Vertically Aligned Al2O3 Fiber Framework Leading to Anisotropically Enhanced Thermal Conductivity of Epoxy Composites
Sign Up to like & getrecommendations! Published in 2021 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202100327
Abstract: With the development of the modern electronic devices, efficient heat removal via thermal management materials in a low filling load has become one of the most critical challenges. Herein, a biomass template method is used… read more here.
Keywords: conductivity; thermal conductivity; anisotropically enhanced; enhanced thermal ... See more keywords
In Situ Nanoparticle Embedding for Authentication of Epoxy Composites.
Sign Up to like & getrecommendations! Published in 2018 at "Advanced materials"
DOI: 10.1002/adma.201801523
Abstract: In situ reduction of chloroauric acid inside an amine-cured epoxy matrix leads to formation of gold nanoparticles which are embedded inside the part. This phenomenon is leveraged to design an authentication system for composites wherein… read more here.
Keywords: authentication; authentication epoxy; situ nanoparticle; epoxy composites ... See more keywords
Improving the Curing and Mechanical Properties of Short Carbon Fibers/Epoxy Composites by Grafting Nano ZIF‐8 on Fibers
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Materials Interfaces"
DOI: 10.1002/admi.201901490
Abstract: The nano metal–organic framework particles (nano ZIF‐8) are grafted onto the surface of short carbon fibers (SCFs) by a facile in situ growth method in order to functionalize SCFs. The morphology, crystal structure, and chemical… read more here.
Keywords: short carbon; zif; carbon fibers; nano zif ... See more keywords
Enhancement in Mechanical, Thermal, and Dielectric Properties of Functionalized Graphene Oxide Reinforced Epoxy Composites
Sign Up to like & getrecommendations! Published in 2018 at "Advances in Polymer Technology"
DOI: 10.1002/adv.21702
Abstract: The present work has the objective of fabricating graphene oxide (GO) and amine-functionalized graphene oxide (F-GO) reinforced epoxy composites using the casting method. Epoxy resin was dispersed separately with GO (0.5 wt%) and F-GO (0.5… read more here.
Keywords: graphene oxide; mechanical thermal; functionalized graphene; oxide reinforced ... See more keywords
Influence of Soluble Electrospun Co‐Polyethersulfone Veils on Dynamic Mechanical and Morphological Properties of Epoxy Composites: Effect of Polymer Molar Mass
Sign Up to like & getrecommendations! Published in 2018 at "Advances in Polymer Technology"
DOI: 10.1002/adv.21723
Abstract: Electrospun veils from copolyethersulfones (coPES) with a number-average molar mass (Mn) of 9000 g/mol (coPES9k) and 20,000 g/mol (coPES20k) were prepared as soluble interlaminar veils for carbon fiber/epoxy composites. Dry carbon fabrics were covered with… read more here.
Keywords: unreinforced samples; veils showed; electrospun; molar mass ... See more keywords
Alumina–Silica Hybrid Reinforcement in Jute/Epoxy Composites: Mechanical Characterization and Modified Rule of Mixtures for Strength–Toughness–Hardness Optimization
Sign Up to like & getrecommendations! Published in 2025 at "Asia-Pacific Journal of Chemical Engineering"
DOI: 10.1002/apj.70151
Abstract: Natural fiber composites offer sustainable alternatives to synthetic materials but need performance enhancement for structural applications. This study investigates the mechanical behavior of jute fiber–reinforced epoxy composites modified with alumina–silica hybrid fillers at varying compositions… read more here.
Keywords: epoxy composites; filler; jute; silica hybrid ... See more keywords
Graphene nanosheets‐filled epoxy composites prepared by a fast dispersion method
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.45152
Abstract: Graphene nanosheets filled epoxy composites (GNS/Epoxy) were prepared at different filler loading levels from 0.25 to 3.00 wt %. A fast dispersion method as short as 5 min is employed to disperse GNS in epoxy… read more here.
Keywords: dispersion; nanosheets filled; filled epoxy; fast dispersion ... See more keywords
Enhancement of interlaminar fracture toughness of carbon fiber–epoxy composites using polyamide‐6,6 electrospun nanofibers
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.45244
Abstract: In this study, carbon fiber–epoxy composites are interleaved with electrospun polyamide-6,6 (PA 66) nanofibers to improve their Mode-I fracture toughness. These nanofibers are directly deposited onto carbon fabrics before composite manufacturing via vacuum infusion. Three-point… read more here.
Keywords: electrospun nanofibers; carbon fiber; carbon; fiber epoxy ... See more keywords
Mechanical, thermal, and hydrophobic properties of silica aerogel–epoxy composites
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.45706
Abstract: Epoxy composites were prepared with different contents of hydrophobic silica aerogel particles to investigate their mechanical, thermal, and hydrophobic properties. The composites, particularly the one containing 1 wt % silica aerogel, showed remarkable toughness and… read more here.
Keywords: epoxy composites; mechanical thermal; hydrophobic properties; silica aerogel ... See more keywords
Controllable design of nanostructure in block copolymer reinforced epoxy composites
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.46362
Abstract: The modification of epoxy composites through the construction of nanostructures via the self-organization of block copolymers in epoxy has become a hot topic. In this research, polystyrene-b-poly(ɛ-caprolactone)-b-polydimethylsiloxane-b-poly(ɛ-caprolactone)-b-polystyrene (PS-PCL-PDMS-PCL-PS) block copolymers with different lengths of PS… read more here.
Keywords: block; nanostructure block; controllable design; block copolymers ... See more keywords
Effect of Amino and Glycidyl‐Based Coupling Agent on the Tensile and Adhesion of Hyperbranched Polymer/Silica/Epoxy Composites
Sign Up to like & getrecommendations! Published in 2025 at "Polymers for Advanced Technologies"
DOI: 10.1002/pat.70131
Abstract: The cohesion of solder mask (SM) and adhesion between SM and copper pads are essential, especially for SM‐defined solder pads. In this study, the effect of the addition and loading (3, 5, 10 wt%) of silane… read more here.
Keywords: effect; silica; adhesion; tensile adhesion ... See more keywords