Effect of Ga content on the properties of CuGaS precursor thin films produced by electrochemical Co-deposition
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-016-6298-z
Abstract: Cu–Ga–S ternary thin films were produced by one-step co-electrochemical deposition from an aqueous deposition bath consisting CuCl2, GaCl3 and Na2S2O3 as precursor, and LiCl. The pH of the deposition solution was adjusted to 2.0 adding… read more here.
Keywords: thin films; electrochemical deposition; deposition; films produced ... See more keywords
The Effect of Pt Content on the Scale Development on β-NiAl at Very Early Oxidation Stages
Sign Up to like & getrecommendations! Published in 2017 at "Oxidation of Metals"
DOI: 10.1007/s11085-017-9714-8
Abstract: Very early stages of development of the oxide scale formed in air at 1150° on unmodified and containing varying amounts of Pt (5, 10 and 15 at.%) β-NiAl intermetallic compound were studied. The scale morphology was… read more here.
Keywords: oxidation; content scale; effect content; development ... See more keywords
Effect of Cr content on the passivation behavior of Cr alloy steel in a CO2 aqueous environment containing silty sand
Sign Up to like & getrecommendations! Published in 2020 at "Corrosion Science"
DOI: 10.1016/j.corsci.2020.108591
Abstract: Abstract The effect of Cr content in steel on its passivation behavior in a CO2 aqueous environment containing silty sand was investigated. The results indicated that the stability of passive film was improved with increasing… read more here.
Keywords: silty sand; steel; effect content; silty ... See more keywords
Effect of WC–Co content on the microstructure and properties of NiCrBSi composite coatings fabricated by supersonic plasma spraying
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.02.290
Abstract: Abstract This paper presents our detailed investigation into the effect of the WC–Co content on the microstructure and properties of supersonic plasma sprayed NiCrBSi composite coatings on Inconel 718. The results showed that the NiCrBSi/WC–Co… read more here.
Keywords: microstructure properties; effect content; microstructure; supersonic plasma ... See more keywords
Effect of Al content on the high-temperature oxidation behavior of 18Cr–Al–Si ferritic heat-resistant stainless steel
Sign Up to like & getrecommendations! Published in 2021 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2021.02.024
Abstract: Abstract The effect of Al content on the high-temperature oxidation (800 and 900 °C) of 18Cr–Al–Si FHSS (ferritic heat-resistant stainless steel) for up to 180 h in air was investigated via the isothermal oxidation method. The oxidation… read more here.
Keywords: oxidation; content high; effect content; ferritic heat ... See more keywords
Effect of the Ni content on the thermal and magnetic properties of Fe–Ni–Co alloys
Sign Up to like & getrecommendations! Published in 2021 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2020.124215
Abstract: Abstract In this study, the influence of the Ni content on the phase transformations of FeNiCo alloys was evaluated by analyzing seven different alloys with Fe-x%at.Ni-10%at.Co composition, in which x = 30, 24.5, 20, 15,… read more here.
Keywords: properties alloys; content thermal; magnetic properties; effect content ... See more keywords
Effect of Sc content on microstructure and properties of Al-Zn-Mg-Cu-Zr alloy
Sign Up to like & getrecommendations! Published in 2020 at "Materials today communications"
DOI: 10.1016/j.mtcomm.2020.101899
Abstract: Abstract The effect of Sc content on microstructure and properties of Al-Zn-Mg-Cu-Zr alloy was studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), optical microscopy (OM), tensile tests, hardness measurements and corrosion evaluation. It… read more here.
Keywords: properties alloy; microscopy; microstructure properties; content microstructure ... See more keywords
Effect of Ni content on the transformation behavior and mechanical property of NiTi shape memory alloys fabricated by laser powder bed fusion
Sign Up to like & getrecommendations! Published in 2021 at "Optics and Laser Technology"
DOI: 10.1016/j.optlastec.2020.106653
Abstract: Abstract In this study, three NiTi shape memory alloys with different Ni atomic percentage (50.73, 50.93 and 51.27 at%) were fabricated by laser powder bed fusion (L-PBF). The effect of Ni content on phase transformation… read more here.
Keywords: shape memory; content; transformation; effect ... See more keywords
Effect of Si content on interfacial reaction and properties between solid steel and liquid aluminum
Sign Up to like & getrecommendations! Published in 2021 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(21)65676-5
Abstract: Abstract The effect of Si content on the microstructures and growth kinetics of intermetallic compounds (IMCs) formed during the initial interfacial reaction ( read more here.
Keywords: content interfacial; interfacial reaction; effect content; reaction properties ... See more keywords
Effect of Si content on structure and electrochemical performance of ternary nanohybrids integrating Si nanoparticles, N-doped carbon shell, and nitrogen-doped graphene
Sign Up to like & getrecommendations! Published in 2017 at "RSC Advances"
DOI: 10.1039/c6ra26994j
Abstract: Hybridizing graphene with silicon (Si) is effective in developing high-performance Si-based anodes. However, the effect of Si content on the structure and electrochemical performance of these nanohybrids has not been extensively studied. Herein, a type… read more here.
Keywords: effect content; structure electrochemical; electrochemical performance; performance ... See more keywords
Synergistic effect of Pd content and polyelectrolyte multilayer structure on nitrobenzene hydrogenation in a microreactor
Sign Up to like & getrecommendations! Published in 2019 at "RSC Advances"
DOI: 10.1039/c9ra02648g
Abstract: In this study, we developed a Pd–PEMs hybrid film grafted on the polydopamine coated interior wall of a microreactor for nitrobenzene hydrogenation. read more here.
Keywords: content polyelectrolyte; microreactor; nitrobenzene hydrogenation; effect content ... See more keywords