Surface and build‐up dose comparison between Elekta 6 MV flattening filter and flattening‐filter‐free beams using an advanced Markus ionization chamber and a solid water‐equivalent phantom
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Applied Clinical Medical Physics"
DOI: 10.1002/acm2.13094
Abstract: Abstract Using a plane‐parallel advanced Markus ionization chamber and a stack of water‐equivalent solid phantom blocks, percentage surface and build‐up doses of Elekta 6 MV flattening filter (FF) and flattening‐filter‐free (FFF) beams were measured as… read more here.
Keywords: advanced markus; phantom; flattening filter; fff ... See more keywords
Field flow fractionation techniques to explore the “nano-world”
Sign Up to like & getrecommendations! Published in 2017 at "Analytical and Bioanalytical Chemistry"
DOI: 10.1007/s00216-017-0180-6
Abstract: Field flow fractionation (FFF) techniques are used to successfully characterize several nanomaterials by sizing nano-entities and producing information about the aggregation/agglomeration state of nanoparticles. By coupling FFF techniques to specific detectors, researchers can determine particle-size… read more here.
Keywords: fff; fff techniques; field flow; flow fractionation ... See more keywords
Novel Technique Based on Fused Filament Fabrication (FFF) and Robocasting to Create Composite Medical Parts
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Medical Systems"
DOI: 10.1007/s10916-019-1246-0
Abstract: The purpose for this study is to obtain a new composite manufacturing system based on Additive Manufacturing techniques that allows the creation of parts for the medical industry. These pieces will be resistant, lightweight and… read more here.
Keywords: technique; fused filament; fff; manufacturing ... See more keywords
Mass-Customization of Oral Tablets via the Combination of 3D Printing and Injection Molding.
Sign Up to like & getrecommendations! Published in 2019 at "International journal of pharmaceutics"
DOI: 10.1016/j.ijpharm.2019.118611
Abstract: The new frontier of medicine is the personalization of treatment to match a patient's individual needs. Fused-filament fabrication (FFF) offers a platform for the personalization of drug dosage forms, but one of its chief shortcomings… read more here.
Keywords: customization; medicine; layer; mass customization ... See more keywords
Impact of feeding microalgae (Aurantiochytrium limacinum) and co-extruded mixture of full-fat flaxseed as sources of n-3 fatty acids to ISA brown and Shaver white breeders and progeny on pullet skeletal attributes at hatch through to 18 weeks of age1
Sign Up to like & getrecommendations! Published in 2020 at "Poultry Science"
DOI: 10.1016/j.psj.2019.12.016
Abstract: Impact of feeding n-3 fatty acids (FA) to ISA brown and Shaver white breeders and their progeny on bone development in pullets was investigated. Breeders were fed Control (CON); CON + 1% microalgae (DMA: Aurantiochytrium… read more here.
Keywords: dma; con; impact; fff ... See more keywords
Assessment of Organ Dose Reduction Using Dynamic Conformal Arc and Static Field with FFF Beams for SBRT in Lung Cancer
Sign Up to like & getrecommendations! Published in 2022 at "Cancer Investigation"
DOI: 10.1080/07357907.2022.2103705
Abstract: Abstract Background The aim of this study is to compare the dose delivered to the organs at risk (OAR), using static beams (SF) and a dynamic conformational arc (DCA) with flattening filter free (FFF) beams,… read more here.
Keywords: lung cancer; fff beams; fff; spinal cord ... See more keywords
Parent BMI Increase 2 to 5 Years Post-study Related to Change in Age but Independent of Other Sociodemographics, Health Behavior, and Study Engagement (P16-001-19).
Sign Up to like & getrecommendations! Published in 2019 at "Current developments in nutrition"
DOI: 10.1093/cdn/nzz050.p16-001-19
Abstract: Objectives Characterize parent (P) weight change 2-5 y post participation in Fuel for Fun (FFF) a controlled trial of a school and family intervention focused on culinary and physical activity experiences for 4th grade youth.… read more here.
Keywords: change; post study; years post; activity ... See more keywords
The Effect of Annealing on Additive Manufactured ULTEM™ 9085 Mechanical Properties
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14112907
Abstract: Fused filament fabrication (FFF) is increasingly adopted for direct manufacturing of end use parts in an aviation industry. However, the application of FFF technique is still restricted to manufacturing low criticality lightly loaded parts, due… read more here.
Keywords: ultem 9085; fff; process; mechanical properties ... See more keywords
Fabrication of PLA/PCL/Graphene Nanoplatelet (GNP) Electrically Conductive Circuit Using the Fused Filament Fabrication (FFF) 3D Printing Technique
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15030762
Abstract: For the purpose of fabricating electrically conductive composites via the fused filament fabrication (FFF) technique whose properties were compared with injection-moulded properties, poly(lactic acid) (PLA) and polycaprolactone (PCL) were mixed with different contents of graphene… read more here.
Keywords: fabrication; electrically conductive; graphene; fff ... See more keywords
3D PEEK Objects Fabricated by Fused Filament Fabrication (FFF)
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15030898
Abstract: PEEK (poly ether ether ketone) materials printed using FFF 3D printing have been actively studied on applying electronic devices in satellites owing to their excellent light weight and thermal resistance. However, the PEEK FFF process… read more here.
Keywords: fff; peek objects; printed line; reliability ... See more keywords
Fused Filament Fabrication (FFF) for Manufacturing of Microfluidic Micromixers: An Experimental Study on the Effect of Process Variables in Printed Microfluidic Micromixers
Sign Up to like & getrecommendations! Published in 2021 at "Micromachines"
DOI: 10.3390/mi12080858
Abstract: The need for accessible and inexpensive microfluidic devices requires new manufacturing methods and materials as a replacement for traditional soft lithography and polydimethylsiloxane (PDMS). Recently, with the advent of modern additive manufacturing (AM) techniques, 3D… read more here.
Keywords: fused filament; fff; process; microfluidic micromixers ... See more keywords