Myelin water imaging and R2* mapping in neonates: Investigating R2* dependence on myelin and fibre orientation in whole brain white matter
Sign Up to like & getrecommendations! Published in 2019 at "NMR in Biomedicine"
DOI: 10.1002/nbm.4222
Abstract: R2* relaxation provides a semiquantitative method of detecting myelin, iron and white matter fibre orientation angles. Compared with standard histogram‐based analyses, angle‐resolved analysis of R2* has previously been shown to substantially improve the detection of… read more here.
Keywords: brain; fibre orientation; myelin; white matter ... See more keywords
Influence of Punching Parameters on Fibre Orientation and Related Physical and Mechanical Properties of Needle Punched Nonwoven
Sign Up to like & getrecommendations! Published in 2019 at "Fibers and Polymers"
DOI: 10.1007/s12221-019-8784-4
Abstract: In this research work, the authors have investigated the needling effect on a non-woven prepared form the webs of equal basis weight. Punch density, needle penetration depth and strokes per minute are taken as variables.… read more here.
Keywords: punching parameters; basis weight; fibre orientation;
Optimal Design of a Filter Media by Tuning the Structure of Needle Punched Nonwoven: Influence of Carding Parameters
Sign Up to like & getrecommendations! Published in 2020 at "Fibers and Polymers"
DOI: 10.1007/s12221-020-9680-7
Abstract: This research work investigated the influence of carding parameters on different properties. In this study an attempt has been made to change the fibre orientation by changing the carding parameters such as feeder speed, cylinder… read more here.
Keywords: carding parameters; design; fibre orientation; influence carding ... See more keywords
Influence of fibre orientation on the tensile behaviour of ultra-high performance fibre reinforced cementitious composites
Sign Up to like & getrecommendations! Published in 2017 at "Cement and Concrete Research"
DOI: 10.1016/j.cemconres.2017.03.007
Abstract: Abstract The main objective of this study is to quantify the effect of fibre orientation on the tensile behaviour of Ultra-High Performance Fibre-Reinforced Cementitious Composites (UHPFRC). A strategy to align the steel fibres within the… read more here.
Keywords: fibre orientation; orientation; orientation tensile; tensile behaviour ... See more keywords
On the optimal choice of fibre orientation angle in off-axis tensile test using oblique end-tabs: Theoretical and experimental studies
Sign Up to like & getrecommendations! Published in 2019 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2019.04.022
Abstract: Abstract Shear strength evaluation in composite materials still remains a not fully solved problem. One of most promising proposals to characterise a material in shear by means of a simple tensile test is the off-axis… read more here.
Keywords: orientation; orientation angle; test; tab angle ... See more keywords
Comparison between methods to determine the fibre orientation factor of an HPFRC bridge box girder
Sign Up to like & getrecommendations! Published in 2020 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2020.121291
Abstract: Abstract Due to high volume fraction of steel fibres allied to improved rheology and packing density of cementitious matrices, materials like HPFRC and UHPFRC have been providing the possibility of partial or total replacement of… read more here.
Keywords: fibre orientation; orientation; box girder; factor ... See more keywords
Non-linear material characterization of CFRP with FEM utilizing cohesive surface considerations validated with effective tensile test fixturing
Sign Up to like & getrecommendations! Published in 2020 at "Materials today communications"
DOI: 10.1016/j.mtcomm.2019.100872
Abstract: Abstract Modelling the effect of fibre orientation in carbon fibre reinforced plastic (CFRP) on mechanical behaviour is critical for component design and manufacturing process optimization. The objectives of this paper are to simulate the mechanical… read more here.
Keywords: failure models; fibre orientation; failure; test ... See more keywords
Measuring fibre orientation and predicting elastic properties of discontinuous long fibre thermoplastic composites
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Composite Materials"
DOI: 10.1177/0021998320949635
Abstract: Elastic properties in critical areas of 3 D shells made from discontinuous long fibre (DLF) composites are difficult to determine via traditional methods, due to the heterogeneity of the material and the geometry of the part.… read more here.
Keywords: long fibre; fibre orientation; measuring fibre; elastic properties ... See more keywords
Investigation into fibre orientation and weldline reduction of injection moulded short glass-fibre/polyamide 6-6 automotive components
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Thermoplastic Composite Materials"
DOI: 10.1177/0892705719833098
Abstract: Due to the increasing demands on automotive components, manufacturers are relying on injection moulding components from fibre-reinforced polymers in an attempt to increase strength to weight ratio. The use of reinforcing fibres in injection moulded… read more here.
Keywords: glass fibre; fibre orientation; automotive components; component ... See more keywords
Damping under Varying Frequencies, Mechanical Properties, and Failure Modes of Flax/Polypropylene Composites
Sign Up to like & getrecommendations! Published in 2023 at "Polymers"
DOI: 10.3390/polym15041042
Abstract: This work investigates the effects of fibre content, fibre orientation, and frequency on the dynamic behaviour of flax fibre-reinforced polypropylene composites (FFPCs) to improve understanding of the parameters affecting vibration damping in FFPCs. The effects… read more here.
Keywords: fibre orientation; fibre; polypropylene composites; flax fibre ... See more keywords