Dynamic Electric Discharge Paths in Liquid Metal Marble Arrays
Sign Up to like & getrecommendations! Published in 2024 at "Advanced Materials"
DOI: 10.1002/adma.202408933
Abstract: Electric discharge occurs ubiquitously in both natural and engineered systems, where the discharge paths provide critical information. However, control and visualization of discharge patterns is a challenging task. Here arrays of liquid metal marbles, droplets… read more here.
Keywords: liquid metal; electric discharge; discharge; marble arrays ... See more keywords
Synthesis of TiC reinforced Ti matrix composites by spark plasma sintering and electric discharge sintering: A comparative assessment of microstructural and mechanical properties
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.01.062
Abstract: Abstract Ti-TiC composite materials were produced by spark plasma sintering (SPS) and electric discharge sintering (EDS) of spherical Ti powders with surface-embedded TiC. Hardness (HIT) and reduced elastic modulus (Er) were estimated using the nanoindentation… read more here.
Keywords: electric discharge; plasma sintering; discharge sintering; spark plasma ... See more keywords
Application of optical spectroscopy for investigation of synthesis of hydrogen and nanoparticles in electric discharge in liquid-phase media
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2020.09.176
Abstract: Abstract In this work, a low-temperature plasma initiated in liquid media between electrodes has been shown to be able to decompose hydrogen containing organic molecules resulting in obtaining gaseous products with volume part of hydrogen… read more here.
Keywords: hydrogen; liquid phase; optical spectroscopy; electric discharge ... See more keywords
A modified electrode design for improving process performance of electric discharge drilling
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2018.09.014
Abstract: Abstract The present experimental investigation aims at improvement of the response characteristics during electric discharge drilling process. It is a well-established fact that aspect ratio of a drilled hole in Electric Discharge Drilling (EDD) process… read more here.
Keywords: electric discharge; time; electrode; process ... See more keywords
Micro-mechanical characterization of superficial layer synthesized by electric discharge machining process
Sign Up to like & getrecommendations! Published in 2021 at "Materials Letters"
DOI: 10.1016/j.matlet.2021.130769
Abstract: Abstract The present research work aims to investigate the micro-mechanical behaviour of the superficial layer synthesized on Ti64 alloy by the electric discharge machining process. The top surface, cross-section morphology, and elemental composition of the… read more here.
Keywords: electric discharge; micro mechanical; layer synthesized; superficial layer ... See more keywords
Measurement and analysis of molybdenum wire erosion and deformation during wire electric discharge machining of Ti-6Al-4V alloy
Sign Up to like & getrecommendations! Published in 2021 at "Measurement"
DOI: 10.1016/j.measurement.2021.109440
Abstract: Abstract With growing demands of manufacturing sector, wire erosion and breakage act as major challenges during wire electric discharge machining (WEDM) process. This paper reports an experimental investigation on the measurement and analysis of molybdenum… read more here.
Keywords: electric discharge; wire electric; erosion; wire erosion ... See more keywords
Fatigue life and Fracture Morphology of Inconel 718 machined by spark EDM process
Sign Up to like & getrecommendations! Published in 2019 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2019.02.042
Abstract: Abstract Fatigue life of electric discharge machined and end milled samples of Inconel 718 alloy at high cycle fatigue mode was investigated. The objective of this work is to determine the influence of recast layer… read more here.
Keywords: electric discharge; machined spark; life; fracture morphology ... See more keywords
Application of non-ionic liquids-based modified dielectrics during electric discharge machining (EDM) of Ti6Al4V alloy to enhance machining efficiency and process optimization
Sign Up to like & getrecommendations! Published in 2024 at "Scientific Reports"
DOI: 10.1038/s41598-024-71447-7
Abstract: The non-conventional manufacturing technologies are notorious when it comes to productivity and processing time in production-related industries. However, the aerospace and other high-end sectors enjoy another quality matrix of these processes and compromise on the… read more here.
Keywords: process; machining edm; electric discharge; modified dielectrics ... See more keywords
Sustainability metrics targeted optimization and electric discharge process modelling by neural networks
Sign Up to like & getrecommendations! Published in 2025 at "Scientific Reports"
DOI: 10.1038/s41598-024-78883-5
Abstract: Aluminium and its alloys, especially Al6061, have gathered significant interest among researchers due to its less density, great durability, and high strength. Due to their lightweight properties, the precise machining of these alloys can become… read more here.
Keywords: metrics targeted; machining; electric discharge; sustainability metrics ... See more keywords
Parametric optimization of multiwalled carbon nanotube-assisted electric discharge machining of Al-10%SiCp metal matrix composite by response surface methodology
Sign Up to like & getrecommendations! Published in 2017 at "Materials and Manufacturing Processes"
DOI: 10.1080/10426914.2016.1140196
Abstract: ABSTRACT The demand for miniaturized products having a glossy surface or nano-level surface is increasing exponentially in automobile, aerospace, biomedical, and semiconductor industries. The mirror-like surface finish has generated a need to develop advanced machining… read more here.
Keywords: methodology; sicp metal; surface; electric discharge ... See more keywords
Experimental investigation on performance of additive mixed dielectric during micro-electric discharge drilling on 316L stainless steel
Sign Up to like & getrecommendations! Published in 2017 at "Materials and Manufacturing Processes"
DOI: 10.1080/10426914.2016.1221107
Abstract: ABSTRACT This study investigates the impact of machining factors on the performance of additive mixed micro-electric discharge drilling of 316L stainless steel. The effects of three kinds of powder, powder concentration, voltage, capacitance, feed rate,… read more here.
Keywords: performance additive; micro electric; electric discharge; additive mixed ... See more keywords