Time-dependent dielectric breakdown (TDDB) reliability analysis of CMOS analog and radio frequency (RF) circuits
Sign Up to like & getrecommendations! Published in 2018 at "Analog Integrated Circuits and Signal Processing"
DOI: 10.1007/s10470-018-1243-0
Abstract: In this paper, a methodology to analyze the time dependent dielectric breakdown (TDDB) reliability of CMOS analog and radio frequency (RF) circuits has been proposed and applied to common circuit building blocks, including an operational… read more here.
Keywords: analysis; topology; tddb; time dependent ... See more keywords
Enhancement of Dielectric Breakdown Strength and Energy Conversion Efficiency of Niobate Glass-Ceramics by Sc2O3 Doping
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Electronic Materials"
DOI: 10.1007/s11664-017-5868-z
Abstract: Niobate glass-ceramics K2O-SrO-Nb2O5-B2O3-Al2O3-SiO2 (KSN-BAS) doped with different amounts of Sc2O3 have been prepared through a melt quenching/controlled crystallization method, and the influence of the Sc2O3 content on their phase composition, microstructure, dielectric performance, and charge–discharge… read more here.
Keywords: niobate glass; glass; glass ceramics; breakdown strength ... See more keywords
Multiple-Nanopores Fabrication based on Dielectric Breakdown
Sign Up to like & getrecommendations! Published in 2017 at "Biophysical Journal"
DOI: 10.1016/j.bpj.2016.11.851
Abstract: Single molecule detection based on nanopore technology is becoming more and more established recently. Due to the Coulter counter and ion channels detection principle, single nanopore suffers from limitation of low throughput. Thus high-throughput nanopore… read more here.
Keywords: based dielectric; detection; nanopores fabrication; dielectric breakdown ... See more keywords
Dielectric breakdown strength of alumina ceramics reinforced by fractal dendritic Ca9Al(PO4)7 as the second crystalline phase
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.154811
Abstract: Abstract In polycrystalline ceramics, charge trapping property has important impact on the dielectric breakdown strength (DBS). In this work, alumina ceramics with Ca9Al(PO4)7(CAP) as the second crystalline phase were synthesized using coarse alumina as main… read more here.
Keywords: alumina; breakdown strength; fractal dendritic; dielectric breakdown ... See more keywords
Enhanced dielectric breakdown strength in Ni2O3 modified Al2O3-SiO2-TiO2 based dielectric ceramics
Sign Up to like & getrecommendations! Published in 2018 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2018.04.027
Abstract: Abstract Dielectric ceramics have raised particular interest since they enable pulsed-power systems to achieve high voltage gradient and compact miniaturization. In this work, x wt%Ni2O3 doped Al2O3-SiO2-TiO2 based dielectric ceramics were prepared using conventional solid-state… read more here.
Keywords: based dielectric; sio2 tio2; tio2 based; al2o3 sio2 ... See more keywords
Effect of pores on dielectric breakdown strength of alumina ceramics via surface and volume effects
Sign Up to like & getrecommendations! Published in 2020 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2020.03.024
Abstract: Abstract To investigate the effect of pores on the dielectric breakdown (DB) of alumina ceramics under AC voltage, we implant pores at different positions (surface, interior, and the whole body) of the ceramic samples by… read more here.
Keywords: breakdown strength; effect; dielectric breakdown; alumina ceramics ... See more keywords
Fabricating a denser SiO2-CaO co-doped 95 wt% alumina ceramic to verify that small pores have no effect on the dielectric breakdown strength of alumina ceramics
Sign Up to like & getrecommendations! Published in 2020 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2020.07.024
Abstract: Abstract To verify an increase in porosity due to small pores dose not reduce the dielectric breakdown strength (DBS) of alumina ceramics, we sinter a SiO2-CaO co-doped 95 wt% alumina ceramic via step-controlled atmosphere sintering (first… read more here.
Keywords: small pores; breakdown strength; sio2 cao; dielectric breakdown ... See more keywords
Laser induced dielectric breakdown for synthesis of chlorofluorosilanes
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Fluorine Chemistry"
DOI: 10.1016/j.jfluchem.2020.109692
Abstract: Abstract Tetrafluorosilane (SF4) and tetrachlorosilane (SiCl4) plasmas have been widely used as a source of either F or Cl for etching silicon or as a source of silicon for deposition of Si-based materials. Using different… read more here.
Keywords: temperature; laser induced; induced dielectric; dielectric breakdown ... See more keywords
Improved dielectric breakdown strength and suppressed energy loss in niobate glass-ceramics crystallized by microwave process
Sign Up to like & getrecommendations! Published in 2017 at "Materials Letters"
DOI: 10.1016/j.matlet.2017.01.002
Abstract: Abstract For pulsed power applications, the BaO–Na 2 O–Nb 2 O 5 –SiO 2 glass-ceramic dielectrics were prepared by two routes including the traditional heating method and the novel microwave process. And the effects of… read more here.
Keywords: breakdown strength; glass ceramics; dielectric breakdown; microwave process ... See more keywords
Dielectric breakdown of alumina thin films produced by pulsed direct current magnetron sputtering
Sign Up to like & getrecommendations! Published in 2018 at "Thin Solid Films"
DOI: 10.1016/j.tsf.2018.07.004
Abstract: Abstract Alumina films (~2 μm thick) were deposited with a mixed Cu/Al interlayer onto copper. Direct current (DC)/Pulsed DC (PDC) magnetron sputtering techniques were independently compared for reactive alumina sputtering. In DC sputtered films, elemental aluminium… read more here.
Keywords: magnetron sputtering; alumina; breakdown alumina; dielectric breakdown ... See more keywords
Dielectric breakdown along c-axis boundaries in magnetoelectric O2O3 for spintronic devices
Sign Up to like & getrecommendations! Published in 2017 at "Microscopy and Microanalysis"
DOI: 10.1017/s1431927617007875
Abstract: Voltage controlled boundary magnetism is crucial for spintronic devices with reduced power consumption. Magnetoelectric and antiferromagnetic Cr2O3 is an ideal material due to its electric field switching of nonvolatile boundary magnetism [1]. The boundary magnetization… read more here.
Keywords: cr2o3; breakdown along; spintronic devices; breakdown field ... See more keywords