Bioinspired Liquid Crystalline Spinning Enables Scalable Fabrication of High‐Performing Fibrous Artificial Muscles
Sign Up to like & getrecommendations! Published in 2023 at "Advanced Materials"
DOI: 10.1002/adma.202211800
Abstract: Leveraging liquid crystal elastomers (LCEs) to realize scalable fabrication of high‐performing fibrous artificial muscles is of particular interest because these active soft materials can provide large, reversible, programmable deformations upon environmental stimuli. High‐performing fibrous LCEs… read more here.
Keywords: high performing; fabrication high; fibrous artificial; performing fibrous ... See more keywords
Controllable reduction of graphene oxide and its application during the fabrication of high dielectric constant composites
Sign Up to like & getrecommendations! Published in 2017 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2017.05.181
Abstract: Abstract The synthesis of reduced graphene oxide (RGO) with various reduction extents was carried out in organic solvent using 1,4-diiodobutane as the reducing agent at moderate temperatures. Results showed that the C/O ratio of RGO… read more here.
Keywords: graphene oxide; reduction; high dielectric; dielectric constant ... See more keywords
Novel fabrication of high-modulus cellulose-based films by nanofibrillation under alkaline conditions.
Sign Up to like & getrecommendations! Published in 2019 at "Carbohydrate polymers"
DOI: 10.1016/j.carbpol.2018.10.069
Abstract: We herein propose a novel continuous process for fabricating high-modulus films based on cellulose nanofibers. In place of a dissolution process, the pulps were mechanically disintegrated into nanofibers by ball-milling in an 8% NaOH solution.… read more here.
Keywords: novel fabrication; high modulus; modulus cellulose; cellulose based ... See more keywords
Fabrication of high-entropy perovskite oxide by reactive flash sintering
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.04.060
Abstract: Abstract In this study, powder mixtures at atomic ratios suitable for formation of Sr(Ti0.2Y0.2Zr0.2Sn0.2Hf0.2)O3-x were flash sintered at 1000 °C and 40 mA/mm2. X-ray diffraction and energy-dispersive spectroscopy analyses revealed the formation of single-phase oxides after sintering… read more here.
Keywords: flash; entropy perovskite; fabrication high; high entropy ... See more keywords
Fabrication of high electrostatic safety metastable Al/CuO nanocomposites doped with nitro-functionalized graphene with fast initiation ability and tunable reaction performance
Sign Up to like & getrecommendations! Published in 2021 at "Combustion and Flame"
DOI: 10.1016/j.combustflame.2021.111580
Abstract: Abstract Inspired by the crucial role of the carbon materials in tuning the reactivity of energetic materials, in this paper, nitrated graphene oxide (NGO) was endowed as an additive, and its catalytic effects on Al/CuO… read more here.
Keywords: performance; fabrication high; cuo nanocomposites; metastable cuo ... See more keywords
Fabrication of high quality factor cold sintered MgTiO3–NaCl microwave ceramic composites
Sign Up to like & getrecommendations! Published in 2020 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2020.123636
Abstract: Abstract Magnesium titanate is a well-known low loss dielectric ceramic, widely used in dielectric resonator and multilayer ceramic capacitor applications. But its high sintering temperature (1400°C) results in high energy consumption and thereby increases the… read more here.
Keywords: ceramic composites; high quality; factor cold; quality factor ... See more keywords
Fabrication of high-performance F and Al co-doped ZnO transparent conductive films for use in perovskite solar cells
Sign Up to like & getrecommendations! Published in 2019 at "Solar Energy Materials and Solar Cells"
DOI: 10.1016/j.solmat.2018.10.009
Abstract: Abstract Fluorine and aluminum co-doped ZnO (FAZO) films were deposited on glass substrates by RF magnetron sputtering. The effects of the substrate temperature ( T sub ) on the structural, morphological, electrical, and optical properties… read more here.
Keywords: solar cells; perovskite solar; cells fabrication; fabrication high ... See more keywords
Fabrication of High-Performance Visible-Blind Ultraviolet Photodetectors Using Electro-ionic Conducting Supramolecular Nanofibers.
Sign Up to like & getrecommendations! Published in 2023 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.3c00716
Abstract: The detection of ultraviolet (UV) light is vital for various applications, such as chemical-biological analysis, communications, astronomical studies, and also for its adverse effects on human health. Organic UV photodetectors are gaining much attention in… read more here.
Keywords: performance visible; supramolecular nanofibers; high performance; visible blind ... See more keywords
Fabrication of High Yield Photoluminescent Quantized Graphene Nanodiscs for Supercapacitor Devices
Sign Up to like & getrecommendations! Published in 2021 at "ACS Omega"
DOI: 10.1021/acsomega.1c02277
Abstract: In this work, we produced high yield quantized nitrogen-doped graphene nanodiscs from waste tires via a one-step process under high pressure and temperature using a homemade stainless steel reactor without using any chemical additives. Reaction… read more here.
Keywords: supercapacitor devices; high yield; graphene nanodiscs; fabrication high ... See more keywords
Synergetic Effect of a Surfactant on the Facile Fabrication and High Detectivity of an Inverted Organic Bulk Heterojunction Photodiode
Sign Up to like & getrecommendations! Published in 2017 at "ACS Photonics"
DOI: 10.1021/acsphotonics.7b00607
Abstract: A new photodiode fabrication strategy for organic photodiodes is proposed, involving the use of a small amount of cationic surfactant in a blend solution aiming at synergetic effects of facile device fabrication and high performances.… read more here.
Keywords: photodiode; ctab; fabrication; synergetic effect ... See more keywords
Fabrication and high ORR performance of MnOx nanopyramid layers with enriched oxygen vacancies.
Sign Up to like & getrecommendations! Published in 2018 at "Chemical communications"
DOI: 10.1039/c8cc04831b
Abstract: Manganese oxide nanopyramids (MONPMs) with enriched oxygen vacancies (OVs) are vertically grown on nitrogen doped carbon (NC) microlaminate arrays with narrow spacing, yielding a high performance for the oxygen reduction reaction (ORR). read more here.
Keywords: oxygen; oxygen vacancies; fabrication high; performance ... See more keywords