Comparative investigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressing
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.06.225
Abstract: Abstract Near-fully dense Al-12Si matrix composites reinforced with TiB2 ceramic particles (2 wt%) were successfully fabricated by selective laser melting (SLM) and hot pressing (HP) of powder mixtures. TiB2 ceramic particles are homogeneously distributed in the… read more here.
Keywords: selective laser; fabricated selective; 12si tib2; tib2 ... See more keywords
The corrosion behavior of Ti6Al4V fabricated by selective laser melting in the artificial saliva with different fluoride concentrations and pH values
Sign Up to like & getrecommendations! Published in 2020 at "Corrosion Science"
DOI: 10.1016/j.corsci.2020.109097
Abstract: Abstract The corrosion behavior of the SLM and wrought Ti6Al4V are comparatively investigated. The critical NaF concentrations of SLM Ti6Al4V in the three cases of pH = 2, 4 and 6 are 0.0020 M, 0.080 M and 0.10 M, respectively,… read more here.
Keywords: ti6al4v fabricated; behavior ti6al4v; fabricated selective; corrosion ... See more keywords
Influence of manufacturing geometric defects on the mechanical properties of AlSi10Mg alloy fabricated by selective laser melting
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.03.135
Abstract: Abstract The tensile behavior of bulk AlSi10Mg components, fabricated by selective laser melting (SLM), was investigated by uniaxial tensile testing and image-based finite element simulation. The initial morphological features of the structures were imaged by… read more here.
Keywords: fabricated selective; finite element; laser melting; model ... See more keywords
Microstructural characteristic and mechanical properties of titanium-copper alloys in-situ fabricated by selective laser melting
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2021.161032
Abstract: Abstract In this paper, Ti-Cu alloys were in-situ fabricated by selective laser melting (SLM) with 1.25, 2.5 and 5 wt% Cu contents, namely Ti-1.25Cu, Ti-2.5Cu and Ti-5Cu, respectively. The microstructural characteristic and mechanical properties of Ti-Cu… read more here.
Keywords: fabricated selective; alloys situ; laser melting; selective laser ... See more keywords
Electrochemical noise comparative study of pitting corrosion of 316L stainless steel fabricated by selective laser melting and wrought
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Electroanalytical Chemistry"
DOI: 10.1016/j.jelechem.2021.115351
Abstract: Abstract Two kinds of 316L stainless steel (SS) were fabricated by selective laser melting (SLM) technique with laser scanning speeds of 600 mm/s and 1200 mm/s. The pitting corrosion behavior of the SLM 316L SS was comparatively… read more here.
Keywords: fabricated selective; stainless steel; 316l stainless; steel fabricated ... See more keywords
Characterisation of a novel Sc and Zr modified Al–Mg alloy fabricated by selective laser melting
Sign Up to like & getrecommendations! Published in 2017 at "Materials Letters"
DOI: 10.1016/j.matlet.2017.03.089
Abstract: Abstract Correlations between densification, hardness and electrical conductivity were investigated over a wide range of applied volumetric energy densities (E) for an Al–Mg–Sc–Zr alloy fabricated by selective laser melting. It is shown that porosity dominates… read more here.
Keywords: selective laser; fabricated selective; alloy fabricated; laser melting ... See more keywords
Effect of Nb additions on microstructure and properties of γ-TiAl based alloys fabricated by selective laser melting
Sign Up to like & getrecommendations! Published in 2019 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(19)65009-0
Abstract: Abstract The γ-TiAl based Ti–Al–Mn–Nb alloys with different Nb additions were fabricated by selective laser melting (SLM) on the TC4 substrate. The effects of Nb content on microstructure and properties of the alloys were investigated.… read more here.
Keywords: fabricated selective; tial based; laser melting; selective laser ... See more keywords
Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
Sign Up to like & getrecommendations! Published in 2019 at "Russian Metallurgy (Metally)"
DOI: 10.1134/s0036029519040098
Abstract: Abstract —The mechanical properties and the fracture mechanisms of the AlSi10Mg alloy fabricated by selective laser melting at various angles to the base are studied. The alloy is tested under static and cyclic deformation conditions.… read more here.
Keywords: fabricated selective; alloy fabricated; strength; alsi10mg alloy ... See more keywords
Research on Microstructure and Properties of AlSi10Mg Fabricated by Selective Laser Melting
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15072528
Abstract: In order to obtain high-performance aluminum alloy parts fabricated by selective laser melting, this paper investigates the relationship between the process parameters and microstructure properties of AlSi10Mg. The appropriate process parameters are obtained: the layer… read more here.
Keywords: strength; microstructure properties; laser; fabricated selective ... See more keywords
The Mechanisms of Inhibition Effects on Bubble Growth in He-Irradiated 316L Stainless Steel Fabricated by Selective Laser Melting
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16113922
Abstract: The AISI 316L austenitic stainless steel fabricated by selective laser melting (SLM) is considered to have great prospects for applications in nuclear systems. This study investigated the He-irradiation response of SLM 316L, and several possible… read more here.
Keywords: stainless steel; fabricated selective; laser melting; slm 316l ... See more keywords