Sign Up to like & get recommendations! 1
Published in 2017 at "Aiche Journal"
DOI: 10.1002/aic.15704
Abstract: The plug flow of a non-Newtonian and a Newtonian liquid was experimentally investigated in a quartz microchannel (200-µm internal diameter). Two aqueous glycerol solutions containing xanthan gum at 1000 and 2000 ppm were the non-Newtonian… read more here.
Sign Up to like & get recommendations! 1
Published in 2017 at "Journal of Engineering Physics and Thermophysics"
DOI: 10.1007/s10891-017-1542-9
Abstract: A technique of processing test data with account for the continuous action of climatic factors on heat transfer of glass-reinforced plastics is suggested. read more here.
Sign Up to like & get recommendations! 1
Published in 2020 at "Journal of Phase Equilibria and Diffusion"
DOI: 10.1007/s11669-020-00826-0
Abstract: Phase equilibria in the Ni-Si-Zr ternary system have been investigated experimentally by means of x-ray diffraction and electron probe micro-analyzer on equilibrated ternary alloys. Four ternary phases were detected at 1023 and 1173 K. The Ni16Si7Zr6… read more here.
Sign Up to like & get recommendations! 1
Published in 2017 at "International Journal of Metalcasting"
DOI: 10.1007/s40962-017-0140-0
Abstract: Metallic material compounds are of technical interest as they allow the combining of specific properties of different materials into one component. In particular, compounds of copper (Cu) and aluminum (Al) are a current object of… read more here.
Sign Up to like & get recommendations! 0
Published in 2017 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2016.11.078
Abstract: Abstract This paper reports on the experimental investigations in a non-steady state mode of a small capacity commercial diffusion-absorption refrigerator (DAR) and the development of a dynamic black-box model for the machine. For these investigations,… read more here.
Sign Up to like & get recommendations! 0
Published in 2020 at "Aerospace Science and Technology"
DOI: 10.1016/j.ast.2020.106187
Abstract: Abstract To study the influence of injector geometrical parameters on combustor flow fields, detailed numerical and experimental investigations of a single-element injector with gaseous hydrogen and gaseous oxygen (GH2/GO2) propellants were performed at atmospheric pressure.… read more here.
Sign Up to like & get recommendations! 0
Published in 2020 at "Composite Structures"
DOI: 10.1016/j.compstruct.2020.112527
Abstract: Abstract This paper presents the results of experimental investigations on the pullout properties of circumferentially notched z-pins in carbon-fiber/epoxy prepreg laminates with unidirectional (UD) and quasi-isotropic (QI) fiber orientation. Four different notch depths between 10… read more here.
Sign Up to like & get recommendations! 0
Published in 2017 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2016.11.127
Abstract: Abstract This paper presents experimental investigations on monotonic and cyclic behaviours of hardwood timber joints. Two sets of connections have been tested: double shear single dowelled timber-to-timber and slotted-in steel plate-to-timber joints. Three wood species… read more here.
Sign Up to like & get recommendations! 0
Published in 2018 at "Case Studies in Construction Materials"
DOI: 10.1016/j.cscm.2018.e00176
Abstract: Abstract In France, the vertical deflection measurements of Chevire free end cantilever bridge have shown unexpected excessive creep deformations. To understand this phenomenon, a large experimental database coming from different laboratories and research centers is… read more here.
Sign Up to like & get recommendations! 0
Published in 2018 at "Experimental Thermal and Fluid Science"
DOI: 10.1016/j.expthermflusci.2018.06.014
Abstract: Abstract In the present paper, the interactions between a cavitation bubble and a spherical particle are experimentally investigated with the aid of high-speed camera. The cavitation bubble is generated by a focused laser beam with… read more here.
Sign Up to like & get recommendations! 0
Published in 2021 at "Flow Measurement and Instrumentation"
DOI: 10.1016/j.flowmeasinst.2021.102002
Abstract: Abstract In an attempt to redefine and improve the ISO9300 norm, it is possible to see the emergence of a universal ( C d ) curve. For this, all the influential factors must be correctly… read more here.