Effect of the addition of sepiolite on the morphology and properties of melt compounded PHBV/PLA blends
Sign Up to like & getrecommendations! Published in 2019 at "Polymer Composites"
DOI: 10.1002/pc.24538
Abstract: A study concerning the incorporation of sepiolite in blends of biopolyesters (PHBV/PLA) to obtain clay/polymer nanocomposites (CPN) was performed to improve the gas barrier performance of the final materials and achieve a well dispersed morphology… read more here.
Keywords: addition sepiolite; pla; phbv pla; effect addition ... See more keywords
Erratum to: Effect of the addition of nano-sized sodium hexametaphosphate to fluoride toothpastes on tooth demineralization: an in vitro study
Sign Up to like & getrecommendations! Published in 2017 at "Clinical Oral Investigations"
DOI: 10.1007/s00784-017-2116-0
Abstract: Department of Pediatric Dentistry and Public Health Sao Paulo State University (Unesp) School of Dentistry, Rua Jose Bonifacio 1193 read more here.
Keywords: sodium hexametaphosphate; addition nano; nano sized; erratum effect ... See more keywords
Effect of Cr addition on γ–γ′ cobalt-based Co–Mo–Al–Ta class of superalloys: a combined experimental and computational study
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science"
DOI: 10.1007/s10853-017-1159-6
Abstract: The present article deals with effect of Cr addition (10 at.%) on the partitioning behavior and the consequent effect on mechanical properties for tungsten-free γ–γ′ cobalt-based superalloys with base alloy compositions of Co–30Ni–10Al–5Mo–2Ta (2Ta) and Co–30Ni–10Al–5Mo–2Ta–2Ti… read more here.
Keywords: addition cobalt; cobalt based; addition; effect ... See more keywords
Effect of Mn Addition on Melt Purification and Fe Tolerance in Mg Alloys
Sign Up to like & getrecommendations! Published in 2021 at "JOM"
DOI: 10.1007/s11837-020-04550-5
Abstract: Two methods for impeding the detrimental impact of iron (Fe) impurity in magnesium (Mg) alloys on the corrosion properties are studied: the addition of manganese (Mn) and the selection of melting temperature. Experimental work was… read more here.
Keywords: tolerance; melt purification; addition; addition melt ... See more keywords
Effect of Cu Addition on the Microstructure and Mechanical Properties of U-MIG Welds on Galvanized Steel Sheets
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Shanghai Jiaotong University (Science)"
DOI: 10.1007/s12204-021-2328-y
Abstract: Ultrasonic-assisted metal inert gas (U-MIG) welding experiments were performed to analyze the effect of Cu addition on the microstructure and mechanical properties of galvanized steel sheet welds, and first-principles calculations were undertaken to predict the… read more here.
Keywords: addition microstructure; microstructure mechanical; effect; mechanical properties ... See more keywords
Effect of Ti Addition on the Microstructure and Property of FeAlCuCrNiMo0.6 High-Entropy Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Acta Metallurgica Sinica (english Letters)"
DOI: 10.1007/s40195-020-01019-x
Abstract: FeAlCuCrNiMo0.6Tix (x = 0.2, 0.6, 0.8) high-entropy alloys were fabricated with flux-cored wire and surfaced on low-carbon steel by gas metal arc welding. The effect of Ti addition on the microstructures and properties of FeAlCuCrNiMo0.6Tix HEAs surfacing… read more here.
Keywords: surfacing layer; addition; corrosion; high entropy ... See more keywords
Effect of Zn addition on the structure and electrochemical properties of co-doped BaCe0.6Zr0.2Ln0.2O3-δ (Ln=Y, Gd, Yb) proton conductors
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.05.010
Abstract: Abstract In this work, BaCe0.6Zr0.2Y0.2-xYbxO3-δ and BaCe0.6Zr0.2Gd0.2-xYbxO3-δ (x = 0–0.20), proton conducting materials are prepared by the freeze-drying precursor method. The sintering conditions were optimized by adding Zn(NO3)2·6H2O as sintering additive. The materials are thoroughly characterized by… read more here.
Keywords: proton; structure; addition structure; bace0 6zr0 ... See more keywords
Effect of the addition of TiO2 nanoparticles in alkali-activated materials
Sign Up to like & getrecommendations! Published in 2020 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2020.118370
Abstract: Abstract Nowadays, alkali-activated binders have become one of the most viable options in the reduction of CO2 emissions; receiving considerable attention due to favorable mechanical properties and low energy consumption. Following from that, the effect… read more here.
Keywords: addition tio2; nanoparticles alkali; alkali activated; tio2 nanoparticles ... See more keywords
Effect of the addition of hydrocolloids on beef texture: Targeted to the needs of people with dysphagia
Sign Up to like & getrecommendations! Published in 2020 at "Food Hydrocolloids"
DOI: 10.1016/j.foodhyd.2020.106413
Abstract: Abstract This study evaluated the effect of addition of 14 different hydrocolloids that are commonly used in meat industry as texture modifiers, with a view to screen and categorise, hydrocolloid added beef patties within the… read more here.
Keywords: beef; texture; beef patties; effect addition ... See more keywords
Effect of Ta addition on solidification characteristics of CoCrFeNiTax eutectic high entropy alloys
Sign Up to like & getrecommendations! Published in 2020 at "Intermetallics"
DOI: 10.1016/j.intermet.2020.106769
Abstract: Abstract Effect of Ta addition on solidification characteristics of CoCrFeNiTax (x = 0.1–0.7) eutectic high entropy alloys were investigated. With increasing Ta content, CoCrFeNiTax alloys changed from hypoeutectic alloys with primary γ phase to eutectic alloy (x = 0.43)… read more here.
Keywords: cocrfenitax eutectic; addition solidification; solidification; solidification characteristics ... See more keywords
Effect of Zn addition on dynamic recrystallization behavior of Mg-2Gd alloy during high-temperature deformation
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.07.347
Abstract: Abstract The effect of Zn/Gd ratio on dynamic recrystallization (DRX) of Mg–2Gd–xZn (x = 0, 1, 2 and 3 wt%) alloys was investigated by shear punch tests in the temperature range of 623–723 K and shear strain rate range… read more here.
Keywords: dynamic recrystallization; recrystallization; effect addition; alloy ... See more keywords