An experimental and numerical study of the influence of viscosity on the behavior of dam-break flow
Sign Up to like & getrecommendations! Published in 2021 at "Theoretical and Computational Fluid Dynamics"
DOI: 10.1007/s00162-021-00562-2
Abstract: In this paper, experimental and numerical methods are presented to investigate the dam-break flow in a horizontal rectangular section flume. In the experimental part of the research, different configurations have been tested: dry flume and… read more here.
Keywords: break flow; viscosity; experimental numerical; break ... See more keywords
RC-columns subjected to lateral cyclic force with different FRCM-strengthening schemes: experimental and numerical investigation
Sign Up to like & getrecommendations! Published in 2025 at "Bulletin of Earthquake Engineering"
DOI: 10.1007/s10518-025-02100-5
Abstract: The vulnerability of Reinforced Concrete (RC) structures against seismic events has prompted extensive research into retrofitting techniques aimed at enhancing their seismic performance. Among these, Fabric-Reinforced Cementitious Matrix/Mortar (FRCM) systems have gained prominence as promising… read more here.
Keywords: numerical investigation; investigation; experimental numerical; columns ... See more keywords
Experimental and Numerical Simulation to Investigate the Effects of Membrane Fouling on the Heat and Mass Transfer
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Thermophysics"
DOI: 10.1007/s10765-018-2471-3
Abstract: Nanoporous tubular ceramic membranes (TCMs) are commonly used to extract water vapor and to recover latent heat from flue gas in thermal power plants. Water vapor condenses on the surface of the outer wall of… read more here.
Keywords: water; water recovery; experimental numerical; heat ... See more keywords
Experimental and numerical analysis in heat flow sensors calibration
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Thermal Analysis and Calorimetry"
DOI: 10.1007/s10973-019-08321-6
Abstract: The 2010/31/CE directive has highlighted the necessity to improve the energy efficiency in buildings, since they are responsible for 40% of energy consumption and 36% of CO2 emissions in the EU. In situ measurements of… read more here.
Keywords: numerical analysis; experimental numerical; calibration; heat ... See more keywords
Melting process of paraffin wax inside plate heat exchanger: experimental and numerical study
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Thermal Analysis and Calorimetry"
DOI: 10.1007/s10973-020-09275-w
Abstract: In this paper, an experimental and numerical study has been performed on melting process of commercial Iranian paraffin wax, with melting temperature of about 60 °C, inside a plate heat exchanger. A 500 × 100 mm plate thermal storage… read more here.
Keywords: paraffin wax; experimental numerical; melting process; plate ... See more keywords
Experimental and numerical investigation of the uncut chip thickness reduction in Ti6Al4V orthogonal cutting
Sign Up to like & getrecommendations! Published in 2017 at "Meccanica"
DOI: 10.1007/s11012-016-0499-7
Abstract: The downsizing of traditional cutting (“macro-cutting”) to micro-cutting introduces changes in the cutting process. The uncut chip thickness decreases and the cutting edge radius of the tool cannot be neglected anymore. The minimum chip thickness… read more here.
Keywords: orthogonal cutting; experimental numerical; chip thickness; chip ... See more keywords
Experimental and Numerical Study on Polymer Ablated Arc Characteristics with One Side Flow Outlet Model
Sign Up to like & getrecommendations! Published in 2024 at "Plasma Chemistry and Plasma Processing"
DOI: 10.1007/s11090-024-10451-1
Abstract: An experimental and numerical study was conducted on the polymer ablated arc with an electrode configuration of a one-side gas flow outlet model. The polymers used for molded case circuit breaker and gas circuit breaker,… read more here.
Keywords: experimental numerical; ablated arc; ablation; polymer ... See more keywords
Experimental and Numerical Investigation of PZT Response in Composite Structures with Variable Degradation Levels
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04011-4
Abstract: Commercial aerospace vehicles have been increasingly demanding to withstand harsh conditions with low-weight material, i.e., composites. Unfortunately, low-velocity impacts strongly affect their performance. Structural health monitoring with permanently attached sensors allows achieving cost-effective maintenance and… read more here.
Keywords: investigation pzt; degradation; experimental numerical; numerical investigation ... See more keywords
Experimental and numerical investigations regarding laser drop on demand jetting of Cu alloys
Sign Up to like & getrecommendations! Published in 2017 at "Production Engineering"
DOI: 10.1007/s11740-017-0737-4
Abstract: Active noise reduction, structural health monitoring and energy harvesting are possible applications of active structure components. An integration of piezoceramic modules into casted Al-structures can be defined as a long term goal to achieve high… read more here.
Keywords: experimental numerical; drop demand; geometry; laser ... See more keywords
Experimental and numerical analysis of aerodynamic effects of repair patches on damaged airfoils
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-016-1220-4
Abstract: This investigation assesses the change of aerodynamic characteristics of triangular and star-shaped damaged airfoils with repair patches. Both experimental and numerical methods to determine aerodynamic coefficients are used in this study. The test model is… read more here.
Keywords: damaged airfoils; effects repair; model; experimental numerical ... See more keywords
Experimental and numerical study of coal swirl fluidized bed drying on 100 angle of guide vane
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-019-1042-2
Abstract: Currently, low-rank coal is widely used as fuel in power plants. The swirl flow method is quite effective used to increase heating value through the drying process. This research studies the characteristics of low-rank coal… read more here.
Keywords: numerical study; study coal; experimental numerical; 100 angle ... See more keywords