Effect of the microstructure of carbon xerogels by using CTAB as template on their electrochemical performance
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Sol-Gel Science and Technology"
DOI: 10.1007/s10971-017-4389-9
Abstract: Low-cost resorcinol formaldehyde xerogels were prepared by using resorcinol and formaldehyde as precursors, Na2CO3 as catalyst, and hexadecyltrimethy ammonium bromide as template through sol-gel process and ambient pressure drying without organic solvent replacement. The hexadecyltrimethy… read more here.
Keywords: microstructure carbon; carbon; carbon xerogels; effect microstructure ... See more keywords
Effect of Microstructure of X-120 Steel on CO2 Corrosion Inhibition by 2-Mercaptobenzimidazole
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04398-0
Abstract: The use of 2-mercaptobenzimidazole (2MBI) as corrosion inhibitor for API X-120 pipeline with two different microstructures in a CO2-saturated 3.5% NaCl solution has been investigated. One microstructure was predominantly martensitic and bainitic (steel A), whereas… read more here.
Keywords: 120 steel; corrosion; microstructure 120; effect microstructure ... See more keywords
Effect of microstructure and cutting speed on machining behavior of Ti6Al4V alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-017-0413-9
Abstract: Machining of aerospace and biomedical grade titanium alloys has always been a challenge because of their low conductivity and elastic modulus. Different machining methods and parameters have been adopted for high precision machining of titanium… read more here.
Keywords: titanium alloys; cutting speed; microstructure cutting; effect microstructure ... See more keywords
Effect of microstructure on the corrosion resistance of coatings by extreme high speed laser cladding
Sign Up to like & getrecommendations! Published in 2020 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2020.146085
Abstract: Abstract The corrosion resistance of 431 stainless coatings produced by a novel surface modification technology (EHLA) was analyzed. As the cladding speed increased, the dendrites became more refined and the composition distribution was more uniform.… read more here.
Keywords: cladding speed; corrosion resistance; corrosion; effect microstructure ... See more keywords
Effect of Ti on the microstructure change and oxidation behavior of Ni+CrAlYHfSiN composite coatings
Sign Up to like & getrecommendations! Published in 2019 at "Corrosion Science"
DOI: 10.1016/j.corsci.2019.01.023
Abstract: Abstract Two composite coatings are manufactured by reactive magnetron sputtering on superalloys. The effect of titanium on oxidation resistance and microstructural change of composite coatings were studied. Titanium in superalloys reacted with [N] ions in… read more here.
Keywords: oxidation; microstructure change; effect microstructure; composite coatings ... See more keywords
A 2-DOF model for incorporating the effect of microstructure on the coupled torsion/bending instability of nano-mirror in Casimir regime
Sign Up to like & getrecommendations! Published in 2017 at "Optik"
DOI: 10.1016/j.ijleo.2016.11.151
Abstract: Abstract It has been well-established that the physical performance of nano-devices might be affected by the microstructure. Herein, a 2 degree-of-freedom model based on modified couple stress elasticity is developed to incorporate the impact of… read more here.
Keywords: torsion; model; torsion bending; effect microstructure ... See more keywords
Effect of Zn on microstructure, texture and mechanical properties of Al-Mg-Si-Cu alloys with a medium number of Fe-rich phase particles
Sign Up to like & getrecommendations! Published in 2017 at "Materials Characterization"
DOI: 10.1016/j.matchar.2017.10.012
Abstract: Abstract The effect of Zn on the microstructure, texture evolution and mechanical properties of Al-Mg-Si-Cu alloys with a medium number of Fe-rich phase particles was investigated using tensile testing machine, optical microscopy (OM), scanning electron… read more here.
Keywords: texture; phase particles; effect microstructure; microstructure ... See more keywords
Preferred orientation of Bi and effect of Sn-Bi microstructure on mechanical and thermomechanical properties in eutectic Sn-Bi alloy
Sign Up to like & getrecommendations! Published in 2019 at "Materialia"
DOI: 10.1016/j.mtla.2019.100309
Abstract: Abstract The grain sizes and grain orientations of Sn and Bi phases in Sn-58Bi alloy are investigated. We find that the grain size of Bi is larger than that of Sn. Tensile test and two-dimensional… read more here.
Keywords: effect microstructure; preferred orientation; alloy; orientation effect ... See more keywords
Effect of Zr on microstructure and mechanical properties of binary TiAl alloys
Sign Up to like & getrecommendations! Published in 2018 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(18)64816-2
Abstract: Abstract Ti43Al and Ti47Al alloys with different contents of zirconium were prepared by non-consumable vacuum arc melting furnace. The microstructure and mechanical properties were investigated. The results showed that Zr had no obvious effect on… read more here.
Keywords: xzr; microstructure mechanical; ti47al; mechanical properties ... See more keywords
Effect of Zr on microstructure and mechanical properties of the Al–Cu–Er alloy
Sign Up to like & getrecommendations! Published in 2020 at "Materials Science and Technology"
DOI: 10.1080/02670836.2019.1709689
Abstract: ABSTRACT The microstructure and mechanical properties of the Al–4Cu–2.7Er–0.3Zr alloy were investigated. The precipitates of the L12 structured phase with sizes 37 ± 12 nm were formed in lines and homogenously distributed inside the aluminium matrix after annealing… read more here.
Keywords: properties alloy; effect microstructure; mechanical properties; microstructure mechanical ... See more keywords
Effect of Ni on Microstructure and Mechanical Property of a Co-Ti-V-Based Superalloy
Sign Up to like & getrecommendations! Published in 2021 at "Scanning"
DOI: 10.1155/2021/6678085
Abstract: The effect of Ni on microstructure, elemental partition behavior, γ′ phase solvus temperature, lattice misfit between γ and γ′ phases, and mechanical properties of the Co-8Ti-11V-xNi alloys was investigated. The result shows that the lattice… read more here.
Keywords: strength; phase; 10ni alloys; 8ti 11v ... See more keywords