A thermo‐stable poly(propylene carbonate)‐based composite separator for lithium‐sulfur batteries under elevated temperatures
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Energy Research"
DOI: 10.1002/er.5651
Abstract: Lithium‐sulfur (Li‐S) batteries have a great potential for the future development of energy industry. However, the high‐temperature performance of Li‐S batteries is still facing great challenge due to the high flammability of the electrolyte, sulfur… read more here.
Keywords: separator; batteries elevated; sulfur; composite separator ... See more keywords
Sandwiched Polymer Nanocomposites Reinforced by Two-Dimensional Interface Nanocoating for Ultrahigh Energy Storage Performance at Elevated Temperatures.
Sign Up to like & getrecommendations! Published in 2023 at "Small"
DOI: 10.1002/smll.202208105
Abstract: Polymer-based dielectrics are essential components in electrical and power electronic systems for high power density storage and conversion. A mounting challenge for polymer dielectrics is how to maintain their electrical insulation at not only high… read more here.
Keywords: two dimensional; elevated temperatures; polymer; ultrahigh energy ... See more keywords
Evaluation of the mechanical properties of high-strength cement paste at elevated temperatures using metakaolin
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Thermal Analysis and Calorimetry"
DOI: 10.1007/s10973-020-09992-2
Abstract: This paper presents a wide experimental study, in which it evaluates the performance of high-strength paste exposed to elevated temperatures up to 900 °C. Several factors have been investigated at the age of 90 days, i.e. metakaolin… read more here.
Keywords: strength; high strength; cement paste; mechanical properties ... See more keywords
Nanowear Mechanisms of Mg Alloyed with Al and Y at Elevated Temperatures
Sign Up to like & getrecommendations! Published in 2020 at "Tribology Letters"
DOI: 10.1007/s11249-020-01288-8
Abstract: We examine the role of important alloying elements (Al, Y), on friction and wear mechanisms of Mg as a function of temperature. Friction and wear tests of Mg–5%Al and Mg–5%Y alloys performed at room temperature,… read more here.
Keywords: nanowear mechanisms; temperature; alloyed elevated; friction ... See more keywords
Calculation of Thermal Fields of Cracked Concrete at Elevated Temperatures
Sign Up to like & getrecommendations! Published in 2020 at "KSCE Journal of Civil Engineering"
DOI: 10.1007/s12205-020-2057-z
Abstract: This paper analyzes the effects of cracking on the thermal field of concrete at elevated temperatures. In four concrete specimens with pre-made cracks, fire tests were performed. Then finite element analysis and theoretical analysis were… read more here.
Keywords: cracked concrete; calculation thermal; thermal fields; concrete elevated ... See more keywords
Effect of Processing Routes on Orientation-Dependent Tensile Flow Behavior of Zircaloy-4 at Elevated Temperatures
Sign Up to like & getrecommendations! Published in 2019 at "Metallography, Microstructure, and Analysis"
DOI: 10.1007/s13632-019-00544-1
Abstract: AbstractThe present work describes the correlation between orientation-dependent tensile flow behavior and texture of Zircaloy-4 sheet at elevated temperatures. The sheets are manufactured from three different routes, namely slab route, tube route, and pilgering. The… read more here.
Keywords: tensile flow; flow behavior; orientation dependent; elevated temperatures ... See more keywords
The Unfolded State of the C-Terminal Domain of L9 Expands at Low but Not at Elevated Temperatures.
Sign Up to like & getrecommendations! Published in 2018 at "Biophysical journal"
DOI: 10.1016/j.bpj.2018.07.013
Abstract: The temperature dependence of the overall dimensions of the denatured state ensemble (DSE) of proteins remains unclear. Some studies indicate compaction of the DSE at high temperatures, whereas others argue that dimensions do not decrease.… read more here.
Keywords: state; terminal domain; temperature; unfolded state ... See more keywords
Operando X-ray diffraction during battery cycling at elevated temperatures: A quantitative analysis of lithium-graphite intercalation compounds
Sign Up to like & getrecommendations! Published in 2017 at "Carbon"
DOI: 10.1016/j.carbon.2017.02.002
Abstract: Abstract The application of in situ or operando characterization techniques is highly important to gain a deeper understanding of the electrochemical and degradation processes that occur during battery cycling. This work presents the first results… read more here.
Keywords: operando ray; ray diffraction; battery cycling; cycling ... See more keywords
Modelling of transport processes in concrete exposed to elevated temperatures – An alternative formulation for sorption isotherms
Sign Up to like & getrecommendations! Published in 2018 at "Cement and Concrete Research"
DOI: 10.1016/j.cemconres.2018.01.012
Abstract: Abstract There is a significant need to understand, analyse and assess moisture transport in cementitious materials exposed to elevated temperatures in order to confidently predict the behaviour and ultimately the development of damage in safety… read more here.
Keywords: transport; formulation; sorption isotherms; exposed elevated ... See more keywords
Investigations on the compressive behavior of 3D random fibrous materials at elevated temperatures
Sign Up to like & getrecommendations! Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.01.044
Abstract: Abstract By means of the experimental method, micromechanical model and Finite Element Method (FEM), this paper studied the compressive behaviors of the three-dimensional random fibrous (3D RF) material in the through-the-thickness (TTT) and in-plane (IP)… read more here.
Keywords: random fibrous; investigations compressive; model; fem model ... See more keywords
Mechanical properties of two types of Al2O3/TiC ceramic cutting tool material at room and elevated temperatures
Sign Up to like & getrecommendations! Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.07.110
Abstract: Abstract Two types of hot pressed ceramic cutting tool material Al 2 O 3 /TiC μ and Al 2 O 3 /TiC μ /TiC n were studied in this paper. The mechanical properties of the… read more here.
Keywords: ceramic cutting; mechanical properties; two types; room ... See more keywords