Emulsion‐electrospinning n‐octadecane/silk composite fiber as environmental‐friendly form‐stable phase change materials
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.45538
Abstract: The ultrafine n-octadecane/silk composite fibers as form-stable phase change materials were successfully developed by the emulsion-electrospinning method. The effect of n-octadecane content in the emulsion on the morphology and thermal energy storage capacity of the… read more here.
Keywords: phase; form stable; octadecane silk; silk ... See more keywords
High-performance flame retarded paraffin/epoxy resin form-stable phase change material
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science"
DOI: 10.1007/s10853-018-2846-7
Abstract: In this study, a novel halogen-free flame retarded form-stable phase change material (PCM) was designed and prepared, selecting paraffin as the thermal-energy storage material and epoxy resin (EP) as the supporting material; furthermore, a novel… read more here.
Keywords: flame retarded; paraffin; form stable; flame ... See more keywords
A hydrogel-like form-stable phase change material with high loading efficiency supported by a three dimensional metal-organic network
Sign Up to like & getrecommendations! Published in 2021 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2021.129898
Abstract: Abstract We prepared a hydrogel-like polyethylene glycol (PEG)-based form-stable phase change material (FSPCM) supported by a three dimensional (3D) metal-organic network through a very simple method with low cost. The 3D network with ultrahigh molecular… read more here.
Keywords: hydrogel like; organic network; form stable; metal organic ... See more keywords
A promising form-stable phase change material composed of C/SiO2 aerogel and palmitic acid with large latent heat as short-term thermal insulation
Sign Up to like & getrecommendations! Published in 2020 at "Energy"
DOI: 10.1016/j.energy.2020.118478
Abstract: Abstract In this work, palmitic acid (PA) is used as the PCM, while a novel kind of 3D porous carbon/silica composite aerogel (CSA) is involved as porous supporting material to prepare the form-stable PCM composites… read more here.
Keywords: form stable; palmitic acid; latent heat; csa ... See more keywords
Preparation and performance of form-stable TBAB hydrate/SiO2 composite PCM for cold energy storage
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Refrigeration"
DOI: 10.1016/j.ijrefrig.2019.02.020
Abstract: Abstract Combining cold energy storage using phase change materials (PCMs) with cooling system used in air conditioner can make notable improvement in energy conservation. In this research, 40% tetra-n-butyl ammonium bromide (TBAB) solution as cold… read more here.
Keywords: energy storage; composite pcm; form stable; cold energy ... See more keywords
Form-stable phase change material embedded with chitosan-derived carbon aerogel
Sign Up to like & getrecommendations! Published in 2017 at "Materials Letters"
DOI: 10.1016/j.matlet.2017.02.075
Abstract: Abstract Chitosan, as a low-price and eco-friendly raw material, was used to synthesize a graphene-based carbon aerogel (CA). Afterwards, 1-hexadecanol was infiltrated into CA to prepare a form-stable phase change material (PCM) for thermal energy… read more here.
Keywords: form stable; phase change; stable phase; change material ... See more keywords
Fabrication of form stable composite phase change materials for thermal energy storage by direct powder incorporation with a preheating process
Sign Up to like & getrecommendations! Published in 2021 at "Powder Technology"
DOI: 10.1016/j.powtec.2021.06.030
Abstract: Abstract This work concerns with form stable composite phase change materials (FSCPCMs) for thermal energy storage applications. A vast knowledge base has been established in formulation design, material selection and characterisation. However, research efforts on… read more here.
Keywords: composite phase; stable composite; form stable; powder ... See more keywords
Silicone rubber/paraffin@silicon dioxide form-stable phase change materials with thermal energy storage and enhanced mechanical property
Sign Up to like & getrecommendations! Published in 2019 at "Solar Energy Materials and Solar Cells"
DOI: 10.1016/j.solmat.2019.03.034
Abstract: Abstract A kind of silicone rubber (SR)/paraffin (Pa)@silicon dioxide (SiO2) composite form-stable phase change material (PCM) was developed in this paper. Pa@SiO2 was obtained by choosing Pa as PCM core microencapsulated in SiO2 shell based… read more here.
Keywords: form stable; phase change; sio2; energy ... See more keywords
Preparation and characterization of erythritol/sepiolite/exfoliated graphite nanoplatelets form-stable phase change material with high thermal conductivity and suppressed supercooling
Sign Up to like & getrecommendations! Published in 2020 at "Solar Energy Materials and Solar Cells"
DOI: 10.1016/j.solmat.2020.110726
Abstract: Abstract Sepiolite (Sep) and exfoliated graphite nanoplatelets (xGnP) were applied as supporting material and thermal conductive fillers to solve the problems of possible leakage, low thermal conductivity and high supercooling of m-erythritol (ME) as a… read more here.
Keywords: form stable; sep; form; thermal conductivity ... See more keywords
Ultrafine electrospun fiber based on ionic liquid/AlN/copolyamide composite as novel form-stable phase change material for thermal energy storage
Sign Up to like & getrecommendations! Published in 2021 at "Solar Energy Materials and Solar Cells"
DOI: 10.1016/j.solmat.2020.110953
Abstract: Abstract A novel form-stable phase change material (FSPCM) based on ionic liquid/aluminum nitride/copolyamide composite were fabricated from electrospinning approach. The ionic liquid 1-hexadecyl-3-methylimidazolium bromide (IL) was chosen as phase change materials while nano aluminum nitride… read more here.
Keywords: stable phase; form stable; phase change; change material ... See more keywords
Improved thermal conductivity of form-stable NaNO3: Using the skeleton of porous ceramic modified by SiC
Sign Up to like & getrecommendations! Published in 2021 at "Solar Energy Materials and Solar Cells"
DOI: 10.1016/j.solmat.2021.111310
Abstract: Abstract Corrosion and low thermal conductivity are considered as two great challenges for the application of salts-based phase change materials (PCMs). To address these problems, a novel skeleton, namely SiC modified diatomite-based porous ceramic, was… read more here.
Keywords: skeleton; stable nano3; form stable; thermal conductivity ... See more keywords