Effect of extrusion temperature on microstructure and properties of an ultrafine-grained Cu matrix nanocomposite fabricated by powder compact extrusion
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science"
DOI: 10.1007/s10853-017-1952-2
Abstract: AbstractUltrafine-grained Cu–5 vol%Al2O3 nanocomposite rods were fabricated by a combination of high-energy mechanical milling of Cu and Al2O3 powders and powder compact extrusion at 300, 500, 700 and 900 °C. The extruded rods were investigated to evaluate… read more here.
Keywords: temperature; powder compact; effect; extrusion temperature ... See more keywords
Effect of hot extrusion temperature on graphene nanoplatelets reinforced Al6061 composite fabricated by pressure infiltration method
Sign Up to like & getrecommendations! Published in 2020 at "Carbon"
DOI: 10.1016/j.carbon.2020.02.080
Abstract: Abstract In the present work, 0.6 wt% graphene nanoplatelets reinforced 6061Al (GNPs/6061Al) composite was prepared by pressure infiltration process and hot extruded (HE) at 420 °C∼500 °C in order to investigate the evolution of GNPs in different extrusion… read more here.
Keywords: graphene; extrusion temperature; graphene nanoplatelets; nanoplatelets reinforced ... See more keywords
Effect of extrusion temperature on the protein aggregation of wheat gluten with the addition of peanut oil during extrusion.
Sign Up to like & getrecommendations! Published in 2020 at "International journal of biological macromolecules"
DOI: 10.1016/j.ijbiomac.2020.11.017
Abstract: The influence of extrusion temperature on protein components and aggregation of wheat gluten (WG) and wheat gluten-peanut oil complexes (WPE) during extrusion with the addition of peanut oil was studied. Gliadin content and wheat gluten… read more here.
Keywords: temperature; wheat gluten; extrusion temperature; extrusion ... See more keywords
Effect of extrusion temperature on microstructure, thermal conductivity and mechanical properties of a Mg-Ce-Zn-Zr alloy
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.01.203
Abstract: Abstract Mg-0.80Ce-0.69Zn-0.03Zr (wt %) alloys were prepared in the state of as-cast, by homogenization treatment at 713 K for 12 h and extruded at 573 K, 623 K, and 673 K with an extrusion ratio of 10.24: 1. Experimental results… read more here.
Keywords: temperature; effect extrusion; thermal conductivity; extrusion temperature ... See more keywords
Role of extrusion temperature on the microstructure evolution and tensile properties of an ultralight Mg-Li-Zn-Er alloy
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2021.160181
Abstract: Abstract Role of extrusion temperature on the microstructure evolution and tensile properties of an ultralight Mg-10Li-5Zn-0.5Er alloy was studied. The results indicate that the second phases and grains are all refined after extrusion. It is… read more here.
Keywords: extrusion; extrusion temperature; role extrusion; tensile properties ... See more keywords
Effect of extrusion temperature on microstructure and mechanical properties of a low-alloying and ultra-high strength Mg–Zn–Ca–Mn matrix composite containing trace TiC nanoparticles
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Magnesium and Alloys"
DOI: 10.1016/j.jma.2020.04.006
Abstract: Abstract Mechanical properties of microalloying Mg–2.2Zn–1.8Ca–0.5Mn (wt%) matrix composites reinforced by 0.5 wt% TiC nanoparticles before and after extrusion were investigated based on the detailed microstructural analysis. A uniform distribution of TiC nanoparticles was realized in… read more here.
Keywords: strength; tic nanoparticles; effect; extrusion temperature ... See more keywords
Effect of Extrusion Temperature and Feed Moisture Content on the Microstructural Properties of Rice-Flour Pellets and Their Impact on the Expanded Product
Sign Up to like & getrecommendations! Published in 2022 at "Foods"
DOI: 10.3390/foods11020198
Abstract: Extrusion can lead to an expanded product or to a slightly expanded pellet, known as a third-generation (3G) snack. In this case, expansion occurs subsequently, in an independent thermal device (e.g., oven), out of the… read more here.
Keywords: expanded product; moisture content; extrusion; extrusion temperature ... See more keywords
Effect of Extrusion Temperature on the Microstructure and Mechanical Properties of SiCnw/2024Al Composite
Sign Up to like & getrecommendations! Published in 2019 at "Materials"
DOI: 10.3390/ma12172769
Abstract: In the present research work, the effect of extrusion temperature from 480 to 560 °C on the microstructure and mechanical behavior of the SiCnw/2024Al composite (15 vol.%) has been explored. It has been found that… read more here.
Keywords: temperature; sicnw 2024al; effect extrusion; extrusion temperature ... See more keywords
Influence of Extrusion Temperature on Properties of Graphene Oxide-Carbon Fiber/Epoxy Composite Prepared by Vacuum Infiltration Hot-Press-Forming Experimental System
Sign Up to like & getrecommendations! Published in 2022 at "Nanomaterials"
DOI: 10.3390/nano12213839
Abstract: Graphene oxide-carbon fiber/epoxy (GO-CF/EP) composites with extrusion temperatures of 30, 40, 50, 60 and 70 °C were prepared by a vacuum infiltration hot-press-forming experimental system (VIHPS). The effects of extrusion temperature on the microstructure, fracture… read more here.
Keywords: infiltration; matrix; fiber; temperature ... See more keywords