Investigation of deposition temperature effect on spatial patterns of MgF2 thin films
Sign Up to like & getrecommendations! Published in 2022 at "Microscopy Research and Technique"
DOI: 10.1002/jemt.24246
Abstract: In this work, the atomic force microscopy (AFM) technique was used to characterize 3D MgF2 thin film surfaces through advanced analysis involving morphological, fractal, multifractal, succolarity, lacunarity and surface entropy (SE) parameters, consistent with ISO… read more here.
Keywords: deposition temperature; mgf2 thin; microscopy; investigation deposition ... See more keywords
Influence of deposition temperature on WTiN coatings tribological performance
Sign Up to like & getrecommendations! Published in 2018 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2017.07.215
Abstract: Abstract WTiN films were grown on silicon and stainless-steel substrates using the DC magnetron sputtering technique. The substrate temperature was varied taking values of 100 °C, 200 °C, 300 °C, and 400 °C. X-ray diffraction analysis allowed us to… read more here.
Keywords: temperature; microscopy; deposition temperature; influence deposition ... See more keywords
Influence of deposition temperature on the structure, optical and electrical properties of a-C films by DCMS
Sign Up to like & getrecommendations! Published in 2020 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.144310
Abstract: Abstract Amorphous carbon films have been considered as strongly promising semiconductor materials, due to their superior mechanical properties, specific bond structures, as well as facile deposition over large area with device integrated processes. To figure… read more here.
Keywords: temperature; deposition temperature; deposition; optical electrical ... See more keywords
Effect of CdS deposition temperature for thermally grown Cu(In,Ga)Se2 and two-step chalcogenized Cu(In,Ga)(S,Se)2 absorbers on solar cell performances
Sign Up to like & getrecommendations! Published in 2017 at "Current Applied Physics"
DOI: 10.1016/j.cap.2016.11.007
Abstract: Abstract CdS buffer layer of varying thickness ranging from 23 to 58 nm deposited at different substrate temperature were prepared as n-type junction partner for thermally grown Cu(In,Ga)Se 2 and two-step chalcogenized Cu(In,Ga)(S,Se) 2 photovoltaic absorber… read more here.
Keywords: thermally grown; solar cell; deposition temperature; temperature ... See more keywords
Effect of deposition temperature on the mechanical, corrosive and tribological properties of mullite coatings
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.01.087
Abstract: Abstract Thermal-sprayed ceramic coatings are used worldwide to provide protection from corrosion and wear on components. Nevertheless, they exhibit very poor tribological performance in corrosive conditions, primarily because the high porosity and low cohesive strength,… read more here.
Keywords: deposition temperature; corrosion wear; deposition; effect deposition ... See more keywords
Effects of deposition temperature on structure, residual stress and corrosion behavior of Cr/TiN/Ti/TiN films
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.09.032
Abstract: Abstract Composite TiN film was prepared on AZ31 at four sets of different deposition temperatures. X-ray diffraction and X-ray fluorescent were employed to determine the structure, residual stress, thickness and chemical elements. A scratch tester… read more here.
Keywords: deposition temperature; tin; residual stress; corrosion ... See more keywords
Effect of deposition temperature on the corrosion behavior of CVD SiC coatings on SiCf/SiC composites under simulated PWR conditions
Sign Up to like & getrecommendations! Published in 2021 at "Corrosion Science"
DOI: 10.1016/j.corsci.2020.109233
Abstract: Abstract To improve the hydrothermal corrosion resistance of SiCf/SiC composites, SiC coatings were chemical vapor deposited at 1000, 1150 and 1200 °C. Their corrosion behaviors were investigated using immersion tests and various analytical methods. The… read more here.
Keywords: sic coatings; deposition temperature; sicf sic; corrosion ... See more keywords
Influence of deposition temperature on the microstructure of thin-film electrolyte for SOFCs with a nanoporous AAO support structure
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2017.03.148
Abstract: Abstract In this paper we investigate the influence of deposition temperature on the microstructure of yttria stabilized zirconia thin-films based on an anodized aluminum oxide (AAO) support structure. The yttria-stabilized zirconia (YSZ) electrolytes were deposited… read more here.
Keywords: temperature; deposition temperature; deposition; electrolyte ... See more keywords
Effect of deposition temperature on microstructure, corrosion behavior and adhesion strength of Zn-Mg coatings on mild steel
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.12.289
Abstract: Abstract Zn-Mg alloys are strong candidates for the protective coating materials on steel products due to their excellent corrosion resistance compared to pure Zn. In previous research, sputtered Zn-Mg coatings with a high Mg content… read more here.
Keywords: adhesion strength; deposition temperature; corrosion; temperature ... See more keywords
Effect of deposition temperature on hydrophobic CrN/AlTiN nanolaminate composites deposited by Multi-Arc-Ion Plating
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.05.069
Abstract: Abstract A serious of CrN/AlTiN nanolaminate films with different deposition temperatures were synthesized by Multi-Arc-Ion Plating (MAIP). The composition and microstructural evolution, hydrophobicity, and mechanical properties of CrN/AlTiN nanolaminate films were studied. It was found… read more here.
Keywords: crn altin; altin nanolaminate; deposition temperature;
Electroless controllable growth of ZnO films and their morphology-dependent antimicrobial properties.
Sign Up to like & getrecommendations! Published in 2018 at "Journal of hazardous materials"
DOI: 10.1016/j.jhazmat.2017.12.039
Abstract: An electroless deposition process was used to synthesize with a controlled morphology, polycrystalline ZnO on glass substrates as antimicrobial coatings. The influence of deposition temperature (Tdep) on the physicochemical and antimicrobial properties of the ZnO… read more here.
Keywords: zno films; morphology; deposition temperature; antimicrobial properties ... See more keywords