LAUSR

About LAUSR
Donate
Contact Us

Follow us:

You are not signed in:

Sign Up!


   Articles with "fabricated using" as a keyword



Nanoforest-based SERS sensor fabricated using a maskless process for detecting chemical and pathogen

Sign Up to like & get
recommendations! Published in 2019 at "Microsystem Technologies"

DOI: 10.1007/s00542-019-04335-0

Abstract: Nanoscale silicon forest-based surface enhanced Raman spectroscopy (SERS) sensor was fabricated using a simple maskless Bosch process method. Silicon nanoforest was further coated with gold and grafted with silver-plate nanoparticles. Fabricated SERS sensor was then… read more here.

Keywords: fabricated using; process; sers sensor; based sers ... See more keywords
Photo from wikipedia

Fully controllable silicon nanowire fabricated using optical lithography and orientation dependent oxidation

Sign Up to like & get
recommendations! Published in 2020 at "Applied Surface Science"

DOI: 10.1016/j.apsusc.2020.146516

Abstract: Abstract Silicon nanowires (SiNWs) exhibit unique electrical, thermal, and optical properties compared to bulk silicon which make them suitable for various device applications. To realize nanowires in real applications, large-scale and low-cost fabrication method is… read more here.

Keywords: lithography orientation; using optical; optical lithography; orientation dependent ... See more keywords

Corrosion assessment of Ti-6Al-4V fabricated using laser powder-bed fusion additive manufacturing

Sign Up to like & get
recommendations! Published in 2018 at "Electrochimica Acta"

DOI: 10.1016/j.electacta.2018.04.189

Abstract: Abstract We describe the interfacial characteristics of a Ti-6Al-4V alloy fabricated using laser powder-bed fusion (L-PBF) upon exposure to a corrosive environment and tribocorrosion conditions. Electrochemical techniques in both the time and frequency domains demonstrated… read more here.

Keywords: powder bed; using laser; bed fusion; laser powder ... See more keywords
Photo from archive.org

Anisotropic nanocrystalline SmCo4.8Cr0.12C0.08 permanent magnets fabricated using melt-spinning method

Sign Up to like & get
recommendations! Published in 2017 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2017.03.311

Abstract: Abstract Anisotropic CaCu5-type SmCo4.8Cr0.12C0.08 alloys with a dendritic nanostructure and an out-of-plane texture were fabricated using the melt-spinning method at a speed of 50 m/s. The microstructure changed from randomly orientated equiaxial grains for the ribbon… read more here.

Keywords: smco4 8cr0; 8cr0 12c0; using melt; spinning method ... See more keywords
Photo from wikipedia

Characterization of porous fluorohydroxyapatite bone-scaffolds fabricated using freeze casting.

Sign Up to like & get
recommendations! Published in 2021 at "Journal of the mechanical behavior of biomedical materials"

DOI: 10.1016/j.jmbbm.2021.104717

Abstract: With the increasing demand for orthopedic and dental reconstruction surgeries, there comes a shortage of viable bone substitutes. This study was therefore designed to assess the efficacy of porous fluorohydroxyapatite (FHA) as a potential bone… read more here.

Keywords: fha; bone; fabricated using; fha scaffolds ... See more keywords

Study of microstructure evolution and preference growth direction in a fully laminated directional micro-columnar TiAl fabricated using laser additive manufacturing technique

Sign Up to like & get
recommendations! Published in 2019 at "Materials Letters"

DOI: 10.1016/j.matlet.2019.01.137

Abstract: Abstract In this study, a fully laminated Ti-48Al-2Nb-2Cr alloy plate with no cracks and aluminum loss is successfully fabricated using laser additive manufacturing technique. A well-aligned micro-columnar microstructure is expected to grow along the deposition… read more here.

Keywords: fully laminated; growth; laser additive; fabricated using ... See more keywords

Three-Dimensional Hierarchical Nanofibrous Collagen Scaffold Fabricated Using Fibrillated Collagen and Pluronic F-127 for Regenerating Bone Tissue.

Sign Up to like & get
recommendations! Published in 2018 at "ACS applied materials & interfaces"

DOI: 10.1021/acsami.8b14088

Abstract: It is well known that a nanoscale fibrous structure can provide a unique stage for encouraging reasonable cell activities including attachment and proliferation owing to its similar topological structure to the extracellular matrix. Hence, the… read more here.

Keywords: collagen; nanofibrous collagen; tissue; collagen scaffold ... See more keywords

Drug response analysis for scaffold-free cardiac constructs fabricated using bio-3D printer

Sign Up to like & get
recommendations! Published in 2020 at "Scientific Reports"

DOI: 10.1038/s41598-020-65681-y

Abstract: Cardiac constructs fabricated using human induced pluripotent stem cells-derived cardiomyocytes (iPSCs-CMs) are useful for evaluating the cardiotoxicity of and cardiac response to new drugs. Previously, we fabricated scaffold-free three-dimensional (3D) tubular cardiac constructs using a… read more here.

Keywords: constructs fabricated; response; drug response; fabricated using ... See more keywords

A self-healing and deformation responsive supercapacitor fabricated using a smart gel polymer electrolyte and a redox-activated electrode

Sign Up to like & get
recommendations! Published in 2024 at "Journal of Materials Chemistry C"

DOI: 10.1039/d4tc02245a

Abstract: A flexible intelligent supercapacitor is fabricated using a smart gel polymer electrolyte (PVA–H3BO3–H2SO4–MB–Na2MoO4) and a redox-activated electrode to achieve superior pseudocapacitance, self-healing and deformation responsive properties. read more here.

Keywords: smart gel; fabricated using; gel polymer; supercapacitor fabricated ... See more keywords
Photo by younis67 from unsplash

Thermoelectric properties of paracostibite fabricated using chemically synthesized Co–Sb–S nanoparticles as building blocks

Sign Up to like & get
recommendations! Published in 2020 at "AIP Advances"

DOI: 10.1063/5.0012463

Abstract: Paracostibite (CoSbS) is a promising candidate for n-type thermoelectric materials. In this study, a nanostructured CoSbS pellet was fabricated using chemically synthesized Co–Sb–S nanoparticles as building blocks. The CoSbS pellet showed the highest electrical conductivity… read more here.

Keywords: synthesized nanoparticles; chemically synthesized; building blocks; using chemically ... See more keywords

A review on application of FGM fabricated using solid-state processes

Sign Up to like & get
recommendations! Published in 2020 at "Advances in Materials and Processing Technologies"

DOI: 10.1080/2374068x.2020.1731153

Abstract: ABSTRACT Functionally graded materials are special class of composites in which different materials are graded based on applications desired. Depending upon the gradation variation, whether continuous or discrete, the manufacturing processes are categorized. Powder metallurgy… read more here.

Keywords: fabricated using; state processes; using solid; material ... See more keywords