High Energy Harvesting Performances Silicone Elastomer via Filling Soft Dielectric with Stretching Deformability
Sign Up to like & getrecommendations! Published in 2023 at "Advanced Materials"
DOI: 10.1002/adma.202300246
Abstract: Dielectric elastomer generators (DEGs) with high generated energy density and high conversion efficiency are of great interest. Among several dielectric elastomers (DEs), silicone elastomer filled with ceramic fillers have been extensively studied for their high… read more here.
Keywords: energy harvesting; silicone elastomer; energy; filler ... See more keywords
The Effects of Poly(amide–imide)/SiO2 Nanocomposite Containing N-Trimellitylimido-l-Methionine Diacid as a Filler on the Thermal and Morphological Properties of Poly(vinyl pyrrolidone) Composites
Sign Up to like & getrecommendations! Published in 2018 at "Advances in Polymer Technology"
DOI: 10.1002/adv.21647
Abstract: In this article, a simple ultrasonic irradiation method for preparing novel poly(vinyl pyrrolidone)/poly(amide–imide)-SiO2 nanocomposites (PVP/PAI-SiO2 NC)s is reported. For this purpose, PAI-SiO2 NC as a filler was embedded in PVP. The presence of incorporated filler… read more here.
Keywords: microscopy; vinyl pyrrolidone; sio2; filler ... See more keywords
Preparation of a modified diatomite filler via polyethyleneimine impregnation and its application in papermaking
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.46275
Abstract: In this study, we sequentially modified diatomite (DM) particles with sodium dodecyl sulfate and polyethyleneimine with an impregnation method. Modified DM was used as both a filler and an anionic trash catcher in the papermaking… read more here.
Keywords: polyethyleneimine impregnation; application; papermaking furnish; filler ... See more keywords
Developing conductive immiscible polystyrene/polypropylene blends with a percolated conducting polyaniline/polyamide filler by tuning its specific interactions with the styrene‐based triblock compatibilizer grafted with maleic anhydride
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.48433
Abstract: An approach to induce conductivity in immiscible polystyrene/polypropylene (PS/PP) blends is described using a percolated conducting polyaniline/polyamide (PANI/PA) filler combined with a polystyrene‐block‐poly(ethylene‐ran‐butylene)‐block‐polystyrene‐graft‐maleic anhydride compatibilizer. The approach is based on the ability of the compatibilizer… read more here.
Keywords: polystyrene polypropylene; filler; compatibilizer; polypropylene blends ... See more keywords
Hyaluronic acid filler injection for deep nasolabial folds: A novel intraoral approach
Sign Up to like & getrecommendations! Published in 2022 at "Clinical Anatomy"
DOI: 10.1002/ca.23919
Abstract: Hyaluronic acid filler injection is a minimally invasive procedure for facial rejuvenation that involves injecting filling materials to correct the volume or augment specific areas in the face. Deep nasolabial folds are a common concern… read more here.
Keywords: injection; nasolabial folds; filler; hyaluronic acid ... See more keywords
Novel Chitosan Dermal Filler with Enhanced Moldability and Elasticity.
Sign Up to like & getrecommendations! Published in 2022 at "Macromolecular bioscience"
DOI: 10.1002/mabi.202200081
Abstract: Currently, dermal fillers are largely based on commercialized cross-linked hyaluronic acid (HA) injections, which require a large injection force. Additionally, HA can be easily decomposed by enzymes, and HA-treated tissues present a risk of developing… read more here.
Keywords: injection; moldability; filler; dermal filler ... See more keywords
3D Printing of BaTiO3/PVDF Composites with Electric In Situ Poling for Pressure Sensor Applications
Sign Up to like & getrecommendations! Published in 2017 at "Macromolecular Materials and Engineering"
DOI: 10.1002/mame.201700229
Abstract: This paper presents 3D printing of piezoelectric sensors using BaTiO3 (BTO) filler in a poly(vinylidene) fluoride (PVDF) matrix through electric in situ poling during the 3D printing process. Several conventional methods require complicated and time-consuming… read more here.
Keywords: filler; bto; electric situ; pvdf ... See more keywords
Novel dental composite material reinforced with silane functionalized microsized gypsum filler particles
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Composites"
DOI: 10.1002/pc.23599
Abstract: Gypsum has been recognized as acceptable for human consumption as a dietary source of calcium. During contact with teeth, it releases Ca2+ ions needed for remineralization of tooth tissue, and therefore based on the concept… read more here.
Keywords: material reinforced; material; filler; gypsum filler ... See more keywords
Effect of adding nanosilica particulate filler on the wear behavior of dental composite
Sign Up to like & getrecommendations! Published in 2018 at "Polymer Composites"
DOI: 10.1002/pc.24436
Abstract: The aim of this study was to fabricate BisGMA based nanosilica filled dental composites and to study the effect of varying nanosilica filler content on their wear characteristics. The composites were developed by varying filler… read more here.
Keywords: dental composite; chewing speed; effect; filler content ... See more keywords
Ethylene–octene copolymer–wood flour/oil flax straw biocomposites: Effect of filler type and content on mechanical properties
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Engineering and Science"
DOI: 10.1002/pen.24626
Abstract: The properties of biocomposites based on ethylene–octene copolymers (EOCs) were studied. The mechanical, rheological, and physical properties of the biocomposites were investigated with attention to the filler type, filler content, and grade of EOC. Three… read more here.
Keywords: ethylene octene; filler type; content; flour oil ... See more keywords
Filler-Enhanced Piezoelectricity of Poly-L-Lactide and Its Use as a Functional Ultrasound-Activated Biomaterial.
Sign Up to like & getrecommendations! Published in 2023 at "Small"
DOI: 10.1002/smll.202301981
Abstract: Poly-L-lactide (PLLA) offers a unique possibility for processing into biocompatible, biodegradable, and implantable piezoelectric structures. With such properties, PLLA has potential to be used as an advanced tool for mimicking biophysical processes that naturally occur… read more here.
Keywords: plla; piezoelectricity; ultrasound; filler ... See more keywords