LAUSR

About LAUSR
Donate
Contact Us

Follow us:

You are not signed in:

Sign Up!


   Articles with "denture base" as a keyword



Biomechanical aspects of reinforced implant overdentures: A systematic review.

Sign Up to like & get
recommendations! Published in 2019 at "Journal of the mechanical behavior of biomedical materials"

DOI: 10.1016/j.jmbbm.2018.12.006

Abstract: PURPOSE The purpose of this systematic review was to investigate the effect of reinforcement on the mechanical behaviour of implant overdenture (IOD) bases and its cumulative biological effect on the underlying supporting structures (implants and… read more here.

Keywords: denture base; systematic review; reinforcement; residual ridge ... See more keywords

Bond strength of a chairside autopolymerizing reline resin to injection-molded thermoplastic denture base resins.

Sign Up to like & get
recommendations! Published in 2017 at "Journal of prosthodontic research"

DOI: 10.1016/j.jpor.2016.04.006

Abstract: PURPOSE This study evaluated the shear bond strength of a chairside autopolymerizing reline resin to injection-molded thermoplastic denture base resins. METHODS Four kinds of injection-molded thermoplastic resins (two polyamides, a polyethylene terephthalate copolymer and a… read more here.

Keywords: resin; injection molded; bond; molded thermoplastic ... See more keywords

Comparison of adhesiveness of chewing gum to hard and soft denture base materials.

Sign Up to like & get
recommendations! Published in 2019 at "Journal of prosthodontic research"

DOI: 10.1016/j.jpor.2019.10.008

Abstract: PURPOSE The purpose of this study was to compare the adhesiveness of chewing gum to hard and soft denture base materials to investigate food retention associated with the basal surface of the denture. METHODS Test… read more here.

Keywords: dry conditions; chewing gum; denture; base materials ... See more keywords

Color stability, surface, and physicochemical properties of three-dimensional printed denture base resin reinforced with different nanofillers

Sign Up to like & get
recommendations! Published in 2024 at "Scientific Reports"

DOI: 10.1038/s41598-024-51486-w

Abstract: Various materials have been introduced for the three-dimensional (3D) printing of dentures. In this study, the color stability and surface and physicochemical properties of 3D-printed denture base resins with four types of nanofiller particles were… read more here.

Keywords: stability; denture base; color stability; group ... See more keywords

Biofilm removal effect of diatom complex on 3D printed denture base resin

Sign Up to like & get
recommendations! Published in 2024 at "Scientific Reports"

DOI: 10.1038/s41598-024-54408-y

Abstract: For patients who have difficulty in mechanical cleaning of dental appliances, a denture cleaner that can remove biofilm with dense extracellular polymeric substances is needed. The purpose of this study is to evaluate the efficacy… read more here.

Keywords: denture base; biofilm removal; base resin; diatom complex ... See more keywords

Comparison of 3D printed and conventional denture base materials in terms of durability and performance characteristics

Sign Up to like & get
recommendations! Published in 2025 at "Scientific Reports"

DOI: 10.1038/s41598-025-01685-w

Abstract: The aim of this study was to compare the performance of denture base materials produced by three-dimensional (3D) printing and conventional methods in terms of their mechanical durability and water absorption and solubility properties. Conventional… read more here.

Keywords: denture base; denture; durability; performance ... See more keywords

Mechanical and esthetic properties of denture base resins in relation to thermocycling

Sign Up to like & get
recommendations! Published in 2025 at "Scientific Reports"

DOI: 10.1038/s41598-025-24596-2

Abstract: This study evaluated the shear bond strength (SBS), flexural strength, and color stability of three denture base resins (DBRs)—heat-polymerized (HEA), cold-polymerized (COL), and 3D-printed (TDP)—before and after thermocycling. SBS was evaluated after bonding COL to… read more here.

Keywords: denture base; flexural strength; hea; col ... See more keywords

Effects of Denture Base Thicknesses and Reinforcement on Fracture Strength in Mandibular Implant Overdenture with Bar Attachment: Under Various Acrylic Resin Types

Sign Up to like & get
recommendations! Published in 2019 at "European Journal of Dentistry"

DOI: 10.1055/s-0039-1688533

Abstract: Objective This study aimed to assess the effect of reinforcement, denture base thickness, and acrylic resin types on dynamic and static fracture strength in mandibular implant overdentures with bar attachment. Materials and Methods One hundred… read more here.

Keywords: resin; denture base; fracture strength; fracture ... See more keywords

The Effect of Salivary pH on the Flexural Strength and Surface Properties of CAD/CAM Denture Base Materials

Sign Up to like & get
recommendations! Published in 2022 at "European Journal of Dentistry"

DOI: 10.1055/s-0042-1749160

Abstract: Abstract Objectives  This study aimed to evaluate the influence of different salivary pH on flexural strength, hardness, and surface roughness of computer-aided design and computer-aided manufacturing (CAD/CAM) milled and three-dimensional (3D)-printed denture base resins. Methods… read more here.

Keywords: strength; denture base; surface; flexural strength ... See more keywords

Can pulsed laser treatment reduce microbial adhesion on the surface of resin denture base materials?

Sign Up to like & get
recommendations! Published in 2024 at "Materials Research Express"

DOI: 10.1088/2053-1591/ad64b0

Abstract: Objectives. The present work investigates the influence of pulsed nanosecond laser patterning of two commercial heat cure poly (methyl methacrylate) denture base materials, Trevalon and DPI heat cure, on their surface characteristics such as roughness,… read more here.

Keywords: denture base; microbial adhesion; base materials; surface ... See more keywords

Effect of Reinforcement on the Flexural Properties of Injection‐Molded Thermoplastic Denture Base Resins

Sign Up to like & get
recommendations! Published in 2017 at "Journal of Prosthodontics"

DOI: 10.1111/jopr.12419

Abstract: PURPOSE To evaluate the effect of reinforcement on the flexural properties of injection-molded thermoplastic denture base resins. MATERIALS AND METHODS Three injection-molded thermoplastic denture base resins (polyamide, polyester, polycarbonate) were selected for this study, and… read more here.

Keywords: thermoplastic denture; injection molded; molded thermoplastic; denture ... See more keywords