Workability Characteristics and Deformation Mechanisms of Die-Cast AM60 and AZ91 Magnesium Alloys: Correlation with Processing Maps
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3745-4
Abstract: Thermo-mechanical deformation behavior of the die-cast AM60 and AZ91 alloys was assessed by performing uniaxial compression tests on Gleeble 3800 simulator under different temperatures and strain rate conditions. Low-temperature deformation behavior of both alloys was… read more here.
Keywords: processing; die cast; deformation; am60 az91 ... See more keywords
Incorporating an ICME Approach into Die-Cast Magnesium Alloy Component Design
Sign Up to like & getrecommendations! Published in 2018 at "JOM"
DOI: 10.1007/s11837-018-2985-y
Abstract: Abstract The work presented here summarizes a methodology to incorporate an integrated computational materials engineering approach into die-cast magnesium alloy component design. The framework of this approach was developed through process-structure–property relationships developed through both… read more here.
Keywords: methodology; component; die cast; approach die ... See more keywords
Analysis of the Mechanical Properties of Secondary AlZnMg(Cu) Die-Cast Alloys
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Metalcasting"
DOI: 10.1007/s40962-020-00510-6
Abstract: In this work, the development of AlZnMg(Cu) alloys was performed by thermodynamic simulations and experimental tests. With calculations, the solidification processes and phase compositions could be predicted. As secondary casting alloys, the selected compositions of… read more here.
Keywords: die; alznmg; alznmg die; die cast ... See more keywords
Experimental investigation on microstructure and mechanical properties of gravity-die-cast magnesium alloys
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2016.10.193
Abstract: Abstract The influence of various alloying elements (i.e., Sn, Al, Si, Mm, Sc) with different quantities on the microstructure and mechanical properties of gravity die cast magnesium alloys are investigated. Experimental evidences show that the… read more here.
Keywords: properties gravity; die cast; microstructure mechanical; mechanical properties ... See more keywords
Fault Investigations on Die-Cast Copper Rotors
Sign Up to like & getrecommendations! Published in 2018 at "IEEE Transactions on Industry Applications"
DOI: 10.1109/pedes.2016.7914285
Abstract: It has been known for a long time that replacement of aluminum by copper, which has an advantage in high conductivity, can be an economic solution for various applications including electric vehicle in the development… read more here.
Keywords: investigations die; die cast; copper; copper die ... See more keywords
A Study on High Strength, High Plasticity, Non-Heat Treated Die-Cast Aluminum Alloy
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma15010295
Abstract: The non-heat-treated, die-cast aluminum alloy samples were prepared meticulously via die-casting technology. The crystal structure, microstructure, and phase composition of the samples were comprehensively studied through electron backscatter diffraction (EBSD), metallographic microscopy, spectrometer, and transmission… read more here.
Keywords: heat; microscopy; die cast; cast aluminum ... See more keywords
The Effect of Solidification Rate on the Corrosion Resistance of Die-Cast AZ91 Magnesium Alloy
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15031259
Abstract: To increase the utilization of die-cast Mg alloys with various shapes in a variety of environments, the corrosion behaviors of commercial die-cast Mg alloys with different thicknesses were investigated in neutral and alkali solutions at… read more here.
Keywords: corrosion resistance; corrosion; solidification rate; die cast ... See more keywords
The Role of Mg Content and Aging Treatment on the Tensile and Fatigue Properties of Die-Cast 380 Alloy
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15248844
Abstract: The main objective of this contribution was to determine the impact of magnesium (Mg) concentration and solidification rate (about 800 °C/s) on the mechanical properties of commercial A380.1 die-cast alloy. Respective amounts of 0.10%, 0.30%,… read more here.
Keywords: role; die cast; fatigue; tensile ... See more keywords
Microstructure and Tensile Properties of the Mg-6Zn-4Al-xSn Die Cast Magnesium Alloy
Sign Up to like & getrecommendations! Published in 2019 at "Metals"
DOI: 10.3390/met9020113
Abstract: The effect of various Sn contents (1–2 wt. %) on the microstructure, age hardening response, and tensile and casting properties of the high-pressure die cast Mg-6Zn-4Al alloy were studied. All as-cast alloys consisted of α-Mg… read more here.
Keywords: tensile properties; 6zn 4al; die cast; addition ... See more keywords
Electrochemical Behavior of Conventional and Rheo-High-Pressure Die Cast Low Silicon Aluminum Alloys in NaCl Solutions
Sign Up to like & getrecommendations! Published in 2019 at "CORROSION"
DOI: 10.5006/3254
Abstract: The electrochemical behavior of a low silicon aluminum alloy cast by the conventional and rheo-high-pressure die cast processes is evaluated using polarization test and electrochemical impedance spectroscopy in 0.01 M, 0.05 M, 0.1 M, and 0.6 M sodium chloride… read more here.
Keywords: die cast; pressure die; high pressure; spectroscopy ... See more keywords