Relationships between Raman parameters obtained from cyclic indentation impressions on DLC coatings
Sign Up to like & getrecommendations! Published in 2020 at "Surface and Interface Analysis"
DOI: 10.1002/sia.6780
Abstract: Diamond‐like carbon (DLC) coatings were indented 3000 to 15 000 times cyclically using a Si3N4 sphere having a diameter of 10 mm under a normal load of approximately 107 N. DLC coatings were prepared by… read more here.
Keywords: obtained cyclic; raman parameters; spectroscopy; dlc coatings ... See more keywords
DLC-coating Application to Improve the Durability of Ceramic Tools
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04149-1
Abstract: The work is devoted to the experimental study of the efficiency of Arc-PVD and PACVD industrial technologies for the application of diamond-like carbon (DLC) coatings on ceramic cutting plates based on Al2O3 + TiC to… read more here.
Keywords: dlc coating; coating application; durability ceramic; dlc ... See more keywords
Dry sheet metal forming of aluminum by smooth DLC coatings – a capable approach for an efficient production process with reduced environmental impact
Sign Up to like & getrecommendations! Published in 2020 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2020.02.140
Abstract: Abstract Currently a high amount of lubricants is used in aluminum forming processes to ensure a long tool lifetime and a high product quality. These technological and economical goals are traded for a negative environmental… read more here.
Keywords: impact; forming aluminum; reduced environmental; environmental impact ... See more keywords
High-ion-energy and low-temperature deposition of diamond-like carbon (DLC) coatings with pulsed kV bias
Sign Up to like & getrecommendations! Published in 2019 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2018.08.099
Abstract: Abstract The high ion energy produced by the substrate bias is essential to the enhancement of the sp3 content in diamond-like carbon (DLC) coatings and adhesion with the substrate. However, excessive ion energy can turn… read more here.
Keywords: high ion; ion energy; dlc coatings; ion ... See more keywords
Synergistic effect of plasma nitriding and bias voltage on the adhesion of diamond-like carbon coatings on M2 steel by PECVD
Sign Up to like & getrecommendations! Published in 2019 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2019.06.014
Abstract: Abstract Diamond-like carbon (DLC) coatings have excellent mechanical and tribological properties, as well as good wear and corrosion resistance. They are well established in medical, metalworking and automotive applications. However, further improvements are needed and… read more here.
Keywords: steel; diamond like; microscopy; adhesion ... See more keywords
Effect of deposition pressures on uniformity, mechanical and tribological properties of thick DLC coatings inside of a long pipe prepared by PECVD method
Sign Up to like & getrecommendations! Published in 2019 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2019.07.030
Abstract: Abstract Diamond-like carbon (DLC) coatings, as an excellent wear-resistant and low friction material, have been successfully applied as the surface protection and lubrication of various components. Recently, its application in the pipe fittings has gradually… read more here.
Keywords: thick dlc; pecvd; deposition pressures; dlc coatings ... See more keywords
Friction wear characteristics of diamond-like carbon coatings in oils containing molybdenum dialkyldithiocarbamate additive
Sign Up to like & getrecommendations! Published in 2018 at "Wear"
DOI: 10.1016/j.wear.2018.08.004
Abstract: Abstract Diamond-like carbon (DLC) coatings are typically used to reduce the friction of sliding parts in automobiles. However, the utilization of DLC coatings in oils containing molybdenum dithiocarbamate (MoDTC) additive causes severe wear of these… read more here.
Keywords: carbon; like carbon; diamond like; dlc coatings ... See more keywords
Triboelectrochemical friction control of W- and Ag-doped DLC coatings in water–glycol with ionic liquids as lubricant additives
Sign Up to like & getrecommendations! Published in 2022 at "RSC Advances"
DOI: 10.1039/d1ra08814a
Abstract: In the last years, diamond like carbon (DLC) coatings doped with both carbide forming and non-carbide forming metallic elements have attracted great interest as novel self-lubricating coatings. Due to the inherent properties of DLC, the… read more here.
Keywords: water; dlc; friction; dlc coatings ... See more keywords
Surface Roughness Influence on Tribological Behavior of HiPIMS DLC Coatings
Sign Up to like & getrecommendations! Published in 2023 at "Tribology Transactions"
DOI: 10.1080/10402004.2023.2197472
Abstract: Abstract The application of diamond-like carbon (DLC) coatings in dry machining of difficult-to-machine materials has been gaining popularity due to high inertness, low coefficient of friction (COF), and high hardness of these coatings. Although the… read more here.
Keywords: dlc coatings; surface roughness; due high; roughness influence ... See more keywords
Enhancement in the corrosive and tribological properties of the inner wall of 6063Al and CI pipes by thick multilayer Si-DLC coatings
Sign Up to like & getrecommendations! Published in 2019 at "Materials Research Express"
DOI: 10.1088/2053-1591/ab28f1
Abstract: Corrosion and wear on the inner wall of metal pipes is considered as a challenging issue for their service lifetime in application of delivery systems. Diamond-like Carbon (DLC) coating is a widely investigated material and… read more here.
Keywords: inner wall; dlc dlc; 6063al pipes; dlc ... See more keywords
Hydrogen permeability of diamondlike amorphous carbons
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Vacuum Science and Technology"
DOI: 10.1116/1.4977106
Abstract: The hydrogen barrier properties of the coatings of nitride and diamondlike amorphous carbon (DLC) were evaluated. Using plasma chemical vapor deposition and sputtering, ZrN, TiAlN, AlCrN, CrN, and DLC coatings were deposited with a thickness… read more here.
Keywords: high hydrogen; hydrogen barrier; hydrogen; trap sites ... See more keywords