Effect of Abrasive Feed Rate on Rock Cutting Performance of Abrasive Waterjet
Sign Up to like & getrecommendations! Published in 2019 at "Rock Mechanics and Rock Engineering"
DOI: 10.1007/s00603-019-01784-x
Abstract: Rock cutting with an abrasive waterjet system has been attempted in mining and construction fields. In abrasive waterjet cutting, the overall operating cost depends on the cost of the consumed abrasive. For this reason, it… read more here.
Keywords: rock cutting; rate; feed rate; water ... See more keywords
Electrospun TiO2 nanofibers for metal free indoline dye sensitized solar cells
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-01616-2
Abstract: In this study, TiO2 nanofibers (NFs) have been synthesized by a simple and cost-effective electrospinning method. The diameter of TiO2 NFs has been controlled by varying the feed rate from 0.5 to 1.5 ml h−1.… read more here.
Keywords: tio2; tio2 nfs; feed rate; electrospun tio2 ... See more keywords
Barium Titanate Dielectrics Sprayed by a High Feed-Rate Water-Stabilized Plasma Torch
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3622-1
Abstract: Barium titanate coatings were first time sprayed by a high feed-rate plasma torch with water stabilization. Two power levels of the torch were applied. Two substrate materials were used—stainless steel and carbon steel. Various substrate… read more here.
Keywords: barium titanate; sprayed high; high feed; feed rate ... See more keywords
The influence of variable feed rate on bushing and surface roughness in friction drilling
Sign Up to like & getrecommendations! Published in 2019 at "Journal of the Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-019-1812-x
Abstract: In this study AISI 1010 square-section material was drilled on CNC milling machine using friction drilling processes in two different patterns, namely constant feed rate and variable feed rate. In both drilling processes the tool–workpiece… read more here.
Keywords: variable feed; rate; feed rate; drilling processes ... See more keywords
Numerical model establishment and verification of cold pilgering on cycle feed rate
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Iron and Steel Research International"
DOI: 10.1007/s42243-018-0052-0
Abstract: A numerical model was established to calculate the cycle feed rate through studying the case of a cold pilger mill with the 304 stainless steel pipe. Firstly, the precise constitutive equation of 304 stainless steel… read more here.
Keywords: cycle feed; model; feed rate;
Hausmannite Manganese oxide cathodes for supercapacitors: Surface Wettability and Electrochemical Properties
Sign Up to like & getrecommendations! Published in 2017 at "Electrochimica Acta"
DOI: 10.1016/j.electacta.2017.01.165
Abstract: Abstract Mn 3 O 4 thick film electrodes have been synthesized by spray pyrolysis method. Effect of its two important synthesis parameters viz. solution feed rate and substrate temperature has been studied. Solution feed rate… read more here.
Keywords: substrate temperature; feed rate; solution feed;
Fracture and fatigue life of Al-based MMCs machined at different conditions
Sign Up to like & getrecommendations! Published in 2018 at "Engineering Fracture Mechanics"
DOI: 10.1016/j.engfracmech.2018.01.013
Abstract: Abstract This study investigates fracture and fatigue performance of metal matric composites (MMCs) without any reinforcement and, 0.7 and 13 µm particle (10 vol%) reinforced which were machined at different feeds and speeds. Fractured surface as well… read more here.
Keywords: fatigue life; feed rate; life based; fracture fatigue ... See more keywords
A review of control strategies for manipulating the feed rate in fed-batch fermentation processes.
Sign Up to like & getrecommendations! Published in 2017 at "Journal of biotechnology"
DOI: 10.1016/j.jbiotec.2017.01.008
Abstract: A majority of industrial fermentation processes are operated in fed-batch mode. In this case, the rate of feed addition to the system is a focus for optimising the process operation, as it directly impacts metabolic… read more here.
Keywords: fermentation processes; control; feed rate; rate ... See more keywords
Effect of filler metal feed rate and composition on microstructure and mechanical properties of fibre laser welded AA 2024-T3
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2016.10.006
Abstract: Abstract The influence of aluminium alloy 4043 filler wire feed rate on the weld quality and mechanical properties of high power 5 kW fibre laser welded aluminium alloy 2024-T3 was investigated. Loss of volatile alloying elements… read more here.
Keywords: fibre laser; feed rate; mechanical properties; filler ... See more keywords
3D chatter stability of high-speed micromilling by considering nonlinear cutting coefficients, and process damping
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2020.07.016
Abstract: Abstract High-speed micromilling can be used to fabricate 3D complex miniature components. The regenerative chatter, which is closely related to machining geometric accuracy, surface quality and tool wear, is a very important topic in micromachining… read more here.
Keywords: cutting coefficients; feed rate; speed micromilling; stability ... See more keywords
Investigation of thrust force in drilling polyphthalamide (PPA) composites
Sign Up to like & getrecommendations! Published in 2021 at "Measurement"
DOI: 10.1016/j.measurement.2021.109505
Abstract: Abstract In this study, the drilling process is explored on 30% glass fiber reinforced PPA composite to investigate the influence of drilling parameters on thrust force. HSS, TiN coated HSS and carbide twist drills with… read more here.
Keywords: investigation thrust; force; ppa; thrust force ... See more keywords