Morphology of Intermetallics Tailoring Tensile Properties and Quality Index of a Eutectic Al–Si–Ni Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202000503
Abstract: Herein, the eutectic Al–11 wt% Si–5 wt% Ni alloy, directionally solidified under transient heat‐flow conditions, is comparatively evaluated in relation to the binary Al–11 wt% Si and Al–5 wt% Ni alloys. Correlations are developed relating the solidification cooling rate,… read more here.
Keywords: quality index; eutectic alloy; tensile properties;
Multistep Crystallization and Melting Pathways in the Free‐Energy Landscape of a Au–Si Eutectic Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Science"
DOI: 10.1002/advs.201903544
Abstract: Abstract Crystals do eventually melt if they are heated to their characteristic melting point. However, this is practically only the case for high‐temperature stable crystals, whereas low‐temperature metastable crystals generally transform, before melting, into a… read more here.
Keywords: temperature; energy; crystallization; eutectic alloy ... See more keywords
Copper effects in mechanical, thermal and electrical properties of rapidly solidified eutectic Sn–Ag alloy
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-8906-6
Abstract: The Sn–3.5 wt%Ag alloy considered as a good alternative to Pb–Sn alloys. This study aims to investigate the effects of Cu or Sb additions by 3 or 5 wt% to melt-spun Sn–3.5%Ag alloy. Ternary melt-spun Sn–Ag–Cu and… read more here.
Keywords: mechanical thermal; alloy; thermal electrical; melt spun ... See more keywords
Influence of Growth Rate on Eutectic Spacing, Microhardness, and Ultimate Tensile Strength in the Directionally Solidified Al-Cu-Ni Eutectic Alloy
Sign Up to like & getrecommendations! Published in 2018 at "Metallurgical and Materials Transactions B"
DOI: 10.1007/s11663-018-1404-7
Abstract: In this work, the mechanical properties of the Al-Cu-Ni eutectic alloy, Al-32.5 wt pct Cu-1 wt pct Ni, were investigated in terms of the dependency on growth rates. The Al-Cu-Ni eutectic alloy was directionally solidified at a… read more here.
Keywords: directionally solidified; alloy; eutectic spacing; eutectic alloy ... See more keywords
Fabrication of the lamellar NiAl nanochannel by selective phase dissolution of NiAl–Cr(Mo) eutectic alloy
Sign Up to like & getrecommendations! Published in 2018 at "Corrosion Science"
DOI: 10.1016/j.corsci.2018.04.008
Abstract: Abstract A novel lamellar NiAl nanochannel with NiAl lamellae and nanochannels was fabricated from directionally solidified NiAl–Cr(Mo) eutectic alloy by selective phase dissolution. The optimum potential for the selective dissolution was at 1.14 VSHE. Results… read more here.
Keywords: nial nanochannel; selective phase; eutectic alloy; lamellar nial ... See more keywords
Micro-alloying effects of yttrium on the microstructure and strength of silicon carbide joint brazed with chromium-silicon eutectic alloy
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.12.137
Abstract: Abstract With the purpose of increasing the joint strength by refining the grain size of CrSi2 and increasing the fraction of Si-CrSi2 eutectic, the authors studied the effect of yttrium (Y) on the microstructure and… read more here.
Keywords: eutectic alloy; strength; yttrium microstructure; silicon ... See more keywords
Mg-Mg2X (X=Cu, Sn) eutectic alloy for the Mg2X nano-lamellar compounds to catalyze hydrolysis reaction for H2 generation and the recycling of pure X metals from the reaction wastes
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.09.154
Abstract: Abstract The hydrogen generating characteristics of typical Mg-Mg2X (Cu, Sn) eutectic alloys in the hydrolysis of seawater were investigated. Cu and Sn are cheaper than Nd, Ni, Co, and rare earth elements, and these were… read more here.
Keywords: mg2x eutectic; reaction; eutectic alloy; hydrolysis reaction ... See more keywords
Super-gravity field assisted homogeneous distribution of sub-micron eutectic Si in Al–Si alloy
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.152701
Abstract: Abstract We reported an investigation of super-gravity field assisted homogenization and refinement of eutectic Si in Al–Si alloy. Our results indicated that the super-gravity could intensify the convection and greatly promote the refining effect of… read more here.
Keywords: super gravity; eutectic alloy; field assisted; gravity ... See more keywords
Zn-Sn Interdigitated Eutectic Alloy Anodes with High Volumetric Capacity for Lithium-Ion Batteries
Sign Up to like & getrecommendations! Published in 2019 at "Joule"
DOI: 10.1016/j.joule.2019.01.005
Abstract: Summary Zn-Sn interdigitated eutectic alloy (IdEA) foils are highly promising anodes for lithium-ion batteries. Synthesized via severe plastic deformation, a two-phase alloy is converted into a nanostructured foil composed of tin domains distributed throughout an… read more here.
Keywords: interdigitated eutectic; alloy; capacity; eutectic alloy ... See more keywords
Electro growth of Al Cu eutectic alloy
Sign Up to like & getrecommendations! Published in 2020 at "Materials Characterization"
DOI: 10.1016/j.matchar.2020.110157
Abstract: Abstract The effects of directions and magnitudes of static electrical field on solidification of Al 33 wt.%Cu eutectic alloy were investigated. For this purpose, a new directional solidification apparatus was specially designed to solidify the Al… read more here.
Keywords: alloy; electrical field; electro growth; growth eutectic ... See more keywords
Thermal reliability of Al-Si eutectic alloy for thermal energy storage
Sign Up to like & getrecommendations! Published in 2017 at "Materials Research Bulletin"
DOI: 10.1016/j.materresbull.2017.07.040
Abstract: Abstract The thermal reliability of Al-Si eutectic alloy as phase change materials (PCMs) was investigated through vacuum thermal cycling 250, 500, 750, and 1000 times going through the solid-liquid phase change. The changes in thermal… read more here.
Keywords: alloy; eutectic alloy; thermal energy; thermal reliability ... See more keywords