Dual Additive for Simultaneous Improvement of Photovoltaic Performance and Stability of Perovskite Solar Cell
Sign Up to like & getrecommendations! Published in 2021 at "Advanced Functional Materials"
DOI: 10.1002/adfm.202100396
Abstract: Additive engineering is one of the most efficient approaches to improve not only photovoltaic performance but also phase stability of formamidinium (FA)‐based perovskite. Chlorine‐based additives, such as methylammonium chloride (MACl), have been in general used… read more here.
Keywords: macl; photovoltaic performance; cscl; dual additive ... See more keywords
Synergistic Dual‐Additive Tailored Robust Interphase toward Enhanced Cyclability of Prussian Blue Cathode for K+ Storage
Sign Up to like & getrecommendations! Published in 2024 at "Advanced Functional Materials"
DOI: 10.1002/adfm.202417243
Abstract: Fe‐based Prussian blue analogs (KFeHCF) are considered as the most promising cathode materials for potassium‐ion batteries (KIBs) owing to their low cost and high energy density. However, the unstable cathode electrolyte interphase (CEI) typically leads… read more here.
Keywords: interphase; cathode; synergistic dual; additive tailored ... See more keywords
Highly Adaptable Electrode–Electrolyte Interphases Constructed by Dual‐Additive‐Optimized Electrolyte for 4.5 V Lithium Metal Batteries
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Functional Materials"
DOI: 10.1002/adfm.202501489
Abstract: Lithium metal batteries (LMBs) with Li metal anodes and high‐voltage LiCoO2 (LCO) cathodes offer high energy density but face challenges such as Li dendrite growth and LCO structure degradation, which primarily arises from the electrolyte's… read more here.
Keywords: lithium; lithium metal; metal batteries; electrolyte ... See more keywords
Dual‐Additive Strategy with α‐Cyclodextrin Molecular Sieving and LiDFOB Interface Engineering for Stable NCM811||Li Batteries in Ether Electrolytes
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Functional Materials"
DOI: 10.1002/adfm.202521748
Abstract: Lithium metal batteries (LMBs) employing lithium metal anodes paired with nickel‐rich layered oxide cathodes, such as LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NCM811), are attractive due to their high energy density. However, they… read more here.
Keywords: additive strategy; cyclodextrin molecular; strategy cyclodextrin; interface ... See more keywords
Dual‐Additive‐Driven Boron‐Enriched Interphases Stabilize Tetrahydrofuran‐Based Electrolytes for High‐Voltage Sodium‐Ion Batteries
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Functional Materials"
DOI: 10.1002/adfm.202523515
Abstract: The advancement of energy storage systems heavily relies on the development of high‐performance electrolytes. Nonetheless, conventional electrolytes often struggle with interfacial stability, ionic conductivity, and electrochemical compatibility. Cyclic ether solvents, such as tetrahydrofuran (THF), despite… read more here.
Keywords: boron enriched; sodium ion; voltage; high voltage ... See more keywords
Perovskite Light-Emitting Diodes with EQE Exceeding 28% through a Synergetic Dual-Additive Strategy for Defect Passivation and Nanostructure Regulation.
Sign Up to like & getrecommendations! Published in 2021 at "Advanced materials"
DOI: 10.1002/adma.202103268
Abstract: Quasi-2D perovskites have long been considered to have favorable "energy funnel/cascade" structures and excellent optical properties compared with their 3D counterparts. However, most quasi-2D perovskite light-emitting diodes (PeLEDs) exhibit high external quantum efficiency (EQE) but… read more here.
Keywords: dual additive; perovskite light; synergetic dual; emitting diodes ... See more keywords
Dual-Additive Assisted Chemical Vapor Deposition for the Growth of Mn-Doped 2D MoS2 with Tunable Electronic Properties.
Sign Up to like & getrecommendations! Published in 2019 at "Small"
DOI: 10.1002/smll.201903181
Abstract: Doping of bulk silicon and III-V materials has paved the foundation of the current semiconductor industry. Controlled doping of 2D semiconductors, which can also be used to tune their bandgap and type of carrier thus… read more here.
Keywords: dual additive; chemical vapor; vapor deposition; doped mos2 ... See more keywords
Dual Additive Strategy for Ambient Blade-Coated MAPbI3 Using a Green Ionic Liquid Solvent: Towards Fully Printable Perovskite Solar Cells with Carbon Electrodes
Sign Up to like & getrecommendations! Published in 2025 at "New Journal of Chemistry"
DOI: 10.1039/d5nj03030g
Abstract: In this study, a blade-coating technique was used to deposit MAPbI3 perovskite films using methylammonium acetate (MAAc), a green protic ionic liquid, under ambient conditions. Replacing toxic solvents like dimethyl... read more here.
Keywords: mapbi3; ambient; additive strategy; ionic liquid ... See more keywords
Enhancing Laser Damage Resistance in TiO2 Films: Dual-Additive Strategy Using High Thermal Conductivity Agents and Long-Chain Organic Compounds
Sign Up to like & getrecommendations! Published in 2025 at "Photonics"
DOI: 10.3390/photonics12080742
Abstract: The laser damage resistance of optical films holds significant practical importance, as it largely determines both the maximum power output of laser systems and the overall stability of the entire optical assembly. A comprehensive investigation… read more here.
Keywords: laser; peg 200; dea; damage ... See more keywords