Fatigue Behavior of Additively Manufactured IN718 with Columnar Grains
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202001031
Abstract: Fatigue failure of polycrystalline materials is often dominated by crack initiation processes, which are strongly influenced by salient features existing in the microstructure. Herein, a crystal plasticity framework based on the finite element method is… read more here.
Keywords: fatigue behavior; crack nucleation; columnar; fatigue crack ... See more keywords
Fatigue behavior of removable partial denture cast and laser‐sintered cobalt‐chromium (CoCr) and polyetheretherketone (PEEK) clasp materials
Sign Up to like & getrecommendations! Published in 2022 at "Clinical and Experimental Dental Research"
DOI: 10.1002/cre2.645
Abstract: To investigate the fatigue behavior of cast and laser‐sintered cobalt‐chromium (CoCr) and polyetheretherketone (PEEK) material for a removable partial denture (RPD) clasps. read more here.
Keywords: cobalt chromium; cast laser; chromium cocr; laser sintered ... See more keywords
Effect of Cooling Condition on Fatigue Behavior of the Forged EA4T Steel
Sign Up to like & getrecommendations! Published in 2020 at "steel research international"
DOI: 10.1002/srin.202000167
Abstract: Hot‐forged EA4T steel is fabricated under the air, stack, and sand cooling conditions. Laser scanning confocal microscopy is used to analyze the microstructure. Mechanical properties and fatigue behavior are evaluated. A fatigue fracture appearance is… read more here.
Keywords: fatigue behavior; cooling condition; microscopy; steel ... See more keywords
Numerical Analysis of Fatigue Behavior of ITER-Like Monoblock Divertor Interlayer Under Coupled Heat Loads
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Fusion Energy"
DOI: 10.1007/s10894-018-0164-3
Abstract: High-confinement mode is a very prominent operation style for future fusion device due to its unique advantages. However, the conjuncted edge localized modes (ELMs) are very difficult to control so that divertor plates are very… read more here.
Keywords: fatigue behavior; monoblock divertor; interlayer; heat ... See more keywords
Influence of Severe Shot Peening on the Surface State and Ultra-High-Cycle Fatigue Behavior of an AW 7075 Aluminum Alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2692-9
Abstract: The ever more pressing and concurrent requirements of light design, increased performances and reliability, energy savings together with acceptable costs, is always pushing researchers and engineers toward the definition and application of new materials and… read more here.
Keywords: shot peening; treatment; surface; fatigue behavior ... See more keywords
Out-of-Phase Thermomechanical Fatigue Behavior of a NiCrAlYSi-Coated Superalloy
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04195-9
Abstract: Arc ion plating was employed on a directionally solidified nickel-based superalloy to deposit a NiCrAlYSi coating. The failure behavior of the coated cylindrically specimens under thermomechanical fatigue loadings was experimentally investigated. The results show that… read more here.
Keywords: phase thermomechanical; fatigue behavior; thermomechanical fatigue; behavior ... See more keywords
High-Cycle Fatigue Behavior of a Self-tapping Timber Screw Under Axial Tensile Loading
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Failure Analysis and Prevention"
DOI: 10.1007/s11668-020-00863-4
Abstract: The high-cycle fatigue behavior of a self-tapping timber screw is examined for axial tensile loading with R = 0.1. Based on 71 fatigue tests in the finite-life and long-life regime, Wöhler curves are derived for the… read more here.
Keywords: self tapping; fatigue; fatigue behavior; behavior self ... See more keywords
Modal identification and fatigue behavior of Eynel steel arch highway bridge with calibrated models
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Civil Structural Health Monitoring"
DOI: 10.1007/s13349-021-00512-w
Abstract: In this paper, modal parameters of the Eynel steel arch highway bridge are identified and the fatigue behavior of the bridge is investigated. Modal parameters were extracted from three ambient vibration tests carried out over… read more here.
Keywords: bridge; fatigue behavior; eynel steel; arch highway ... See more keywords
The Intrinsic Relationship Between Microstructure Evolution and Thermal Fatigue Behavior of a Single-Crystal Cobalt-Base Superalloy
Sign Up to like & getrecommendations! Published in 2017 at "Acta Metallurgica Sinica (English Letters)"
DOI: 10.1007/s40195-017-0646-8
Abstract: Abstract The intrinsic relationship between the microstructure evolution and thermal fatigue behavior of a single-crystal cobalt-base superalloy has been investigated. The thermal fatigue tests are performed cyclically between room temperature and 1050 °C using V-notch plate… read more here.
Keywords: intrinsic relationship; treatment; fatigue; fatigue behavior ... See more keywords
Experimental and artificial neural network ANN investigation of bending fatigue behavior of glass fiber/polyester composite shafts
Sign Up to like & getrecommendations! Published in 2018 at "Journal of the Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-018-1098-4
Abstract: This study includes an experimental investigation for rotating bending fatigue in five types of composite material shaft with comparison to a standard type made of pure polyester material. In addition, an artificial neural network ANN… read more here.
Keywords: type; glass; bending fatigue; fatigue behavior ... See more keywords
Design and Evaluation of an Experimental Technique for Mechanical and Fatigue Testing of Sub-Sized Samples
Sign Up to like & getrecommendations! Published in 2017 at "Experimental Techniques"
DOI: 10.1007/s40799-017-0229-7
Abstract: Some recently developed processing techniques allow fabrication of small specimens. The fatigue behavior of these small samples cannot be characterised according to the existing standards due to size limitations. The main objective of the present… read more here.
Keywords: technique mechanical; fatigue; mechanical fatigue; fatigue testing ... See more keywords