Effects of Li addition on the corrosion behaviour and biocompatibility of Mg(Li)–Zn–Ca metallic glasses
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science"
DOI: 10.1007/s10853-018-2323-3
Abstract: Magnesium alloys with suitable corrosion behaviour and good mechanical properties are desired for biodegradable materials. In the current study, novel Mg–Li-based metallic glasses (MGs) demonstrate potential clinical applications as implantable biodegradable materials. The amorphous structure… read more here.
Keywords: corrosion behaviour; biocompatibility; corrosion; effects addition ... See more keywords
Effects of Bi addition on solidification behavior of Mg–Al–Zn casting alloys using experiments and CALPHAD calculations
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Science"
DOI: 10.1007/s10853-020-04492-y
Abstract: A comprehensive understanding of solidification behavior of Mg–Al–Zn–Bi alloys is necessary for designing novel casting Bi-modified AZ alloys. In this paper, 21 Mg–Al–Zn–Bi alloys were prepared to investigate the phase constituents, morphologies, grain sizes and area… read more here.
Keywords: effects addition; microscopy; solidification behavior; solidification ... See more keywords
Effects of the Addition of Mg on the Microstructure and Mechanical Properties of Hypoeutectic Al–7%Si Alloy
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Metalcasting"
DOI: 10.1007/s40962-016-0131-6
Abstract: It is well known that the mechanical properties of hypoeutectic Al–Si alloys are influenced by the size, morphology and distribution of primary α-Al dendrites, eutectic Si crystals and other intermetallics. In the present work, the… read more here.
Keywords: addition; addition microstructure; properties hypoeutectic; effects addition ... See more keywords
Effects of Ti(C, N) addition on the microstructure and mechanical properties of spark plasma sintered Si3N4/Ti(C, N) ceramic tool material
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.08.003
Abstract: Abstract Si3N4/Ti(C, N) ceramic tool materials were investigated in this work. The effects of Ti(C, N) addition and sintering temperatures on the mechanical properties, phase transformation, and microstructures of Si3N4/Ti(C, N) ceramic tool materials were… read more here.
Keywords: addition; effects addition; mechanical properties; si3n4 ceramic ... See more keywords
Effects of CO and H2 addition on OH* chemiluminescence characteristics in laminar rich inverse diffusion flames
Sign Up to like & getrecommendations! Published in 2019 at "Fuel"
DOI: 10.1016/j.fuel.2019.05.137
Abstract: Abstract Optical diagnostic technique based on chemiluminescence emissions is a promising alternative flame monitoring method to indicate the combustion regime and related characteristic parameters. In this work, laminar rich inverse diffusion flames were numerically studied… read more here.
Keywords: effects addition; addition; chemiluminescence; diffusion ... See more keywords
Interstitial effects of B addition on the metamagnetic transition and magnetocaloric effect in tetragonal Cu2Sb-type Mn1.95Cu0.05Sb alloys
Sign Up to like & getrecommendations! Published in 2017 at "Intermetallics"
DOI: 10.1016/j.intermet.2017.06.010
Abstract: Abstract Mn 1.95 Cu 0.05 SbB x (x = 0, 0.06 and 0.1) alloys had been prepared and B interstitial effects on metamagnetic transition were studied. The metamagnetic transition temperature was reduced and thermal hysteresis was widened… read more here.
Keywords: transition; metamagnetic transition; effects addition; type ... See more keywords
Effects of Ag or Al addition to CuZr-based metallic alloys on glass formation and structural evolution: A molecular dynamics simulation study
Sign Up to like & getrecommendations! Published in 2021 at "Intermetallics"
DOI: 10.1016/j.intermet.2020.107023
Abstract: Abstract The local environment of Cu47.5Zr47.5M5 (M = Ag and Al) metallic liquids and glasses has been studied in detail using the embedded atom method combined with molecular dynamics simulations. The effects of the addition of Al… read more here.
Keywords: addition; molecular dynamics; glass; addition cuzr ... See more keywords
Effects of Ag addition on solid-state interfacial reactions between Sn-Ag-Cu solder and Cu substrate
Sign Up to like & getrecommendations! Published in 2017 at "Materials Characterization"
DOI: 10.1016/j.matchar.2017.01.004
Abstract: Abstract Low–Ag–content Sn–Ag–Cu (SAC) solders have attracted much recent attention in electronic packaging for their low cost. To reasonably reduce the Ag content in Pb–free solders, a deep understanding of the basic influence of Ag… read more here.
Keywords: solid state; addition solid; effects addition; growth ... See more keywords
Effects of Mg addition on the Al6(Fe,Mn) intermetallic compounds and the grain refinement of α-Al in Al-Fe-Mn alloys
Sign Up to like & getrecommendations! Published in 2020 at "Materials Characterization"
DOI: 10.1016/j.matchar.2020.110758
Abstract: Abstract The effects of Mg additions on the Fe-containing intermetallic compounds and the heterogeneous nucleation of α-Al were investigated in Al-1.4Fe-0.7Mn-xMg alloys using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The experimental results… read more here.
Keywords: addition; microscopy; intermetallic compounds; addition al6 ... See more keywords
Effects of Sn addition on microstructure and mechanical properties of Mg-Zn-Al alloys
Sign Up to like & getrecommendations! Published in 2017 at "Progress in Natural Science: Materials International"
DOI: 10.1016/j.pnsc.2017.11.002
Abstract: Abstract The effects of Sn addition (0, 0.5, 1.0, 2.0 and 3 wt%) on microstructure of Mg-4Zn-1.5Al alloy in cast and extruded states were investigated, and the mechanical properties of as-extruded Mg-4Zn-1.5Al-xSn studied. The experimental results… read more here.
Keywords: 4zn 5al; addition; addition microstructure; mechanical properties ... See more keywords
The Effects of the Addition of Dy, Nb, and Ga on Microstructure and Magnetic Properties of Nd2Fe14B/α-Fe Nanocomposite Permanent Magnetic Alloys
Sign Up to like & getrecommendations! Published in 2017 at "Microscopy and Microanalysis"
DOI: 10.1017/s1431927616012770
Abstract: Abstract We study the effects of Dy, Nb, and Ga additions on the microstructure and magnetic properties of Nd2Fe14B/α-Fe nanocomposites. Dy, Nb, and Ga additions inhibit the growth of the soft magnetic α-Fe phase. Dy… read more here.
Keywords: addition; magnetic properties; effects addition; microstructure magnetic ... See more keywords