Fabrication and Properties of γ-TiAl Sheet Materials: A Review
Sign Up to like & getrecommendations! Published in 2017 at "JOM"
DOI: 10.1007/s11837-017-2551-z
Abstract: Abstractγ-TiAl alloys have attractive properties such as low density, high creep resistance, high modulus, good oxidation and burn resistance. The main concern for the fabrication and use of TiAl alloys is the low deformability at… read more here.
Keywords: sheet materials; tial sheet; fabrication; fabrication properties ... See more keywords
Fabrication and properties of porous AlPO4 ceramics from solid-state synthesized powders using Al(OH)3 and ammonium phosphate as raw materials
Sign Up to like & getrecommendations! Published in 2018 at "Journal of the Australian Ceramic Society"
DOI: 10.1007/s41779-018-0268-2
Abstract: Porous aluminum phosphate (AlPO4) ceramics was fabricated from various powders synthesized at 800 °C, 900 °C, 1000 °C, and 1100 °C, respectively, using Al(OH)3 and (NH4)3PO4·3H2O as starting materials. Effects of the synthesis temperatures and CaSO4 addition on properties… read more here.
Keywords: properties porous; porous alpo4; fabrication properties; synthesis temperatures ... See more keywords
Fabrication and properties of Sialon ceramics obtained by using a DMAA/MBAM gel system
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.01.197
Abstract: Abstract Hydrolyzed AlN in traditional raw materials is not suitable for aqueous gel casting using DMAA (N,N-dimethylacrylamide) gelling agents. Therefore, a new hydrolysis-resistant AlCN was studied to replace hydrolyzed AlN. By adding the low toxicity… read more here.
Keywords: properties sialon; dmaa mbam; sialon ceramics; fabrication properties ... See more keywords
Fabrication and properties of Z-type Sr3Co2−Zn Fe24O41 hexaferrites and their composites with epoxy
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Magnetism and Magnetic Materials"
DOI: 10.1016/j.jmmm.2019.165628
Abstract: Abstract Zn-substituted Z-type Sr hexaferrites (Sr3Co2−xZnxFe24O41, x = 0, 0.5, 1.0, 1.5) were prepared by solid-state reaction routes. The magnetic and high-frequency properties of the sintered bodies and powder–epoxy composites were studied. Almost-single-phase Z-type hexaferrite could be… read more here.
Keywords: properties type; sr3co2 fe24o41; fe24o41 hexaferrites; fabrication properties ... See more keywords
Fabrication and properties of porous anorthite ceramics with modelling pore structure
Sign Up to like & getrecommendations! Published in 2017 at "Materials Letters"
DOI: 10.1016/j.matlet.2016.12.131
Abstract: Abstract A single-phased anorthite porous ceramics was fabricated by foam-gelcasting technique using α-Al2O3, CaCO3 and SiO2 as starting material. Through adjusting foaming agent concentration and solid content in the slurry, tailored porosity (62–91%), pore size… read more here.
Keywords: properties porous; ceramics modelling; porous anorthite; fabrication properties ... See more keywords
Fabrication and properties of waterborne thermoplastic polyurethane nanocomposite enhanced by the POSS with low dielectric constants
Sign Up to like & getrecommendations! Published in 2020 at "Polymer"
DOI: 10.1016/j.polymer.2020.122992
Abstract: Abstract Polyhedral oligomeric silsesquioxane (POSS) functionalized with an amine group was designed and prepared. Then it was applied as a physical cross-linker to prepare waterborne thermoplastic polyurethane (WTPU)/POSS nanocomposite. Results revealed that the POSS had… read more here.
Keywords: waterborne thermoplastic; properties waterborne; fabrication properties; low dielectric ... See more keywords
Fabrication and properties characterization of BaSi2 thin-films thermally-evaporated on Ge (100) modified substrates
Sign Up to like & getrecommendations! Published in 2018 at "Thin Solid Films"
DOI: 10.1016/j.tsf.2018.08.004
Abstract: Abstract The fabrication of orthorhombic barium disilicide (BaSi2) thin-films on modified germanium (Ge) substrates by thermal evaporation method was demonstrated, in which the surface modification of Ge substrate was performed by a simple chemical etching… read more here.
Keywords: thin films; basi2 thin; fabrication properties; crystalline quality ... See more keywords
Organic and inorganic nanomaterials: fabrication, properties and applications
Sign Up to like & getrecommendations! Published in 2023 at "RSC Advances"
DOI: 10.1039/d3ra01421e
Abstract: Nanomaterials and nanoparticles are a burgeoning field of research and a rapidly expanding technology sector in a wide variety of application domains. Nanomaterials have made exponential progress due to their numerous uses in a variety… read more here.
Keywords: nanomaterials fabrication; fabrication properties; variety; properties applications ... See more keywords
Fabrication and properties of a Tm3+ doped TbVO4 magneto-optical crystal
Sign Up to like & getrecommendations! Published in 2024 at "CrystEngComm"
DOI: 10.1039/d4ce00054d
Abstract: The Verdet constants of the TTV crystal at 532, 633 and 1064 nm are 50–250% higher than those of the TGG crystal. read more here.
Keywords: properties tm3; magneto optical; tbvo4 magneto; doped tbvo4 ... See more keywords
Emerging flexible heterojunctions: fabrication, properties and optoelectronic applications
Sign Up to like & getrecommendations! Published in 2025 at "Chemical Science"
DOI: 10.1039/d5sc05791d
Abstract: Flexible heterojunctions have attracted increasing attention in recent years due to their multifunctionality and exceptional advantages for optoelectronic applications, such as mechanical compliance, dimensional freedom and strain tunability. With the rapid development of flexible heterojunctions,… read more here.
Keywords: optoelectronic applications; flexible heterojunctions; emerging flexible; heterojunctions fabrication ... See more keywords
Fabrication and properties of SiO2f/SiO2 composite ceramic based on stereolithography technology
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Asian Ceramic Societies"
DOI: 10.1080/21870764.2024.2324526
Abstract: ABSTRACT During the light curing process, the high transmittance of fused quartz leads to overcuring of the paste, thereby affecting its forming precision. To address this issue, aniline black dye was incorporated into the SiO2f/SiO2… read more here.
Keywords: temperature; sio2f sio2; properties sio2f; composite ceramic ... See more keywords