Effects of Nb on the Microstructure and Properties of Ti-Added Hypereutectic High-Cr Cast Iron
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3516-2
Abstract: Effects of Nb on the microstructure and properties of Ti-added hypereutectic high-Cr cast iron were studied. With the addition of Nb, a new phase (Nb,Ti)C was formed. The microstructure analysis revealed that the amount of… read more here.
Keywords: added hypereutectic; hypereutectic high; microstructure properties; effects microstructure ... See more keywords
Hot Rolling Effects on the Microstructure and Chemical Properties of NiTiTa Alloys
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04473-6
Abstract: In the present paper, a Ni-37Ti-15Ta (wt.%) shape memory alloy was analyzed in as-cast and hot-rolled conditions, by differential scanning calorimetry, scanning electron microscopy coupled with energy-dispersive spectroscopy, x-ray diffraction and electrochemical tests into a… read more here.
Keywords: microstructure chemical; rolling effects; chemical properties; hot rolling ... See more keywords
Effects of Si on the Microstructure and Work Hardening Behavior of Fe‒17Mn‒1.1C‒xSi High Manganese Steels
Sign Up to like & getrecommendations! Published in 2020 at "Metals and Materials International"
DOI: 10.1007/s12540-020-00846-y
Abstract: In order to improve the work hardening capacity under low stresses and the yield strength of conventional Hadfield steels, the effects of Si on the microstructure and work hardening behavior of the Fe‒17Mn‒1.1C‒xSi steels under… read more here.
Keywords: hardening behavior; work; microstructure work; behavior 17mn ... See more keywords
Ultrasonication Effects on the Microstructure Characteristics of the A380 Die Cast Alloy
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Metalcasting"
DOI: 10.1007/s40962-018-00296-8
Abstract: This investigation is an attempt to optimize the ultrasonic treatment (UST) temperature to refine the microstructure of A380 diecastings. As a preliminary estimation, isothermal UST was performed at the liquidus temperature, slightly above and at… read more here.
Keywords: alloy; temperature; grain refined; ultrasonication effects ... See more keywords
Effects of microstructure on crack resistance and low-temperature toughness of ultra-low carbon high strength steel
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Plasticity"
DOI: 10.1016/j.ijplas.2019.01.004
Abstract: Abstract The effects of microstructure on crack resistance and toughening mechanism of an ultra-low carbon steel were investigated. The microstructures were controlled via thermal-mechanical control processing (TMCP) and heat-treatments. Distribution of stress concentration, microcracks formation… read more here.
Keywords: effects microstructure; steel; martensitic structure; structure ... See more keywords
Synergistic effects of Ce and Mg on the microstructure and tensile properties of Al-7Si-0.3Mg-0.2Fe alloy
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.05.049
Abstract: Abstract The effects of Ce and/or Mg on the microstructure and tensile properties of Al-Si-Mg-Fe alloys have been systematically investigated. Results showed that the separate addition of Mg or Ce could cause grain and eutectic… read more here.
Keywords: effects microstructure; combined addition; tensile properties; microstructure tensile ... See more keywords
Effects of microstructure transformation on mechanical properties, corrosion behaviors of Mg-Zn-Mn-Ca alloys in simulated body fluid.
Sign Up to like & getrecommendations! Published in 2018 at "Journal of the mechanical behavior of biomedical materials"
DOI: 10.1016/j.jmbbm.2018.01.028
Abstract: Magnesium and its alloys have unique advantages to act as resorbable bone fixation materials, due to their moderate mechanical properties and biocompatibility, which are similar to those of human tissue. However, early resorption and insufficient… read more here.
Keywords: microstructure transformation; corrosion; mechanical properties; effects microstructure ... See more keywords
Effects of Sr, Ce and P on the microstructure and mechanical properties of rapidly solidified Al7Si alloys
Sign Up to like & getrecommendations! Published in 2018 at "Materials Characterization"
DOI: 10.1016/j.matchar.2018.04.018
Abstract: Abstract A series of Al 7Si based alloys with trace addition of Sr, Ce or P were prepared using melt-spinning at two different high cooling rates, and the microstructure as well as the hardness of… read more here.
Keywords: high cooling; properties rapidly; microstructure mechanical; mechanical properties ... See more keywords
Modelling the effects of microstructure, properties and abrasion conditions on the wear resistance of SS316L-Al2O3 composites
Sign Up to like & getrecommendations! Published in 2017 at "Tribology International"
DOI: 10.1016/j.triboint.2017.02.041
Abstract: Abstract The wear of materials is defined by multiple factors including the microstructure, mechanical properties and wear conditions. Therefore, starting from earlier models linking the hardness and toughness to the wear resistance, a new wear… read more here.
Keywords: wear resistance; modelling effects; resistance; effects microstructure ... See more keywords
Effects of microstructure and growth conditions on quantum emitters in gallium nitride
Sign Up to like & getrecommendations! Published in 2019 at "APL Materials"
DOI: 10.1063/1.5098794
Abstract: Single-photon emitters in gallium nitride (GaN) are gaining interest as attractive quantum systems due to the well-established techniques for growth and nanofabrication of the host material, as well as its remarkable chemical stability and optoelectronic… read more here.
Keywords: growth conditions; quantum emitters; gallium nitride; effects microstructure ... See more keywords