Fabrication and characterization of poly(vinyl alcohol)—Glycerol—Spinel ferrites flexible membranes
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.48821
Abstract: This work was supported by Qatar University under grant number QUCG?CAS?20182019?1. The FTIR, DSC, TGA, SEM, and EDS measurements were accomplished in the Central Laboratories unit at Qatar University. read more here.
Keywords: fabrication characterization; characterization poly; glycerol spinel; vinyl alcohol ... See more keywords
Fabrication and Characterization of Composite Nanofibrous Membranes With TiO2 Particles Against UV Radiation
Sign Up to like & getrecommendations! Published in 2025 at "Polymers for Advanced Technologies"
DOI: 10.1002/pat.70102
Abstract: This study employs electrospinning to fabricate and characterize composite nanofibrous layers composed of polyamide 6 and titanium dioxide (TiO₂) particles. Polyamide 6 solutions were prepared with varying TiO₂ concentrations (5, 10, 15, 20, 30, 40,… read more here.
Keywords: radiation; nanofibrous layers; characterization composite; fabrication characterization ... See more keywords
Design, fabrication and characterization of laser patterned LTCC micro hotplate with stable interconnects for gas sensor platform
Sign Up to like & getrecommendations! Published in 2019 at "Microsystem Technologies"
DOI: 10.1007/s00542-018-4079-8
Abstract: The present paper presents design, fabrication and characterization of low temperature co-fired ceramics (LTCC)-based micro hotplates. Laser irradiation is used to pattern fired conductive paste over LTCC substrate to generate fine meander shaped heater patterns.… read more here.
Keywords: fabrication characterization; design fabrication; characterization laser; micro hotplate ... See more keywords
Fabrication and characterization of bulk nanoporous Cu with hierarchical pore structure
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science"
DOI: 10.1007/s10853-017-1356-3
Abstract: In the present study, bulk nanoporous Cu materials with hierarchical porous structure and fine ligaments have been facilely fabricated through chemical dealloying of CuAl alloy that prepared by suction casting. Effect of dealloying temperature on… read more here.
Keywords: nanoporous hierarchical; fabrication characterization; bulk; structure ... See more keywords
Fabrication and characterization of highly porous Ti6Al4V/xTa composites for orthopedic applications
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Science"
DOI: 10.1007/s10853-020-05166-5
Abstract: This paper presents the processing and properties of Ti6Al4V/xTa porous materials for potential use as bone implants. The processing route includes powder mixing, die pressing and solid state sintering. The porosity was created by 30… read more here.
Keywords: vol salt; fabrication characterization; characterization highly; ti6al4v xta ... See more keywords
Research on hydrophobicity treatment of aluminum nitride powder and the fabrication and characterization of AlN/PTFE composite substrates
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-9627-6
Abstract: A study on fabrication and characterization of different filler ratios AlN/ PTFE composite substrates was described. Phenyltrimethoxysilane (Z6124) was used to modify AlN ceramic powder. The contents of Z6124 were 0.8, 1.0, 1.2, 1.4, 1.6 wt%,… read more here.
Keywords: composite substrates; fabrication characterization; aln ptfe; powder ... See more keywords
Versatile fabrication and characterization of Cu-doped ZrO2 nanoparticles: enhanced photocatalytic and photoluminescence properties
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-020-03296-9
Abstract: Pristine ZrO2 and molar ratios of Cu-doped ZrO2 nanoparticles were synthesized by chemical precipitation. The XRD pattern of pristine ZrO2 and Cu-doped ZrO2 nanoparticles shows the formation of t-tetragonal phase and shifting of tetragonal phase… read more here.
Keywords: pristine zro2; zro2 nanoparticles; fabrication characterization; zro2 ... See more keywords
Fabrication and characterization of Cu2S/ZnO nanorods photoelectrode for photoelectrochemical cell
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-020-04142-8
Abstract: In this study, Cu2S/ZnO nanorods arrays (NRAs) nanocomposite have been efficiently papered via dual methods: firstly, ZnO NRAs by a hydrothermal method, and secondly Cu2S nanoparticles via successive ionic layer adsorption (SILAR). Cu2S/ZnO photoelectrode is… read more here.
Keywords: fabrication characterization; zno; zno nras; zno nanorods ... See more keywords
Fabrication and characterization of bioactive chitosan microspheres incorporated with mesoporous silica nanoparticles for biomedical applications
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Porous Materials"
DOI: 10.1007/s10934-019-00837-4
Abstract: Mesoporous silica nanoparticles (MSNs) were prepared using sol–gel method. Chitosan-MSNs microspheres scaffold loaded with ciprofloxacin also prepared via an ionotropic gelation method. The prepared samples were characterized using FE-SEM, TEM, FTIR and XRD analysis. The… read more here.
Keywords: msns; fabrication characterization; mesoporous silica; silica nanoparticles ... See more keywords
Fabrication and characterization of hollow nanofibrous PA6 yarn reinforced with CNTs
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Polymer Research"
DOI: 10.1007/s10965-018-1477-7
Abstract: Core-sheath nanofibrous yarns were obtained through electrospinning of polyamide 6 (PA6) solution containing different concentrations of multi-wall carbon nanotubes (MWNTs) as sheath and PVA multifilament as the yarn core. By dissolving PVA, for obtaining conductive… read more here.
Keywords: fabrication characterization; yarn; nanofibrous pa6; characterization hollow ... See more keywords
Fabrication, characterization, spectroscopic, and magnetic properties of polyaniline/magnetite (PANi/Fe3O4) nanocomposites
Sign Up to like & getrecommendations! Published in 2024 at "Optical and Quantum Electronics"
DOI: 10.1007/s11082-024-06843-4
Abstract: In this research, pure polyaniline (PANi), pure magnetite (Fe3O4), and then PANi/ Fe3O4 nanocomposites were prepared and characterized. FT-IR spectra of the prepared samples indicate successful polymerization of PANi onto Fe3O4. PANi/Fe3O4 nanocomposites exhibit broad… read more here.
Keywords: fe3o4; pani; fe3o4 nanocomposites; fabrication characterization ... See more keywords