LAUSR

About LAUSR
Donate
Contact Us

Follow us:

You are not signed in:

Sign Up!


   Articles with "double cantilever" as a keyword



Photo by dawson2406 from unsplash

Fracture behavior of adhesive interface at TDCB aluminum foam specimen with the type of Mode III

Sign Up to like & get
recommendations! Published in 2017 at "International Journal of Precision Engineering and Manufacturing"

DOI: 10.1007/s12541-017-0084-6

Abstract: In this study, the fracture property is investigated with the configuration of tapered double cantilever beam different from that of the existing double cantilever beam. Aluminum TDCB (Tapered Double Cantilever Beam) specimens of mode III-type… read more here.

Keywords: tdcb; fracture; analysis; double cantilever ... See more keywords
Photo from wikipedia

Mode I delamination onset in carbon fibre reinforced SiC: Double cantilever beam testing and cohesive zone modelling

Sign Up to like & get
recommendations! Published in 2017 at "Engineering Fracture Mechanics"

DOI: 10.1016/j.engfracmech.2017.05.018

Abstract: Abstract Delaminations are critical defects to the structural integrity of ceramic matrix composite (CMC) structures. They may be induced during processing due to differing shrinkage of fibres and matrix. The focus of this work is… read more here.

Keywords: energy release; double cantilever; cantilever beam; fibre reinforced ... See more keywords
Photo by julianhochgesang from unsplash

An analytical solution for double cantilever beam based on elastic–plastic bilinear cohesive law: Analysis for mode I fracture of fibrous composites

Sign Up to like & get
recommendations! Published in 2018 at "Engineering Fracture Mechanics"

DOI: 10.1016/j.engfracmech.2018.02.019

Abstract: Abstract The most difficult problem in mode I fracture test for fibrous composites using double cantilever beam (DCB) specimen is to identify crack tip without ambiguity. Consequently to evaluate fracture toughness through compliance method is… read more here.

Keywords: fracture; fibrous composites; double cantilever; analytical solution ... See more keywords
Photo from wikipedia

Dynamic interfacial fracture of a double cantilever beam

Sign Up to like & get
recommendations! Published in 2020 at "Engineering Fracture Mechanics"

DOI: 10.1016/j.engfracmech.2018.11.033

Abstract: Abstract Assessment of the energy release rate (ERR) of layered material structures with account for dynamic and vibration effects is important for understanding and predicting fracture behavior in various engineering applications. In this work, the… read more here.

Keywords: double cantilever; vibration; fracture; cantilever beam ... See more keywords
Photo by julianhochgesang from unsplash

Double cantilever-beam test comparisons of Mode I fracture toughness of adherends bonded using DP8010 and DP8005 acrylic-based adhesives

Sign Up to like & get
recommendations! Published in 2018 at "International Journal of Adhesion and Adhesives"

DOI: 10.1016/j.ijadhadh.2018.01.008

Abstract: Abstract The aim of this study is to not only measure the fracture toughness (GIC) of adherends bonded with a DP8010 acrylic-based adhesive using double cantilever beam (DCB) specimens under Mode I loading, but also… read more here.

Keywords: adherends bonded; double cantilever; dp8010 dp8005; fracture toughness ... See more keywords
Photo by sirsimo from unsplash

Cohesive zone and interfacial thick level set modeling of the dynamic double cantilever beam test of composite laminate

Sign Up to like & get
recommendations! Published in 2018 at "Theoretical and Applied Fracture Mechanics"

DOI: 10.1016/j.tafmec.2018.07.004

Abstract: Abstract The mode-I interlaminar fracture toughness of composite laminates under different loading rates can be measured by the double cantilever beam (DCB) test. It is observed from the DCB test of a unidirectional PEEK/carbon composite… read more here.

Keywords: cohesive zone; double cantilever; cantilever beam; rate ... See more keywords
Photo by terri_bleeker from unsplash

Double-L Cantilever-Based Fiber Bragg Grating Accelerometer

Sign Up to like & get
recommendations! Published in 2019 at "IEEE Sensors Journal"

DOI: 10.1109/jsen.2019.2936463

Abstract: Optical accelerometers, especially the fiber Bragg grating accelerometers are the preferred sensors for vibration, and acceleration measurement in several fields of engineering. They are light, compact, immune to electromagnetic interference, and provide better noise immunity… read more here.

Keywords: grating accelerometer; based fiber; double cantilever; cantilever based ... See more keywords
Photo by philinit from unsplash

Influence of cyclic aging on adhesive mode mixity in dissimilar composite/metal double cantilever beam joints

Sign Up to like & get
recommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications"

DOI: 10.1177/14644207221074696

Abstract: The adhesive layer in the adhesive joints can experience different modes of loading. Although the fracture energy of adhesive is generally considered to be a material parameter, it is found to be a function of… read more here.

Keywords: cyclic aging; double cantilever; mode mixity; cantilever beam ... See more keywords
Photo from wikipedia

WATER DIFFUSION IN DOUBLE CANTILEVER BEAM ADHESIVE JOINTS

Sign Up to like & get
recommendations! Published in 2017 at "Latin American Journal of Solids and Structures"

DOI: 10.1590/1679-78253040

Abstract: STRUCTURAL ADHESIVES ARE INCREASINGLY BEING USED IN THE AEROSPACE AND AUTOMOTIVE INDUSTRIES. THEY ALLOW FOR LIGHT WEIGHT VEHICLES, FUEL SAVINGS AND REDUCED EMISSIONS. HOWEVER, THE ENVIRONMENTAL DEG-RADATION OF ADHESIVE JOINTS IS A MAJOR SETBACK IN… read more here.

Keywords: diffusion; water; double cantilever; cantilever beam ... See more keywords