Evolutions of the Micro- and Macrostructure and Tensile Property of Cu-15Ni-8Sn Alloy During Electromagnetic Stirring-Assisted Horizontal Continuous Casting
Sign Up to like & getrecommendations! Published in 2019 at "Metallurgical and Materials Transactions B"
DOI: 10.1007/s11663-019-01664-3
Abstract: The present study investigates the evolution of the micro- and macrostructure and tensile property of the Cu-15Ni-8Sn (weight percent) alloy prepared by horizontal continuous casting and electromagnetic stirring (EMS). The results show that the application… read more here.
Keywords: electromagnetic stirring; micro macrostructure; tensile property; property 15ni ... See more keywords
Comparison of Si Refinement Efficiency of Electromagnetic Stirring and Ultrasonic Treatment for a Hypereutectic Al-Si Alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2602-1
Abstract: The effects of electromagnetic stirring, ultrasonic treatment (UT), and their combination on the Si particles refinement in a hypereutectic Al-Si alloy (A390) were examined. All three physical methods yielded a considerable change in the shape… read more here.
Keywords: ultrasonic treatment; hypereutectic alloy; electromagnetic stirring; stirring ultrasonic ... See more keywords
Investigating the micro-structures of A356 semi-solids based on electromagnetic stirring currents and crucible materials
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-020-0831-y
Abstract: In this study, the characteristics of microstructures in a liquid state were investigated; these microstructures were produced via electromagnetic stirring using semisolid forming methods. The spherical structures were studied under the application of variable currents… read more here.
Keywords: semi solids; electromagnetic stirring; structures a356; investigating micro ... See more keywords
The effects of annular electromagnetic stirring parameters on microstructure evolution of rheocast AZ91 magnesium alloy
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Research and Technology"
DOI: 10.1016/j.jmrt.2019.03.009
Abstract: Abstract In the present study, an annular electromagnetic stirrer was used to fabricate the semi-solid slurry of AZ91 magnesium alloy under various conditions of electromagnetic intensities and times. The fabricated semi-solid slurry was injected into… read more here.
Keywords: microstructure evolution; az91 magnesium; annular electromagnetic; magnesium alloy ... See more keywords
Effects of AlB2/AlP phase and electromagnetic stirring on impurity B/P removal in the solidification process of Al-30Si alloy
Sign Up to like & getrecommendations! Published in 2018 at "Separation and Purification Technology"
DOI: 10.1016/j.seppur.2018.06.052
Abstract: Abstract To enhance the understanding of impurities B and P removal in the solidification purification process of the Al-30Si alloy, series of experiments were carried out to study the roles of AlB2 and AlP in… read more here.
Keywords: process 30si; electromagnetic stirring; alb2 alp; removal solidification ... See more keywords
Effects of vertical electromagnetic stirring on grain refinement and macrosegregation control of bearing steel billet in continuous casting
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Iron and Steel Research International"
DOI: 10.1016/s1006-706x(17)30073-0
Abstract: The grain refinement and macrosegregation control of GCr15 bearing steel were investigated under a type of rarely-used electromagnetic stirring, vertical electromagnetic stirring (V-EMS), in continuous casting. V-EMS can create an upward electromagnetic force and generate… read more here.
Keywords: electromagnetic stirring; macrosegregation control; steel; refinement macrosegregation ... See more keywords
Microstructure and mechanical properties of SiCp/ZL105 composite prepared by electromagnetic stirring
Sign Up to like & getrecommendations! Published in 2018 at "Advances in Mechanical Engineering"
DOI: 10.1177/1687814018821004
Abstract: Aluminum matrix composites reinforced with SiC particles (SiCp) were prepared by electromagnetic stirring. This article aims to study the effects of SiCp addition on microstructure and mechanical properties of SiCp/ZL105, finally leading to expended range… read more here.
Keywords: electromagnetic stirring; properties sicp; microstructure mechanical; prepared electromagnetic ... See more keywords
Comparison of Water-Removal Efficiency of Molecular Sieves Vibrating by Rotary Shaking and Electromagnetic Stirring from Feedstock Oil for Biofuel Production
Sign Up to like & getrecommendations! Published in 2021 at "Fermentation"
DOI: 10.3390/fermentation7030132
Abstract: Adequate water-removal techniques are requisite to remain superior biofuel quality. The effects of vibrating types and operating time on the water-removal efficiency of molecular sieves were experimentally studied. Molecular sieves of 3 Å pore size… read more here.
Keywords: electromagnetic stirring; water; removal efficiency; water removal ... See more keywords
The δ Phase Precipitation of an Inconel 718 Superalloy Fabricated by Electromagnetic Stirring Assisted Laser Solid Forming
Sign Up to like & getrecommendations! Published in 2019 at "Materials"
DOI: 10.3390/ma12162604
Abstract: Fabricating an Inconel 718 superalloy using electromagnetic stirring assisted laser solid forming (EMS-LSF) is a novel method to modify its microstructure and mechanical properties by consuming the Nb element in the γ phase to alleviate… read more here.
Keywords: phase; electromagnetic stirring; inconel 718; solid forming ... See more keywords
Microstructures and Macrosegregation of Al–Zn–Mg–Cu Alloy Billet Prepared by Uniform Direct Chill Casting
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14040708
Abstract: In this study, large-sized Al–Zn–Mg–Cu alloy billets were prepared by direct chill casting imposed with annular electromagnetic stirring and intercooling; a process named uniform direct chill casting. The effects of uniform direct chill casting on… read more here.
Keywords: direct chill; electromagnetic stirring; microstructures macrosegregation; chill casting ... See more keywords
Effects of Intercooling Intensity on Temperature Field and Microstructure of Large-Scale 2219 Al Alloy Billet Prepared by Internal Electromagnetic Stirring Casting
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15051809
Abstract: Internal electromagnetic stirring is an advanced melt treatment method, which can be used in direct chill casting to prepare large-scale Al alloy billets. Intercooling intensity is a primary parameter of internal electromagnetic stirring; its effects… read more here.
Keywords: electromagnetic stirring; large scale; intercooling intensity; alloy ... See more keywords