Effect of Cooling Rate on Precipitation Behavior of Al–7.65Zn–2.59Mg–1.95Cu Alloy with Minor Elements of Zr and Ti
Sign Up to like & getrecommendations! Published in 2019 at "Metals and Materials International"
DOI: 10.1007/s12540-019-00385-1
Abstract: Abstract We investigate the effect of cooling rate on the precipitation behavior during cooling from solution treatment temperature and post-aging of a high-strength Al–7.65Zn–2.59Mg–1.95Cu–0.11Zr–0.04Ti extruded alloy. Solution treatment at 450 °C caused the partial dissolution and… read more here.
Keywords: cooling rate; precipitation; effect cooling; solution treatment ... See more keywords
Study of the effect of the cooling and lubricant fluid on the cutting performance of dimension stone through artificial intelligence models
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Science and Technology, an International Journal"
DOI: 10.1016/j.jestch.2019.04.012
Abstract: Abstract In this study aims to provide an accurate practical anticipation model for investigating the effect of cooling and lubricant fluid on the cutting performance with a special emphasis on the consumed electrical current as… read more here.
Keywords: effect cooling; cooling lubricant; performance; lubricant fluid ... See more keywords
Effect of cooling rate on the phase structure and magnetic properties of Fe 26.7 Co 28.5 Ni 28.5 Si 4.6 B 8.7 P 3 high entropy alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Magnetism and Magnetic Materials"
DOI: 10.1016/j.jmmm.2017.04.017
Abstract: Abstract The effect of cooling rate on phase structure and magnetic properties of the Fe26.7Co28.5Ni28.5Si4.6B8.7P3 high entropy alloy (HEA) was investigated. The HEA forms into amorphous phase by melt spinning method at high cooling rate… read more here.
Keywords: phase; effect cooling; rate phase; magnetic properties ... See more keywords
Effect of cooling rate on the microstructure of rapidly solidified SiGe
Sign Up to like & getrecommendations! Published in 2019 at "Materials Characterization"
DOI: 10.1016/j.matchar.2019.06.014
Abstract: Abstract Si-30 wt% Ge (14.2 at.% Ge) alloy has been subject to rapid solidification by drop-tube processing, with the resulting powders being subject to cooling rates between 1800 and 20,000 K s −1 . Microstructure characterisation was conducted via… read more here.
Keywords: effect cooling; cooling rate; grain boundaries; microstructure ... See more keywords
Effect of cooling rate on precipitation during homogenization cooling in excess Si type Al–Mg–Si alloy
Sign Up to like & getrecommendations! Published in 2020 at "Materials Letters"
DOI: 10.1016/j.matlet.2020.128363
Abstract: Abstract The effect of the cooling rate on the precipitation during homogenization cooling in the Al-0.31 Mg-0.68Si wt.% alloy was investigated. Different cooling rates (furnace-cooling/air-cooling) were used in this work. For the samples cooled in furnace… read more here.
Keywords: homogenization cooling; effect cooling; rate precipitation; cooling rate ... See more keywords
Effect of cooling ways on properties of Al/Pb-0.2%Ag rolled alloy for zinc electrowinning
Sign Up to like & getrecommendations! Published in 2017 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(17)60235-8
Abstract: Abstract In order to study the new anode materials for zinc electrowinning, Al/Pb-0.2%Ag rolled alloy was produced by composite casting and hot rolling. Then the effect of cooling ways on properties of Al/Pb-0.2%Ag rolled alloy… read more here.
Keywords: alloy; effect cooling; zinc electrowinning; cooling ways ... See more keywords
The Effect of Cooling Rate on the Microstructure Evolution and Mechanical Properties of Ti-Microalloyed Steel Plates
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15041385
Abstract: Ti-bearing microalloyed steel plates with a thickness of 40 mm were subjected to ultra-fast cooling (UFC) and traditional accelerate cooling after hot-rolling, aiming to investigate the effect of cooling rate on the microstructure and mechanical… read more here.
Keywords: steel plates; microalloyed steel; effect cooling; mpa ... See more keywords
The Effect of Cooling Rate on Crystallographic Features of Phase Transformations in Zr-2.5Nb
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16103758
Abstract: Zirconium (Zr) alloys are utilized as structural components for the cores of nuclear reactors due to the excellent combination of their mechanical properties and corrosion resistance under intense neutron irradiation conditions in water. The characteristics… read more here.
Keywords: crystallographic features; cooling rate; features phase; effect cooling ... See more keywords
The Effect of Cooling Rates on Thermal, Crystallization, Mechanical and Barrier Properties of Rotational Molding Polyamide 11 as the Liner Material for High-Capacity High-Pressure Vessels
Sign Up to like & getrecommendations! Published in 2023 at "Molecules"
DOI: 10.3390/molecules28062425
Abstract: The rapid development of hydrogen fuel cells has been paralleled by increased demand for lightweight type IV hydrogen storage vessels with high hydrogen storage density, which raises the performance requirements of internal plastic liners. An… read more here.
Keywords: molding polyamide; barrier properties; rotational molding; effect cooling ... See more keywords