Articles with "effect synthesis" as a keyword



Photo from wikipedia

The effect of synthesis and zirconium doping on the performance of nickel-rich NCM622 cathode materials for Li-ion batteries

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of Solid State Electrochemistry"

DOI: 10.1007/s10008-021-04933-x

Abstract: Among the cathode materials for advanced Li-ion batteries, nickel-rich Ni-Co-Mn (NCM) LiNixCoyMnyO2 (x > 0.5, x + 2y = 1) attracts great interest as promising materials owing to their high capacity, low cost, good cycling… read more here.

Keywords: cathode materials; effect; effect synthesis; ion batteries ... See more keywords
Photo from wikipedia

Effect of synthesis temperature on the structure and electrochemical performances of LiFePO4/C

Sign Up to like & get
recommendations!
Published in 2019 at "Ionics"

DOI: 10.1007/s11581-019-03145-8

Abstract: A LiFePO4/C material with different amounts of iron phosphides was synthesized by a sol–gel method with different calcination temperatures. XRD, HRTEM, SEM, FTIR, BET, Raman, and magnetic measurements were carried out to characterize the physical… read more here.

Keywords: temperature; effect synthesis; performance; synthesis temperature ... See more keywords
Photo from wikipedia

Effect of synthesis route on the electrochemical performance of CoMnFeO4 nanoparticles as a novel supercapacitor electrode material

Sign Up to like & get
recommendations!
Published in 2019 at "Applied Surface Science"

DOI: 10.1016/j.apsusc.2019.07.183

Abstract: Abstract In this study, CoMnFeO4 ternary metal oxide nanoparticles are prepared via hydrothermal and sol-gel ignition methods. Their structures are investigated and characterized by FT-IR, XRD, XPS, BET, SEM, EDX and HR-TEM analysis. Also, magnetic… read more here.

Keywords: sol gel; gel ignition; effect synthesis; supercapacitor ... See more keywords
Photo from wikipedia

Effect of synthesis conditions on room-temperature ferromagnetic properties of Mg-O nanoparticles

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2018.06.211

Abstract: Abstract Cubic, terraced, and spherical Mg-MgO nanoparticles (NPs), ranging in average particle size from 30 up to 80 nm, were prepared through vaporization and condensation of Mg metal in mix gas flow (argon + air) at conditions of… read more here.

Keywords: maximum magnetization; synthesis conditions; room temperature; effect synthesis ... See more keywords
Photo from archive.org

Biomorphic tubular nickel oxide structures: Effect of the synthesis parameters on their structural and functional properties, surface-related applications

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2019.152543

Abstract: Abstract A cheap, reproducible and facile method for synthesis of 1D high specific surface area biomorphic NiO crystalline microstructures by using natural fibers (cotton, hemp and flax) as templates, is reported. The effect of synthesis… read more here.

Keywords: functional properties; biomorphic tubular; structural functional; effect synthesis ... See more keywords
Photo from wikipedia

Pore geometry effect on the synthesis of silica supported perovskite oxides.

Sign Up to like & get
recommendations!
Published in 2017 at "Journal of colloid and interface science"

DOI: 10.1016/j.jcis.2017.05.107

Abstract: The formation of perovskite oxide nanoparticles supported on ordered mesoporous silica with different pore geometry is here presented. Systematic study was performed varying both pore shape (gyroidal, cylindrical, spherical) and size (7.5, 12, 17nm) of… read more here.

Keywords: pore geometry; synthesis silica; geometry effect; geometry ... See more keywords
Photo by fabiooulucas from unsplash

Effect of synthesis conditions on structural, morphological and luminescence properties of MgAl 2 O 4 :Eu 3+ nanopowders

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Luminescence"

DOI: 10.1016/j.jlumin.2017.10.068

Abstract: Abstract Nanocrystalline aluminium magnesium spinel doped with europium ions powders were synthesized via modified Pechini method. The effect of synthesis conditions (calcination temperature and duration) on structural, morphological and luminescence properties of obtained nanopowders was… read more here.

Keywords: synthesis conditions; calcination temperature; effect synthesis; luminescence ... See more keywords
Photo from wikipedia

Mechanochemical effect on synthesis and sintering behavior of MgAl2O4 spinel

Sign Up to like & get
recommendations!
Published in 2021 at "Materials Chemistry and Physics"

DOI: 10.1016/j.matchemphys.2021.124275

Abstract: Abstract This research work accomplishes the mechanochemical effect on synthesis and sintering behavior of MgAl2O4 spinel prepared by separate vibrating ball milling (VBM) and planetary micro-milling (PMM-P7) processes. The pure stoichiometric magnesium aluminate spinel (MgAl2O4)… read more here.

Keywords: sintering behavior; effect synthesis; mechanochemical effect; behavior mgal2o4 ... See more keywords
Photo from archive.org

Effect of the synthesis conditions on the properties of La0.15Sm0.35Sr0.08Ba0.42FeO3 − δ cathode material for SOFCs

Sign Up to like & get
recommendations!
Published in 2017 at "Powder Technology"

DOI: 10.1016/j.powtec.2017.09.020

Abstract: Ministerio de Economia, Industria y Competitividad (MAT2016-76739-R (AEI/FEDER, UE) and MAT2015-86078-R), and Departamento de Educacion of the Basque Government (IT-630-13) read more here.

Keywords: synthesis conditions; conditions properties; properties la0; 15sm0 35sr0 ... See more keywords

Effect of synthesis parameters on structural and mechanical properties of Ti 3 Al–Nb–Mo intermetallic compound obtained by powder metallurgy techniques

Sign Up to like & get
recommendations!
Published in 2017 at "Transactions of Nonferrous Metals Society of China"

DOI: 10.1016/s1003-6326(17)60059-1

Abstract: The influence of microstructure, heat treatment and alloying addition on mechanical and fracture properties of Ti3Al-based intermetallic at room and elevated temperatures was studied. Ti3Al–11Nb–1Mo (mole fraction, %) alloy was consolidated via powder metallurgy processing… read more here.

Keywords: powder metallurgy; synthesis parameters; metallurgy; effect synthesis ... See more keywords
Photo from academic.microsoft.com

Effect of synthesis pH on the structure and catalytic properties of FeMo catalysts

Sign Up to like & get
recommendations!
Published in 2019 at "RSC Advances"

DOI: 10.1039/c9ra07202k

Abstract: The effect of pH on polynuclear molybdenum species (isopolymolybdates) synthesis was investigated by Raman spectroscopy. read more here.

Keywords: effect; effect synthesis; synthesis structure; structure catalytic ... See more keywords