Articles with "experimental testing" as a keyword



Photo from wikipedia

An experimental testing and analysis procedure to determine linear viscoelastic properties of asphalt binder microstructural components

Sign Up to like & get
recommendations!
Published in 2020 at "Construction and Building Materials"

DOI: 10.1016/j.conbuildmat.2019.116999

Abstract: Abstract This study aims to propose a carefully – designed experimental testing and analysis procedure to determine linear viscoelastic properties of asphalt binder constituents in three aging conditions. To this end, three major constituents are… read more here.

Keywords: linear viscoelastic; procedure determine; experimental testing; analysis ... See more keywords
Photo from wikipedia

3D nonlinear finite element modelling of mechanical behavior of a new wall-beam-strut joint for prefabricated underground construction and validation again experimental testing

Sign Up to like & get
recommendations!
Published in 2021 at "Structures"

DOI: 10.1016/j.istruc.2021.06.059

Abstract: This paper studies the nonlinear mechanical performance of a new wall-beam-strut joint with the welded steel plate connection proposed for prefabricated underground construction under monotonic and low-reversed cyclic loading conditions using the three-dimensional finite element… read more here.

Keywords: beam strut; underground construction; strut joint; prefabricated underground ... See more keywords
Photo from wikipedia

Experimental testing of low-energy rockfall catch fence meshes

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of rock mechanics and geotechnical engineering"

DOI: 10.1016/j.jrmge.2018.01.004

Abstract: Abstract Flexible catch fences are widely used to protect infrastructure like railways, roads and buildings from rockfall damage. The wire meshes are the most critical components for catch fences as they dissipate most of the… read more here.

Keywords: energy; experimental testing; fence; wire meshes ... See more keywords
Photo from wikipedia

Engineering and experimental testing of prototypes of biogas equipment

Sign Up to like & get
recommendations!
Published in 2020 at "Renewable Energy"

DOI: 10.1016/j.renene.2020.06.127

Abstract: Abstract The testing production of equipment that allows making biogas is based on standard techniques and methods for implementing the principle of biogas production. The main differentiation between samples of equipment is to sell products… read more here.

Keywords: production; biogas production; equipment; experimental testing ... See more keywords
Photo from wikipedia

Experimental testing of ceramic solar collectors

Sign Up to like & get
recommendations!
Published in 2017 at "Solar Energy"

DOI: 10.1016/j.solener.2017.03.022

Abstract: Abstract An alternative to traditional solar collectors with absorbers made of metal or plastic can be panels which have their whole structure made of ceramics. The paper presents the results of the testing of ceramic… read more here.

Keywords: solar collectors; experimental testing; testing ceramic; ceramic solar ... See more keywords
Photo from wikipedia

Static Behavior of Cob: Experimental Testing and Finite-Element Modeling

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Materials in Civil Engineering"

DOI: 10.1061/(asce)mt.1943-5533.0002638

Abstract: AbstractThe aim of this paper is to implement a numerical model to reproduce the nonlinear behavior of cob walls under shear loading. Axial compression, pull-off, and diagonal compression tests wer... read more here.

Keywords: behavior cob; cob experimental; static behavior; behavior ... See more keywords
Photo by mykjohnson from unsplash

Experimental Testing of a Replaceable Brace Module for Seismically Designed Concentrically Braced Steel Frames

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Structural Engineering"

DOI: 10.1061/(asce)st.1943-541x.0002283

Abstract: AbstractFor a seismically designed concentrically braced frame with hollow structural sections as braces, the typical connection design consists of a slotted brace that is field welded to a gusset ... read more here.

Keywords: designed concentrically; testing replaceable; seismically designed; brace ... See more keywords
Photo by jrkorpa from unsplash

RC walls in Australia: reconnaissance survey of industry and literature review of experimental testing

Sign Up to like & get
recommendations!
Published in 2017 at "Australian Journal of Structural Engineering"

DOI: 10.1080/13287982.2017.1315207

Abstract: Abstract This paper presents the findings of a recent reconnaissance survey of the reinforced concrete (RC) construction industry in Australia. The survey involved the review of the structural documentation of a set of case study… read more here.

Keywords: experimental testing; survey; review experimental; reconnaissance survey ... See more keywords
Photo by jovisjoseph from unsplash

Experimental testing of a prototype cantilevered liquid-nitrogen-cooled silicon mirror

Sign Up to like & get
recommendations!
Published in 2023 at "Journal of Synchrotron Radiation"

DOI: 10.1107/s1600577522010700

Abstract: Experimental testing of a liquid-nitrogen-cooled silicon mirror is reported. This testing covered fracture, heat transfer, modal response and distortion. read more here.

Keywords: silicon mirror; nitrogen cooled; experimental testing; liquid nitrogen ... See more keywords
Photo from wikipedia

Experimental testing of hypotheses for temperature- and pH-based niche specialisation of ammonia oxidising archaea and bacteria.

Sign Up to like & get
recommendations!
Published in 2020 at "Environmental microbiology"

DOI: 10.1111/1462-2920.15192

Abstract: Investigation of niche specialisation in microbial communities is important in assessing consequences of environmental change for ecosystem processes. Ammonia oxidising bacteria (AOB) and archaea (AOA) present a convenient model for studying niche specialisation. They coexist… read more here.

Keywords: temperature; experimental testing; niche; niche specialisation ... See more keywords
Photo from wikipedia

Developing A Biomechanical Testing Setup Of The Pelvis, Part II - Experimental Testing.

Sign Up to like & get
recommendations!
Published in 2023 at "Journal of biomechanical engineering"

DOI: 10.1115/1.4062578

Abstract: Biomechanical testbench emulating the physiological loading of the pelvis is crucial in developing reconstructive implants for fragility fractures of the pelvis. Additionally, it will help understand the influence of the common daily loading on the… read more here.

Keywords: setup; experimental testing; design; biomechanical testing ... See more keywords