Photo by neom from unsplash
Sign Up to like & get
recommendations!
0
Published in 2018 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-8697-9
Abstract: High sensitive resistive type humidity sensor based titanium oxide/polyaniline (TiO2/PANI) nanocomposite thin films prepared by a sol–gel spin coating technique on an alumina substrate. The resultant nanocomposites were characterized by using X-ray diffraction (XRD), Field…
read more here.
Keywords:
films prepared;
prepared sol;
tio2 pani;
humidity ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
0
Published in 2018 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-9751-3
Abstract: In this article, (Al1−0.02−xSi0.02Tix)2Oy (x = 0.2, 0.9 and 2%) thin films were prepared on Pt/Ti/SiO2/Si substrates using sol–gel technique. The dielectric properties of undoped and Si–Ti co-doped Al2O3 thin films were investigated. The leakage current of…
read more here.
Keywords:
thin films;
dielectric property;
films prepared;
sol gel ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2017 at "Journal of Sol-Gel Science and Technology"
DOI: 10.1007/s10971-017-4412-1
Abstract: Cadmium oxide thin films were prepared on glass substrates by the sol–gel spin-coating technique. The effects of the annealing temperature and Cd2+ concentration at the initial solution on the physical properties of the thin films…
read more here.
Keywords:
thin films;
films prepared;
oxide thin;
cadmium oxide ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of Electronic Materials"
DOI: 10.1007/s11664-020-08266-9
Abstract: Cd1−xZnxTe films were prepared on borosilicate glass substrate using RF magnetron sputtering in this work. The effects of sputtering power, sputtering pressure and substrate temperature on the properties of the films were investigated in detail.…
read more here.
Keywords:
magnetron sputtering;
cd1 xznxte;
films prepared;
xznxte films ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2017.06.332
Abstract: Abstract This paper reports on the results of comparative investigations of Si-C-N films prepared by using both plasma enhanced chemical vapor deposition (PECVD) and DC magnetron sputtering (MS) at different nitrogen flow rates (F N2…
read more here.
Keywords:
magnetron sputtering;
films prepared;
spectroscopy;
enhanced chemical ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2016.09.083
Abstract: Abstract Tungsten trioxide (WO3) semiconducting thin films were prepared by (i) sedimentation process, (ii) reactive magnetron sputtering from tungsten target under various modes of plasma excitation and (iii) combination of both methods. All samples were…
read more here.
Keywords:
thin films;
plasma;
prepared sedimentation;
films prepared ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.09.031
Abstract: Abstract We report that Dy doping can be used to enhance ferroelectric properties and reduce leakage current in (001) epitaxial Bi1-xDyxFeO3 (BDxFO) thin films where x = 0.05, 0.075, 0.1, 0.125. The 120 nm thin BDxFO films were…
read more here.
Keywords:
thin films;
films prepared;
prepared pulsed;
bdxfo films ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.10.042
Abstract: Abstract Carbon films prepared by polyimide (PI) films treated under 1500°C exhibit favorable thermal conductivity. However, the bonds of carbon films will fracture and recombine which will cause shrinking and forming defects. The flexibility of…
read more here.
Keywords:
thermal conductivity;
carbon films;
polyimide films;
films prepared ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2020 at "Colloids and Surfaces A: Physicochemical and Engineering Aspects"
DOI: 10.1016/j.colsurfa.2020.125842
Abstract: Abstract Nowadays, the application of colloidal crystals as a photonic crystal template to prepare invers opal structures has been considerable in developing biosensors. The particle size distribution and polydispersity index (PDI) of polymer microspheres are…
read more here.
Keywords:
prepared colloidal;
films prepared;
colloidal freeze;
opal films ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2018 at "Electrochemistry Communications"
DOI: 10.1016/j.elecom.2017.12.017
Abstract: Abstract The electrocatalytic behaviour of CoFe 2 O 4 thin films, prepared by aerosol-assisted chemical vapour deposition, towards the oxygen evolution reaction in an alkaline medium is reported. X-ray diffraction and SEM data show that…
read more here.
Keywords:
thin films;
towards oxygen;
films prepared;
oxygen evolution ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Food Hydrocolloids"
DOI: 10.1016/j.foodhyd.2019.05.014
Abstract: Abstract Emulsions containing essential oils (EOs) of oregano (OG-EO), lemon (LM-EO), fruit of Amomum tsaoko Crevost et Lemaire (ACL-EO) or grapefruit (GF-EO) were used as dispersed phase and aqueous solution of soy protein isolates-gum acacia…
read more here.
Keywords:
films prepared;
edible films;
gum acacia;
soy protein ... See more keywords