Articles with "fiber laser" as a keyword



Photo by terri_bleeker from unsplash

ZnS Nanospheres for Optical Modulator in an Erbium‐Doped Fiber Laser

Sign Up to like & get
recommendations!
Published in 2020 at "Annalen der Physik"

DOI: 10.1002/andp.201900454

Abstract: Zinc sulfide (ZnS), which belongs to transition metal monochalcogenides, is a semiconductor material with wide direct band gap. It can potentially show some special applications (such as luminescence, phosphor, sensors, infrared window materials, photocatalysis) by… read more here.

Keywords: doped fiber; zns; zns nanospheres; fiber laser ... See more keywords
Photo from wikipedia

First Assessment of a Carbon Monoxide Laser and a Thulium Fiber Laser for Fractional Ablation of Skin

Sign Up to like & get
recommendations!
Published in 2020 at "Lasers in Surgery and Medicine"

DOI: 10.1002/lsm.23215

Abstract: A recent generation of 5,500 nm wavelength carbon monoxide (CO) lasers could serve as a novel tool for applications in medicine and surgery. At this wavelength, the optical penetration depth is about three times higher than… read more here.

Keywords: medicine; ablation; thulium fiber; fiber laser ... See more keywords
Photo by terri_bleeker from unsplash

Efficacy of non-ablative 1927-nm fractional thulium fiber laser for the treatment of Becker's nevus: Intra- and interobserver agreement study.

Sign Up to like & get
recommendations!
Published in 2023 at "Lasers in surgery and medicine"

DOI: 10.1002/lsm.23670

Abstract: OBJECTIVE To assess the efficacy and safety of a 1927-nm fractional thulium fiber laser treatment for Becker's nevus. METHODS A retrospective analysis of patients with Becker's nevus who were treated with a 1927-nm fractional thulium… read more here.

Keywords: thulium fiber; becker nevus; fiber laser; 1927 fractional ... See more keywords
Photo by terri_bleeker from unsplash

Triple‐wavelength Q‐switched ytterbium‐doped fiber laser based on tungsten oxide as saturable absorber

Sign Up to like & get
recommendations!
Published in 2020 at "Microwave and Optical Technology Letters"

DOI: 10.1002/mop.32324

Abstract: In this article, a multiwavelength Q‐switched ytterbium‐doped fiber laser using tungsten oxide nanoparticles (WO3 NPs) as a saturable absorber (SA) is reported for the first time. The SA was prepared by depositing micron‐sized layers of… read more here.

Keywords: ytterbium doped; fiber laser; doped fiber;
Photo from wikipedia

Stable multiwavelength semiconductor optical amplifier‐based fiber laser using a 2‐mode interferometer

Sign Up to like & get
recommendations!
Published in 2020 at "Microwave and Optical Technology Letters"

DOI: 10.1002/mop.32454

Abstract: A multiwavelength semiconductor optical amplifier (SOA) fiber laser based on all‐fiber two‐mode interferometer (TMI) structure is demonstrated. The TMI generates in a comb‐like spectrum with a 1‐nm wavelength spacing and extinction ratio of 5.7 dB.… read more here.

Keywords: fiber laser; optical amplifier; multiwavelength; semiconductor optical ... See more keywords
Photo from wikipedia

Titanium carbide MXene for generating Q‐switched pulses in erbium‐doped fiber laser cavity

Sign Up to like & get
recommendations!
Published in 2021 at "Microwave and Optical Technology Letters"

DOI: 10.1002/mop.32952

Abstract: In this paper, a new thin‐film saturable absorber (SA) that belongs to the MXene family is used to generate Q‐switched laser pulses. In constructing the SA, titanium carbide (Ti3C2Tx) powder obtained through a selective etching… read more here.

Keywords: titanium carbide; laser cavity; fiber laser; laser ... See more keywords
Photo by unkhz from unsplash

Thulium-fiber laser for lithotripsy: first clinical experience in percutaneous nephrolithotomy

Sign Up to like & get
recommendations!
Published in 2020 at "World Journal of Urology"

DOI: 10.1007/s00345-020-03134-x

Abstract: Purpose To evaluate the efficacy and safety of thulium-fiber laser (TFL) in laser lithotripsy during percutaneous nephrolithotomy (PCNL). Methods Patients with stones  read more here.

Keywords: laser; stone; thulium fiber; laser lithotripsy ... See more keywords
Photo by nci from unsplash

Initial clinical experience with the new thulium fiber laser: first 50 cases

Sign Up to like & get
recommendations!
Published in 2021 at "World Journal of Urology"

DOI: 10.1007/s00345-021-03616-6

Abstract: To evaluate the efficacy, safety, and laser settings of thulium fiber laser (TFL) in laser lithotripsy during retrograde intrarenal surgery (RIRS) for ureteral and renal stones. A prospective study of the first 50 patients with… read more here.

Keywords: median iqr; laser; ureteral renal; thulium fiber ... See more keywords
Photo from wikipedia

Passive Q-switching based on ReS2 saturable absorber in Er-doped fiber laser at 1532 nm

Sign Up to like & get
recommendations!
Published in 2018 at "Optical and Quantum Electronics"

DOI: 10.1007/s11082-017-1281-3

Abstract: A passively Q-switched microsecond Er-doped fiber laser at 1532 nm wavelength was demonstrated by using a ReS2-based saturable absorber. The absorber was fabricated with ReS2 by exfoliating mechanically and transferred onto a fiber end. Stable Q-switched… read more here.

Keywords: laser; doped fiber; laser 1532; fiber laser ... See more keywords
Photo from wikipedia

Fractional dynamics of an erbium-doped fiber laser model

Sign Up to like & get
recommendations!
Published in 2019 at "Optical and Quantum Electronics"

DOI: 10.1007/s11082-019-2033-3

Abstract: In this paper we investigate the model of the time-fractional dynamics of an erbium-doped fiber laser model (TFDEFL) with Liouville–Caputo (LC), Caputo–Fabrizio–Caputo (CFC) and Atangana–Baleanu–Caputo (ABC) time-fractional derivatives. We employ the homotopy analysis transform method… read more here.

Keywords: dynamics erbium; doped fiber; erbium doped; model ... See more keywords
Photo from wikipedia

Microstructure Characterization of Fiber Laser Welds of S690QL High-Strength Steels

Sign Up to like & get
recommendations!
Published in 2017 at "Metallurgical and Materials Transactions B"

DOI: 10.1007/s11663-017-1153-z

Abstract: The use of fiber laser welding to join S690QL steels has attracted interest in the field of construction and assembly. Herein, 13-mm-thick S690QL welded joints were obtained without filler materials using the fiber laser. The… read more here.

Keywords: fusion zone; fiber laser; laser; microstructure characterization ... See more keywords