Fiber Volume Fraction Influence on Randomly Distributed Short Fiber Tungsten Fiber‐Reinforced Tungsten Composites
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201901242
Abstract: For future fusion reactors, tungsten (W) is currently the main candidate for the application as plasma-facing material as it is resilient against erosion, has the highest melting point of any metal, and shows rather benign… read more here.
Keywords: influence randomly; fiber volume; volume fraction; fiber reinforced ... See more keywords
Experimental and theoretical studies on mechanical creep of 1–3 piezocomposites
Sign Up to like & getrecommendations! Published in 2018 at "Acta Mechanica"
DOI: 10.1007/s00707-018-2209-0
Abstract: Piezoelectric materials like bulk PZT are often subjected to mechanical creep loads. But being brittle, these undergo premature failure. Hence, piezocomposites are used instead of bulk PZT. Piezocomposites are viscoelastic in nature owing to the… read more here.
Keywords: fiber volume; mechanical creep; strain; creep ... See more keywords
Three-dimensional microscopic assessment of randomly distributed representative volume elements for high fiber volume fraction unidirectional composites
Sign Up to like & getrecommendations! Published in 2018 at "Composite Structures"
DOI: 10.1016/j.compstruct.2018.02.075
Abstract: Abstract Generating realistic non-uniformly distributed three-dimensional representative volume element (RVE) for modeling the response of high fiber volume fraction composites is challenging. A novel rapid approach employing a random event-driven molecular dynamics simulation (EDMD) was… read more here.
Keywords: three dimensional; representative volume; fiber volume; volume ... See more keywords
Waviness and fiber volume content analysis in continuous carbon fiber reinforced plastics made by tailored fiber placement
Sign Up to like & getrecommendations! Published in 2019 at "Composite Structures"
DOI: 10.1016/j.compstruct.2019.110910
Abstract: Abstract In this paper, the influence of Tailored Fiber Placement (TFP) processing-related parameters on in-plane waviness and fiber volume content of unidirectional carbon fiber reinforced plastic (UD-CFRP) composites is experimentally investigated. Twelve UD-CFRP laminates, whose… read more here.
Keywords: tailored fiber; volume content; waviness fiber; fiber volume ... See more keywords
Progressive damage analysis of an adhesively bonded composite T-joint under bending, considering micro-scale effects of fiber volume fraction of adherends
Sign Up to like & getrecommendations! Published in 2020 at "Composite Structures"
DOI: 10.1016/j.compstruct.2020.113374
Abstract: Abstract In this study, a numerical study on failure assessment and stress distribution on the adhesive region in a composite T-joint under bending load case is investigated using cohesive zone method (CZM). The Finite Element… read more here.
Keywords: composite joint; fiber volume; volume; volume fraction ... See more keywords
Preparation, microstructure and mechanical properties of tungsten fiber reinforced LaAlCuNi metallic glass matrix composites
Sign Up to like & getrecommendations! Published in 2021 at "Intermetallics"
DOI: 10.1016/j.intermet.2021.107139
Abstract: Abstract In this paper, Wf/La62Al14Cu12Ni12 bulk metallic glass composites (BMGCs) were successfully prepared by a new forward melt infiltrating method. Compared with Wf/Zr-based BMGCs, the preparation of Wf/La62Al14Cu12Ni12 BMGCs is simpler and more convenient. In… read more here.
Keywords: tungsten fiber; volume; volume fraction; fiber volume ... See more keywords
Investigation of Flexural Toughness for Steel-and-Synthetic-Fiber-Reinforced Concrete Pipes
Sign Up to like & getrecommendations! Published in 2019 at "Structures"
DOI: 10.1016/j.istruc.2018.12.010
Abstract: Abstract Mechanical responses of steel-and-synthetic-fiber-reinforced pipes (FRCPs) are discussed in this paper. The energy absorption, post-cracking strength (PCS), and toughness were analyzed based on the results obtained from the three-edge bearing (3EB) experimental tests conducted… read more here.
Keywords: steel; steel synthetic; synthetic fiber; fiber volume ... See more keywords
Tensile Mechanical Properties and Failure Modes of a Basalt Fiber/Epoxy Resin Composite Material
Sign Up to like & getrecommendations! Published in 2018 at "Advances in Civil Engineering"
DOI: 10.1155/2018/7914727
Abstract: Uniaxial tensile tests of basalt fiber/epoxy (BF/EP) composite material with four different fiber orientations were conducted under four different fiber volume fractions, and the variations of BF/EP composite material failure modes and tensile mechanical properties… read more here.
Keywords: fiber volume; composite material; basalt fiber; fiber ... See more keywords
Permeability and fabric compaction in forming of fiber metal laminates
Sign Up to like & getrecommendations! Published in 2023 at "Journal of Composite Materials"
DOI: 10.1177/00219983231175725
Abstract: Significant fluid–structure interaction is present in fiber metal laminate forming with a low viscous matrix. A modular, process-inspired test setup is presented for one-dimensional saturated and unsaturated infiltration experiments for fiber metal laminates. Permeability measurements… read more here.
Keywords: permeability; fiber metal; fiber volume; metal laminates ... See more keywords
Kenaf Fibrous Concrete: Mechanical Properties with Different Fiber Volume Fraction
Sign Up to like & getrecommendations! Published in 2018 at "International Journal on Advanced Science, Engineering and Information Technology"
DOI: 10.18517/ijaseit.8.4.3945
Abstract: Kenaf fiber comes from Kenaf plant which grows thrivingly in hot and humid temperature. The origin of Kenaf comes from a few different countries that have similar characteristics such as Africa, China, and India. Kenaf… read more here.
Keywords: fiber volume; fibrous concrete; fiber; mechanical properties ... See more keywords
Aeroelastic Stability of Conventional and Tow-Steered Composite Plates Under Stochastic Fiber Volume
Sign Up to like & getrecommendations! Published in 2020 at "AIAA Journal"
DOI: 10.2514/1.j059106
Abstract: The numerical investigation of the stochastic aeroelastic characteristics of conventional and tow-steered composite laminates subjected to random uncertainties affecting the laminate fiber volume i... read more here.
Keywords: conventional tow; fiber volume; tow steered; steered composite ... See more keywords