Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201600721
Abstract: A three dimensional simulation of short fatigue crack propagation in a polycrystalline microstructure using a crystal plasticity finite element model is carried out. The experimental microstructure which contains several hundreds grains, was obtained via diffraction…
read more here.
Keywords:
short fatigue;
fatigue crack;
crack;
simulation short ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202001031
Abstract: Fatigue failure of polycrystalline materials is often dominated by crack initiation processes, which are strongly influenced by salient features existing in the microstructure. Herein, a crystal plasticity framework based on the finite element method is…
read more here.
Keywords:
fatigue behavior;
crack nucleation;
columnar;
fatigue crack ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Archive of Applied Mechanics"
DOI: 10.1007/s00419-020-01821-0
Abstract: Within this work, we utilize the framework of phase field modeling for fracture in order to handle a very crucial issue in terms of designing technical structures, namely the phenomenon of fatigue crack growth. So…
read more here.
Keywords:
fatigue crack;
field;
phase field;
load ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "International Journal of Fracture"
DOI: 10.1007/s10704-018-00340-y
Abstract: In this paper, an in-situ experiment is performed under the optical microscopy to investigate the continuous variation of the strain field in the vicinity of the fatigue crack tip in Al2024-T3. The specimen is a…
read more here.
Keywords:
fatigue crack;
variation;
microscopy;
crack tip ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2021 at "International Journal of Fracture"
DOI: 10.1007/s10704-021-00588-x
Abstract: A key problem in fatigue crack growth is the influence of load transients, such as overloads, on crack growth rates. This has been investigated in detail for materials operating near room temperature but is less…
read more here.
Keywords:
fatigue crack;
high temperature;
crack growth;
crack ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Materials Science"
DOI: 10.1007/s11003-017-0090-y
Abstract: We present experimental results on the fatigue crack growth in specimens with rectangular cross sections made of 2017A-T4 aluminum alloy under bending. The specimens were weakened by sharp and blunt one-sided notches (for the notch…
read more here.
Keywords:
fatigue crack;
influence notch;
alloy;
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2756-x
Abstract: AbstractIn the present work, the fatigue crack growth (FCG) behavior of a new type of 10% Cr martensitic steel welded joints with Ni-based weld metal was comparatively studied for different regions including base metal (BM),…
read more here.
Keywords:
fatigue crack;
welded joints;
crack growth;
crack ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3764-1
Abstract: A new method of nanohardness distribution for investigating the hydrogen effect on the fatigue crack in austenitic stainless steels was developed. The nanohardness distribution around the fatigue crack tip is dependent on the plastic zone…
read more here.
Keywords:
fatigue crack;
hydrogen;
effect fatigue;
nanohardness distribution ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-04739-4
Abstract: Friction stir welding (FSW) and gas tungsten arc welding (GTAW) were employed to manufacture the spiral pipes by a double-sided synchronization approach. The fatigue crack growth properties for base metal (BM) and welded metal (WM)…
read more here.
Keywords:
fatigue crack;
friction stir;
crack;
stir welding ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Failure Analysis and Prevention"
DOI: 10.1007/s11668-019-00646-6
Abstract: Nanoindentation measurements are carried out in the fatigue plastic zone in the 2024 T351 alloy. It is shown that variations in hardness, plastic work and plasticity index show typical evolution permitting the identification of cyclic…
read more here.
Keywords:
plastic;
fatigue crack;
crack tip;
zones fatigue ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2018 at "Journal of Central South University"
DOI: 10.1007/s11771-018-3797-5
Abstract: Al–Zn–Mg–Sc–Zr alloy samples were annealed to four different states (under-aging, peak-aging, over-aging and double-aging) and then thoroughly investigated by means of electron backscatter diffraction (EBSD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), tensile and…
read more here.
Keywords:
fatigue crack;
microscopy;
crack growth;
crack ... See more keywords