Effect of Thermal Cycling and Aging on Heated Fiber Metal Laminates and Glass‐Fiber Epoxy Composites
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201800084
Abstract: By integrating heater elements in Fiber Metal Laminates, such as GLARE, the material has a promising potential as de- or anti-icing system in aircraft structures. Application of this so called "heated GLARE" material will however… read more here.
Keywords: effect; thermal cycling; fiber epoxy; glass fiber ... See more keywords
Enhancement of interlaminar fracture toughness of carbon fiber–epoxy composites using polyamide‐6,6 electrospun nanofibers
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.45244
Abstract: In this study, carbon fiber–epoxy composites are interleaved with electrospun polyamide-6,6 (PA 66) nanofibers to improve their Mode-I fracture toughness. These nanofibers are directly deposited onto carbon fabrics before composite manufacturing via vacuum infusion. Three-point… read more here.
Keywords: electrospun nanofibers; carbon fiber; carbon; fiber epoxy ... See more keywords
Mechanical Properties of Carbon Fiber/Epoxy Resin Modified by Functionalized Silicone Polymer/Graphene Oxide
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.57195
Abstract: Carbon fiber/epoxy resin (CF/EP) composites exhibit low interlaminar fracture toughness perpendicular to the fibers, making them susceptible to interlaminar delamination, which significantly impacts the load‐bearing capacity and lifespan of the composites. Here, a silicon polymer… read more here.
Keywords: carbon fiber; fiber epoxy; epoxy resin;
Mechanical improvement of carbon fiber/epoxy composites by sizing functionalized carbon nanotubes on fibers
Sign Up to like & getrecommendations! Published in 2024 at "Polymer Composites"
DOI: 10.1002/pc.28497
Abstract: A sizing agent mainly consisting of polyethersulfone and acidified multi‐walled carbon nanotubes (MWCNT) was developed for surface modification of carbon fibers (CF) to enhance the interfacial bond and to form carbon fiber‐carbon nanotube (CF‐MWCNT) multiscale… read more here.
Keywords: carbon fiber; carbon; surface; fiber epoxy ... See more keywords
Effect of hybrid sizings on the surface morphology, mechanical behavior of basalt fibers, and fiber/epoxy composite properties
Sign Up to like & getrecommendations! Published in 2024 at "Polymer Composites"
DOI: 10.1002/pc.29075
Abstract: In the present study, the basalt fibers (BFs) were treated with hybrid sizings consisting silane coupling agent (3‐Glycidoxypropyl)trimethoxysilane, and silicon dioxide nanoparticles (SNPs). Using acetone washing and heat treatment, the commercial sizing previously on the… read more here.
Keywords: hybrid sizings; effect hybrid; surface morphology; fiber epoxy ... See more keywords
Effective interlaminar toughening of carbon fiber/epoxy composite laminates by extremely low loadings of monolayer graphene oxide
Sign Up to like & getrecommendations! Published in 2024 at "Polymer Composites"
DOI: 10.1002/pc.29173
Abstract: An interlaminar ultrafine spraying method was proposed for monolayer graphene oxide (GO) modified CFRP nanocomposite laminates. The well‐dispersed monolayer GO nano‐solutions were prepared by multi‐level dispersion and then sprayed on carbon fiber/epoxy prepreg by the… read more here.
Keywords: monolayer graphene; carbon fiber; graphene oxide; fiber epoxy ... See more keywords
Effect of O‐C3N4 on the mechanical properties of glass fiber/epoxy resin composites
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.29736
Abstract: The interfacial bonding between fiber and matrix is very important for the mechanical properties of composites. This effort involved oxidizing C3N4 to produce O‐C3N4, which was employed to improve the mechanical and thermal properties of… read more here.
Keywords: mechanical properties; glass fiber; properties glass; fiber epoxy ... See more keywords
Carbon fiber/epoxy composites: effect of zinc sulphide coated carbon nanotube on thermal and mechanical properties
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Bulletin"
DOI: 10.1007/s00289-017-2115-y
Abstract: In this study, composites based on carbon fiber and a modified epoxy resin were obtained. The modification on the polymeric matrix was performed by adding functionalized multi-walled carbon nanotubes coated with zinc sulphide particles (MWCNT-ZnS),… read more here.
Keywords: carbon fiber; carbon; zinc sulphide; fiber epoxy ... See more keywords
Assessment of F-III and F-12 aramid fiber/epoxy interfacial adhesions based on fiber bundle specimens
Sign Up to like & getrecommendations! Published in 2018 at "Composites Part A: Applied Science and Manufacturing"
DOI: 10.1016/j.compositesa.2018.06.001
Abstract: Abstract In this work, the normal bonding and longitudinal shear adhesion properties of F-III and F-12 aramid fiber/epoxy interfaces were estimated by transverse fiber bundle tension (TFBT) test and 45° fiber bundle tension (45FBT) test,… read more here.
Keywords: fiber bundle; assessment iii; fiber epoxy; iii aramid ... See more keywords
A fractographic study on the effects of hygrothermal conditioning on carbon fiber/epoxy laminates submitted to axial compression
Sign Up to like & getrecommendations! Published in 2017 at "Engineering Failure Analysis"
DOI: 10.1016/j.engfailanal.2017.05.006
Abstract: Abstract This paper is part of a series of fractographic studies on fiber-reinforced polymer composites submitted to compression, which attempts to fill the gap in the composite failure analysis. Here, the effect of the hygrothermal… read more here.
Keywords: compression; carbon fiber; fiber epoxy; hygrothermal conditioning ... See more keywords
Crushing and energy absorption mechanisms of carbon fiber-epoxy tubes under axial impact
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Impact Engineering"
DOI: 10.1016/j.ijimpeng.2019.03.006
Abstract: Abstract The energy absorption capability of carbon fiber-epoxy tubular specimens having closed circular and open C-shape cross-sections was investigated using experimental tests when focusing on the effect of the layup configuration. Specimens were subjected to… read more here.
Keywords: fiber epoxy; energy absorption; impact; carbon fiber ... See more keywords