Sign Up to like & get
recommendations!
0
Published in 2019 at "JOM"
DOI: 10.1007/s11837-019-03833-w
Abstract: Cu-55 vol.%diamond-1 vol.%Ti composites were fabricated by hot-forging of powder mixtures (referred to as M-Cu/Dia) and cold-pressed powder preforms (referred to as P-Cu/Dia). Dispersion of diamond particles in the size range of 70–80 µm at 55% volume fraction…
read more here.
Keywords:
composites fabricated;
fabricated hot;
powder;
pressed powder ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.05.304
Abstract: Abstract Highly transparent Nd-doped yttria ceramics were fabricated by hot-pressing at 1600 °C with single addition and co-addition of ZrO2 and La2O3. The binary additives were found to promote the densification of yttria more effectively than…
read more here.
Keywords:
fabricated hot;
yttria ceramics;
zro2 la2o3;
doped yttria ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.12.272
Abstract: Abstract In this work, laminated Al/Ti composites were fabricated by hot rolling at three different temperatures (400 °C, 450 °C and 500 °C). The deformation behavior and fracture mechanism of composites were studied by the in-situ tensile test.…
read more here.
Keywords:
fracture;
fabricated hot;
deformation;
composites fabricated ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2018 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2018.04.056
Abstract: Abstract In this work, highly transparent yttria ceramics Φ = 55 mm in size were fabricated by a hot-pressing method with 1 at.% ZrO2 or 12 at.% La2O3 as a sintering additive. For a 4-mm-thick specimen doped with…
read more here.
Keywords:
fabricated hot;
transparent yttria;
optical thermo;
yttria ceramics ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2021 at "Materials Research Express"
DOI: 10.1088/2053-1591/abd8a0
Abstract: Ti-6Al-4V titanium alloy specimens fabricated through hot isostatic pressing (HIP) were made by multi-pass thermal deformation. The temperature was 950 °C, 850 °C and 900 °C for one pass, two passes and three passes, respectively,…
read more here.
Keywords:
fabricated hot;
deformation;
strain rate;
pass ... See more keywords