Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-020-03103-5
Abstract: Al–12Si alloys for electronic packaging shell were prepared by spray forming followed by hot pressing and the effects of 0.5%Cu and 0.6%Mg alloying on the microstructure, thermo-physical, and mechanical properties were examined. The microstructural observations…
read more here.
Keywords:
12si alloy;
alloying microstructure;
alloy;
effects alloying ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2018 at "Corrosion Science"
DOI: 10.1016/j.corsci.2018.08.021
Abstract: Abstract The effects of alloying elements on corrosion of Ni-based alloys in NaCl-KCl-MgCl2 under Ar in the temperature range of 600∼800 °C were investigated by immersion test, SEM/EDS, EPMA and XRD techniques. A thermodynamic potential-pO2− diagram…
read more here.
Keywords:
nacl kcl;
effects alloying;
corrosion;
elements corrosion ... See more keywords
Sign Up to like & get
recommendations!
2
Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.03.290
Abstract: Abstract From first-principle calculations with the Local Density Approximation (LDA) and Generalized Gradient Approximation (GGA) approaches, the structural, elastic, electronic and thermodynamic properties of the PdTM and Pd 31 TM(TM = Ti, Zr, Hf) alloy have been…
read more here.
Keywords:
thermodynamic properties;
elements mechanical;
effects alloying;
young modulus ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2018 at "Journal of Membrane Science"
DOI: 10.1016/j.memsci.2017.12.078
Abstract: Abstract First principles calculations are performed to comparatively reveal the fundamental effects of Ag alloying on phase stability, hydrogen solubility, hydrogen diffusivity, and hydrogen permeability of body-centered-cubic (BCC) and face-centered-cubic (FCC) Pd 8 Cu 8…
read more here.
Keywords:
alloying hydrogen;
hydrogen;
effects alloying;
hydrogen behaviors ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2019 at "Materials Science and Technology"
DOI: 10.1080/02670836.2019.1625170
Abstract: ABSTRACT The objective of this study was to investigate the effects of alloying elements on mechanical and thermal characteristic of Al-6wt-%Si-0.4wt-%Mg–(Cu) foundry alloys after heat treatment using a universal testing machine and a laser flash…
read more here.
Keywords:
mechanical thermal;
effects alloying;
elements mechanical;
6wt 4wt ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of Materials Research"
DOI: 10.1557/jmr.2020.277
Abstract:
read more here.
Keywords:
alloying element;
effects alloying;
element stacking;
stacking fault ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2023 at "Materiali in Tehnologije"
DOI: 10.17222/mit.2023.833
Abstract: The main purpose of this study is to investigate the corrosion behavior of nickel-aluminum buffer and tungsten-carbide-based ceramic-metal composite coated materials on EN 1.4404 quality stainless steels in a sulfuric acid (H2SO4) environment for petrochemical…
read more here.
Keywords:
behavior hvof;
corrosion behavior;
surface;
effects alloying ... See more keywords