3D Printed Surgical Instruments: The Design and Fabrication Process
Sign Up to like & getrecommendations! Published in 2017 at "World Journal of Surgery"
DOI: 10.1007/s00268-017-3946-2
Abstract: We read with interest the novel article ‘‘3D Printed Surgical Instruments: The Design and Fabrication Process’’ by George et al. [1]. We congratulate the authors on their attempt to highlight the creative aspect of knife… read more here.
Keywords: design fabrication; process; surgical instruments; fabrication process ... See more keywords
Perovskite solar cells prepared under infrared irradiation during fabrication process in air ambience
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-020-03495-4
Abstract: Developing fabrication method without glove-box is essential to industrialize the revolutionary development of perovskite solar cell (PSC). In this paper, infrared irradiation during the fabrication process was studied for the preparation of perovskite absorber layer… read more here.
Keywords: perovskite solar; infrared irradiation; ambience; fabrication ... See more keywords
Micro-fabricated all optical pressure sensors
Sign Up to like & getrecommendations! Published in 2017 at "Microelectronic Engineering"
DOI: 10.1016/j.mee.2016.12.010
Abstract: Optical pressure sensors can operate in certain harsh application areas where the electrical pressure sensors cannot. However, the sensitivity is often not as good for the optical sensors. This work presents an all optical pressure… read more here.
Keywords: pressure sensors; fabrication process; sensor; optical pressure ... See more keywords
Breakthrough in Large Area Photoanode Fabrication Process: High Concentration Precursor Solution with Solvent Mix and One Step Spin Coating for High PEC performance of BiVO4
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Materials Chemistry A"
DOI: 10.1039/d4ta03349c
Abstract: Advancements in the efficiency of hydrogen production via photoelectrochemical water splitting have led to a focus on scalability, ease of fabrication, and cost-effectiveness. Yet, challenges such as prolonged processing times... read more here.
Keywords: large area; area photoanode; fabrication; photoanode fabrication ... See more keywords
An on-demand bench-top fabrication process for fluidic chips based on cross-diffusion through photopolymerization.
Sign Up to like & getrecommendations! Published in 2020 at "Biomicrofluidics"
DOI: 10.1063/5.0014956
Abstract: In this paper, we propose a novel approach to fabricate fluidic chips. The method utilizes molecular cross-diffusion, induced by photopolymerization under ultraviolet (UV) irradiation in a channel pattern, to form the channel structures. During channel… read more here.
Keywords: fluidic chips; photopolymerization; cross diffusion; fabrication process ... See more keywords
Effect of sintering parameters (time and temperature) upon the fabrication process of organic binder-based metallic hollow sphere
Sign Up to like & getrecommendations! Published in 2017 at "Powder Metallurgy"
DOI: 10.1080/00325899.2017.1355424
Abstract: ABSTRACT Metallic hollow spheres (MHSs) are developed to be used in structural applications in syntactic and metal foams. These foams are lightweight and energy-absorbing structures which also can be used for acoustic insulation. In this… read more here.
Keywords: metallic hollow; organic binder; fabrication process;
Self-aligned fabrication process for active membrane in magnetically driven micropump using photosensitive composite
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Micromechanics and Microengineering"
DOI: 10.1088/1361-6439/ab6302
Abstract: In this paper, we propose a simple fabrication process for an active membrane utilised in the manufacture of micropumps using a photosensitive composite. The composite is developed from a mixture of a negative photoresist (SU-8)… read more here.
Keywords: process active; process; fabrication process; micropump ... See more keywords
An SOI-based post-fabrication process for compliant MEMS devices
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Micromechanics and Microengineering"
DOI: 10.1088/1361-6439/ad2f4b
Abstract: Fabricating compliant microelectromechanical system (MEMS) devices is challenging because they are easily damaged during fabrication. This paper presents a fabrication process based on the silicon-on-insulator (SOI) wafer for compliant MEMS devices. In the fabrication process,… read more here.
Keywords: mems devices; fabrication; soi based; compliant mems ... See more keywords
Optimization of MWCNTs/Al nanocomposite fabrication process parameters for mass density and hardness
Sign Up to like & getrecommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science"
DOI: 10.1177/09544062221084204
Abstract: Engineering materials and their development are essential for a civilized society, and they have always played a key role in the industrialization of a country. The performance of materials can be increased by selecting appropriate… read more here.
Keywords: mass density; fabrication; grey relational; fabrication process ... See more keywords
Simultaneous optimization of conductive layer, dielectric layer, and fabrication process for optically transparent low-loss frequency selective surfaces.
Sign Up to like & getrecommendations! Published in 2024 at "Optics express"
DOI: 10.1364/oe.535121
Abstract: This work presents a design approach for optically transparent low-loss frequency selective surfaces (FSSs) based on the simultaneous optimization of a conductive layer, dielectric layer, and fabrication process. Three bandpass FSSs working in millimeter-wave bands… read more here.
Keywords: layer; loss; optically transparent; fabrication process ... See more keywords