Sign Up to like & get
recommendations!
0
Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3730-y
Abstract: Hard and optically transparent nanocomposite Al-Si-N thin films were deposited using DC magnetron sputtering at different process parameters. There was a significant effect of these parameters on the film properties affecting its mechanical and optical…
read more here.
Keywords:
nitrogen;
nitrogen content;
substrate temperature;
deposition pressure ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2018 at "Current Applied Physics"
DOI: 10.1016/j.cap.2018.02.014
Abstract: Abstract Mo films deposited by DC sputtering are widely used as back contact in CIGS and CZTS based thin film solar cells. However, there have been only a few studies on the deposition of Mo…
read more here.
Keywords:
pressure power;
deposition pressure;
power;
sputtered films ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2017 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.7b03181
Abstract: We report the study of anatase TiO2(001)-oriented thin films grown by pulsed laser deposition on LaAlO3(001). A combination of in situ and ex situ methods has been used to address both the origin of the…
read more here.
Keywords:
oxygen;
thin films;
tio2 001;
deposition pressure ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2024 at "Materials Research Express"
DOI: 10.1088/2053-1591/ad6666
Abstract: This study investigated the impact of deposition pressure on the microstructure and tribological properties of B/WS2 composite coatings deposited via unbalanced magnetron sputtering. Deposition pressures of 0.6 Pa, 0.8 Pa, 1.0 Pa, 1.2 Pa, and…
read more here.
Keywords:
composite coatings;
deposition pressure;
ws2 composite;
deposition ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2024 at "Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering"
DOI: 10.1177/09544089241272870
Abstract: In the present study, δ-TaN thin films were deposited by reactive magnetron sputtering (physical vapour deposition) on Ti6Al7Nb alloy by varying the deposition pressure (0.8–0.2 Pa). Their crystalline structure, chemical composition, surface roughness, and surface morphology…
read more here.
Keywords:
ti6al7nb alloy;
deposition pressure;
magnetron sputtering;
tan coatings ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2018 at "Energies"
DOI: 10.3390/en11092483
Abstract: CO2 and N2 injection is an effective enhanced oil recovery technology in the oilfield especially for low-permeability and extra low-permeability reservoirs. However, these processes can induce an asphaltene deposition during oil production. Asphaltene-deposition-induced formation damage…
read more here.
Keywords:
deposition pressure;
deposition;
co2;
injection ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2023 at "Materials"
DOI: 10.3390/ma16031141
Abstract: This study investigates the effect of deposition pressure on the microstructure and tribological properties of CrAgCeN coatings synthesized via unbalanced magnetron sputtering. The CrAgCeN coatings presented a face-centered cubic structure. As the deposition pressure increased,…
read more here.
Keywords:
cragcen coatings;
deposition pressure;
properties cragcen;
deposition ... See more keywords