Articles with "drx" as a keyword



Hot Deformation and Dynamic Recrystallization of 18%Mn Twinning‐Induced Plasticity Steels

Sign Up to like & get
recommendations!
Published in 2020 at "Advanced Engineering Materials"

DOI: 10.1002/adem.202000098

Abstract: The deformation behavior of 18%Mn twinning‐induced plasticity (TWIP) steels with 0.4%C or 0.6%C is studied by means of isothermal compression tests in the temperature range of 973–1373 K at the strain rates of 10−3–10−1 s−1. The hot… read more here.

Keywords: twinning induced; dynamic recrystallization; induced plasticity; drx ... See more keywords

Hot‐Compression Behavior of Two ZK60 Magnesium Alloys with Micron and Submicron Grains

Sign Up to like & get
recommendations!
Published in 2025 at "Advanced Engineering Materials"

DOI: 10.1002/adem.202402911

Abstract: This study mainly investigates the hot compression behavior and dynamic recrystallization (DRX) mechanisms of fine‐grained (FG) and coarse‐grained (CG) ZK60 magnesium alloys, revealing significant differences in their deformation characteristics and microstructural evolution. Under hot compression,… read more here.

Keywords: magnesium alloys; drx; hot compression; zk60 ... See more keywords

Dynamic Recrystallization and Phase Precipitation Behavior in Ti‐55531 Alloy During Through‐Transus Forging

Sign Up to like & get
recommendations!
Published in 2025 at "Advanced Engineering Materials"

DOI: 10.1002/adem.202501541

Abstract: The dynamic recrystallization (DRX) and α‐phase precipitation behavior of the Ti‐55531 titanium alloy during through‐transus forging are systematically investigated. The results indicate that flow characteristics are closely related to recrystallization mechanism, and the influence of… read more here.

Keywords: dynamic recrystallization; drx; deformation; alloy ... See more keywords

Fluorination Enhanced Surface Stability of Disordered Rocksalt Cathodes.

Sign Up to like & get
recommendations!
Published in 2021 at "Advanced materials"

DOI: 10.1002/adma.202106256

Abstract: Cation-disordered rocksalt (DRX) oxides are a promising new class of high-energy-density cathode materials for next-generation Li-ion batteries. However, their capacity fade during cycling presents a major challenge. Partial fluorine (F) substitution into oxygen (O) lattice… read more here.

Keywords: disordered rocksalt; surface stability; surface; fluorination ... See more keywords

Redox Engineering of Fe‐Rich Disordered Rock‐Salt Li‐Ion Cathode Materials

Sign Up to like & get
recommendations!
Published in 2024 at "Advanced Energy Materials"

DOI: 10.1002/aenm.202400402

Abstract: The pursuit of high‐performance and cost‐effective Li‐ion batteries emphasizes the need for cathode materials composed of abundant elements, such as Fe. Disordered rock‐salt (DRX) cathode materials, known for their high compositional flexibility, offer a unique… read more here.

Keywords: redox; drx; cathode materials; redox engineering ... See more keywords

Comparative Study of Power Saving and Delay in LTE DRX, Directional-DRX and Hybrid-Directional DRX

Sign Up to like & get
recommendations!
Published in 2018 at "Wireless Personal Communications"

DOI: 10.1007/s11277-017-5015-4

Abstract: With integration of advanced long term evolution networks (LTE networks) in mobile technology, 5G networks are introduced due to broadband spectrum extension which requires higher power consumption. Discontinuous reception (DRX) sleep mode mechanism is provided… read more here.

Keywords: power saving; hybrid directional; drx; directional drx ... See more keywords

Electron Backscattered Diffraction Study of Microstructural Evolution During Isothermal Deformation of High-N Mn18Cr18 Alloy

Sign Up to like & get
recommendations!
Published in 2019 at "Metallurgical and Materials Transactions B"

DOI: 10.1007/s11663-019-01606-z

Abstract: In order to understand the dynamic recrystallization (DRX) mechanism of Mn18Cr18N austenitic stainless steel during hot deformation, the investigation of microstructure evolution is significant. Isothermal compression tests were conducted on a Gleeble-3500 thermomechanical simulator in… read more here.

Keywords: evolution; drx; deformation; backscattered diffraction ... See more keywords

Effect of the Zener-Hollomon parameter on the dynamic recrystallization kinetics of Mg–Zn–Zr–Yb magnesium alloy

Sign Up to like & get
recommendations!
Published in 2019 at "Computational Materials Science"

DOI: 10.1016/j.commatsci.2019.05.015

Abstract: Abstract The isothermal compression tests for as-homogenized Mg–5.8 Zn–0.5 Zr–1.0 Yb magnesium alloy were performed on a Gleeble-1500 thermo-mechanical simulator at the temperatures of 250, 300, 350 and 400 °C and the strain rates of 0.001,… read more here.

Keywords: zener hollomon; dynamic recrystallization; hollomon parameter; magnesium alloy ... See more keywords

Strain localization and dynamic recrystallization in polycrystalline metals: Thermodynamic theory and simulation framework

Sign Up to like & get
recommendations!
Published in 2019 at "International Journal of Plasticity"

DOI: 10.1016/j.ijplas.2019.03.005

Abstract: Abstract We describe a theoretical and computational framework for adiabatic shear banding (ASB) and dynamic recrystallization (DRX) in polycrystalline materials. The Langer-Bouchbinder-Lookman (LBL) thermodynamic theory of polycrystalline plasticity, which we recently reformulated to describe DRX… read more here.

Keywords: framework; drx; strain localization; polycrystalline ... See more keywords

Abnormal dynamic recrystallization behavior of a nickel based superalloy during hot deformation

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2019.02.055

Abstract: Abstract The dependence of hot deformation behavior and microstructure evolution of IN718 alloy on strain rate were studied by isothermal compression experiments. The tests were performed under the strain rates range of 10−2 s−1 ∼… read more here.

Keywords: drx; hot deformation; strain; strain rate ... See more keywords

Effect of Mn addition on deformation behaviour of 23% Cr low nickel duplex stainless steel

Sign Up to like & get
recommendations!
Published in 2018 at "Materials Characterization"

DOI: 10.1016/j.matchar.2018.07.028

Abstract: Abstract Isothermal compression testing of 23% Cr low nickel duplex stainless steels, with different Mn concentrations, was investigated in the temperature range of 1173–1423 K, the strain rate range of 0.01–10 s−1 and with a height reduction… read more here.

Keywords: duplex stainless; addition; drx; nickel duplex ... See more keywords