Investigation on Low-Temperature Deformation Behaviour of Molybdenum Under Compressive Loading
Sign Up to like & getrecommendations! Published in 2019 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-019-01575-6
Abstract: In this work, the plastic deformation behaviour of polycrystalline molybdenum (Mo) in the temperature range 298–1073 K has been analysed using compression tests. The investigation comprises of the deformation behaviour as well as microstructural evolution. The… read more here.
Keywords: temperature; deformation behaviour; investigation; deformation ... See more keywords
Determination of Constitutive Relationships of Tubular Materials at Various Strain Rates Using Hydro-Bulging Experiments
Sign Up to like & getrecommendations! Published in 2019 at "Experimental Techniques"
DOI: 10.1007/s40799-019-00342-y
Abstract: Liquid impact forming (LIF) is a rapid tube hydroforming technique. The deformation behaviour of a metal tube may be different in LIF from that in tube hydroforming. A constitutive equation or equivalently an equivalent stress-strain… read more here.
Keywords: bulging experiments; hydro bulging; tubular materials; deformation behaviour ... See more keywords
Design and deformation behaviour of a laminar B4C/Al composite
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.07.185
Abstract: Abstract A novel laminar B4C/Al composite was fabricated by vacuum hot-press sintering at a temperature of 680 °C, dwell time of 120 min, and pressure of 30 MPa. The measured Vickers hardness reached maximum and minimum values of… read more here.
Keywords: laminar b4c; b4c; deformation behaviour; design deformation ... See more keywords
A numerical solution to accurately predict deformation behaviour of metallic foam material up-to densification region for the possible use in composite structures
Sign Up to like & getrecommendations! Published in 2020 at "Composite Structures"
DOI: 10.1016/j.compstruct.2020.112419
Abstract: Abstract Closed cell metallic foam material has immense potential to use it as core material in composite structures. In the design of such structures and to understand numerically its deformation behaviour there is a difficulty… read more here.
Keywords: use; foam; foam material; deformation behaviour ... See more keywords
Effect of strain ratio on cyclic deformation behaviour of 7050-T6 aluminium alloy
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2019.105234
Abstract: Abstract This paper aims at investigating the strain ratio effect on cyclic deformation behaviour of 7050-T6 aluminium alloy. Low-cycle fatigue tests are conducted under strain-controlled conditions at three strain ratios (−1, 0, and 0.5) with… read more here.
Keywords: microscopy; deformation behaviour; strain; cyclic deformation ... See more keywords
The effect of helium implantation on the deformation behaviour of tungsten: X-ray micro-diffraction and nanoindentation
Sign Up to like & getrecommendations! Published in 2018 at "Scripta Materialia"
DOI: 10.1016/j.scriptamat.2017.12.014
Abstract: Abstract The effect of helium-implantation-induced defects on deformation behaviour is examined by comparing spherical nano-indents in unimplanted and helium-implanted regions of a tungsten single crystal. Helium-implantation increases hardness and causes large pileups. 3D-resolved X-ray micro-diffraction… read more here.
Keywords: effect helium; deformation behaviour; helium implantation; ray micro ... See more keywords
Development of constitutive relationship for thermomechanical processing of BN-reinforced magnesium composites to predict hot deformation behaviour
Sign Up to like & getrecommendations! Published in 2025 at "Materials Technology"
DOI: 10.1080/10667857.2025.2471585
Abstract: ABSTRACT The study focuses on characterizing the hot deformation behaviour of BN-reinforced magnesium alloy at temperatures between 300 and 400°C and strain rates of 0.01 to 10 s−1 through uniaxial compression tests. The research developed… read more here.
Keywords: deformation; hot deformation; deformation behaviour; reinforced magnesium ... See more keywords
Deformation behaviour of aged coronal dentin
Sign Up to like & getrecommendations! Published in 2018 at "Gerodontology"
DOI: 10.1111/ger.12321
Abstract: OBJECTIVE This study aimed to identify the changes in the time-dependent deformation response of coronal dentin with ageing and its relationship with changes in chemical composition. BACKGROUND The structural behaviour of dentin with ageing is… read more here.
Keywords: dentin; deformation behaviour; deformation; behaviour aged ... See more keywords
High-speed deformation behaviour of 45° extruded magnesium alloy under quasi-in-situ conditions
Sign Up to like & getrecommendations! Published in 2024 at "Materials Science and Technology"
DOI: 10.1177/02670836241237645
Abstract: In this study, quasi-in-situ electron backscatter diffraction was employed to investigate the microstructural evolution and deformation behaviour of ZK60 magnesium alloy with an initial 45° extruded state orientation under two high-speed impacts. The experimental results… read more here.
Keywords: quasi situ; deformation; high speed; deformation behaviour ... See more keywords
Deformation behaviour of low carbon high Mn twinning-induced plasticity steel
Sign Up to like & getrecommendations! Published in 2019 at "Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science"
DOI: 10.1177/0954406217730440
Abstract: The present study deals with the deformation behaviour of low carbon and high manganese twinning-induced plasticity (TWIP) steel (Fe–21Mn–3Si–3Al–0.06C, wt%) through microstructural investigation. Low carbon with high manganese along with the addition of aluminium in… read more here.
Keywords: carbon high; deformation behaviour; low carbon; deformation ... See more keywords
A newly developed strength-graded material and its deformation behaviour
Sign Up to like & getrecommendations! Published in 2018 at "Advances in Cement Research"
DOI: 10.1680/jadcr.17.00001
Abstract: The design and preparation of a cement-based composite material (CCM) with a strength gradient is described. The strength gradient was achieved by altering the water/cement ratio and the curing time along the section height of… read more here.
Keywords: strength; graded material; deformation behaviour; ccm ... See more keywords