Sign Up to like & get
recommendations!
1
Published in 2018 at "Iet Power Electronics"
DOI: 10.1049/iet-pel.2017.0883
Abstract: This article presents an alternative finite control set model predictive control (FCS-MPC) implementation to reduce the input current ripple of a two-level three-phase grid-connected rectifier. With the proposed approach, an improvement in the input current…
read more here.
Keywords:
voltage;
mpc;
grid connected;
fcs mpc ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "IEEE Access"
DOI: 10.1109/access.2022.3227211
Abstract: Conventional finite control set model predictive control (FCS-MPC) outputs one voltage vector per period by vector traversal algorithm, which leads to low control accuracy, unnecessary high computational burden and unfixed switching frequency. In this paper,…
read more here.
Keywords:
fcs mpc;
vector;
sector optimization;
vector expansion ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2025 at "IEEE Access"
DOI: 10.1109/access.2025.3578259
Abstract: This article presents an improvement to the Model Predictive Control-Finite Control Set (MPC-FCS) applied to grid-connected Doubly-Fed Induction Generators (DFIG) for operation under distorted voltage conditions. The MPC-FCS controller uses the discrete system model to…
read more here.
Keywords:
fcs mpc;
mpc fcs;
voltage;
mpc ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2018 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2017.2740819
Abstract: This paper applies finite control set model predictive control (FCS-MPC) for dynamic reactive power compensation using a hybrid active power filter (HAPF). The FCS-MPC uses a model based on LCL-filter equations to predict the system…
read more here.
Keywords:
control set;
finite control;
control;
power ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2018 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2017.2777385
Abstract: One of the main drawbacks with the use of finite control set model predictive control (FCS-MPC) in power converters is the variable switching frequency. When not taken into consideration, it can vary randomly depending mainly…
read more here.
Keywords:
switching frequency;
control;
fcs mpc;
Sign Up to like & get
recommendations!
1
Published in 2022 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2021.3063867
Abstract: Aging and temperature changes in the passive components of an LCL-filter grid connected converter system (GCCs) may lead to parameter uncertainties, which can in turn influence its modeling accuracy for finite-control-set model predictive control (FCS-MPC).…
read more here.
Keywords:
grid connected;
fcs mpc;
parameter;
control ... See more keywords
Sign Up to like & get
recommendations!
2
Published in 2022 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2021.3104600
Abstract: Finite control set model predictive control (FCS-MPC) strategies for power conversion devices benefit from extending the prediction horizon length. Solving this problem relies on the definition of the underlying integer least-squares problem. Sphere decoding algorithm…
read more here.
Keywords:
sda;
fcs mpc;
prediction horizon;
Sign Up to like & get
recommendations!
0
Published in 2024 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2023.3294536
Abstract: Conventional finite control set model predictive control (FCS-MPC) for three-phase three-level (3P-3L) converters suffers from cumbersome weighting factor design, variable switching frequency, and performance compromise in neutral point potential (NPP) and current. This article proposes…
read more here.
Keywords:
fcs mpc;
npp deviation;
zero sequence;
sequence component ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2024 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2023.3308133
Abstract: Multiphase machines are increasingly used in research and industry applications due to their inherent advantages. Stator current control is a common strategy for this type of systems. The most important issue it must face is…
read more here.
Keywords:
fcs mpc;
multiphase;
control;
multiphase drives ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2025 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2024.3515281
Abstract: This article proposes an improved finite control set model predictive control strategy to suppress the dual pulsations of torque and current of three-phase switched reluctance motors. It enhances delay compensation to strengthen predictive capabilities and…
read more here.
Keywords:
fcs mpc;
switched reluctance;
mpc improved;
torque current ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2025 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2025.3536555
Abstract: Conventional long-horizon finite-control-set model predictive control (FCS-MPC) for power electronics has two main real-time implementation problems: 1) calculation burden and latency; and 2) high hardware resource requirements on real-time platforms such as FPGA. To solve…
read more here.
Keywords:
fcs mpc;
converter;
control;
model ... See more keywords