effect of oxidizing slag on the decarburization of ultra-low carbon steel during the RH vacuum process was investigated. Based on the experimental results under different operating conditions, it was concluded… read more here.

Keywords: vacuum process; decarburization; steel; oxidizing slag ... See more keywords
Photo from wikipedia

Decarburization of Pig Iron in Synthetic BOF Converter Slag

Sign Up to like & get
recommendations!
Published in 2019 at "ISIJ International"

DOI: 10.2355/isijinternational.isijint-2018-472

Abstract: The fundamentals of the BOF converter process have been studied for a long time, and the decarburization has been the topic for many researchers.1–20) The main purpose of the BOF furnace is to decarburize and… read more here.

Keywords: slag; decarburization; converter; metal ... See more keywords
Photo from wikipedia

Decarburization in Laser Surface Hardening of AISI 420 Martensitic Stainless Steel

Sign Up to like & get
recommendations!
Published in 2023 at "Materials"

DOI: 10.3390/ma16030939

Abstract: Decarburization deteriorates the surface mechanical properties of steel. It refers to the loss of carbon from steel’s surface when exposed to an open-air environment in elevated-temperature conditions. Despite the short interaction time and fast thermal… read more here.

Keywords: steel; laser surface; surface; surface hardening ... See more keywords
Photo from wikipedia

Decarburization of Wire-Arc Additively Manufactured ER70S-6 Steel

Sign Up to like & get
recommendations!
Published in 2023 at "Materials"

DOI: 10.3390/ma16103635

Abstract: Decarburization is an unwanted carbon-loss phenomenon on the surfaces of a material when they are exposed to oxidizing environments at elevated temperatures. Decarburization of steels after heat treatment has been widely studied and reported. However,… read more here.

Keywords: additively manufactured; steel; wire arc; heat treatment ... See more keywords