Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-019-0241-1
Abstract: In order to investigate the particulate fouling characteristics, experiments of water based magnesia particulate suspensions were carried out in an annular test section under subcooled flow boiling. The sizes of magnesia particles were 40 nm…
read more here.
Keywords:
value fouling;
resistance;
fouling characteristics;
subcooled flow ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "Desalination"
DOI: 10.1016/j.desal.2017.06.020
Abstract: Abstract Nanoparticle addition to membranes is advancing the performance of separation processes and improving the flux without jeopardizing the selectivity. However, fouling-resistance improvement of RO membranes is still needed in the desalination industry. The objective…
read more here.
Keywords:
control membrane;
desalination characteristics;
fouling resistance;
zif nanoparticles ... See more keywords
Photo by eriic from unsplash
Sign Up to like & get
recommendations!
0
Published in 2017 at "Journal of colloid and interface science"
DOI: 10.1016/j.jcis.2017.06.067
Abstract: In this work, an iron-tannin-framework (ITF) complex was introduced to a poly (ether sulfone) (PES) casting solution as a hydrophilic additive to fabricate ITF/PES ultrafiltration (UF) membranes via non-solvent-induced phase separation (NIPS). The structure and…
read more here.
Keywords:
iron tannin;
fouling resistance;
pes membranes;
performance ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Polymer"
DOI: 10.1016/j.polymer.2019.121949
Abstract: Abstract Block copolymers (BCPs) are excellent candidates for surface modification. However, little attention had been directed to systematically investigate the effect of molecular structure on membranes performance, although BCPs of different compositions were extensively blended…
read more here.
Keywords:
tri block;
block copolymers;
fouling resistance;
block ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2022 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.1c22205
Abstract: Surface topography has been demonstrated as an effective nonchemical strategy for controlling the fouling resistance of a surface, but its impact on optical transparency remains a barrier to the application of this strategy in optical…
read more here.
Keywords:
optical transparency;
transparency fouling;
surface;
fouling resistance ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2022 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.2c14884
Abstract: Membrane fouling remains a key challenge for membrane separations. Hydrophilic membrane surface modification can mitigate irreversible foulant deposition, thereby improving fouling resistance. We report new hydrophilic membrane coatings based on 1,4-benzoquinone and various commercially available…
read more here.
Keywords:
edr 148;
fouling resistance;
benzoquinone;
surface modification ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2022 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.2c16417
Abstract: We examined the effects of alkyl carbon spacer length (CSL) and molecular weight on fouling resistance and release properties of zwitterionic poly(sulfobetaine methacrylate) brushes. Using surface-initiated atom transfer radical polymerization, we synthesized two series of…
read more here.
Keywords:
release properties;
poly sulfobetaine;
molecular weight;
resistance release ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2023 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.3c05133
Abstract: The most effective antifouling coatings are designed to slowly release biocides that target a broad spectrum of marine organisms. However, as biocides have a deleterious effect on marine life, there is demand for environmentally friendly…
read more here.
Keywords:
modified elastomers;
brush modified;
chemistry;
microscopy ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2022 at "ACS Omega"
DOI: 10.1021/acsomega.1c05311
Abstract: Nanostructured polymeric membranes are of great importance in enhancing the antifouling properties during water filtration. Nanomaterials with tunable size, morphology and composition, surface modification, and increased functionality provide considerable opportunities for effective wastewater treatment. Thus,…
read more here.
Keywords:
organic matter;
natural organic;
removal;
fouling resistance ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2018 at "Heat Transfer Engineering"
DOI: 10.1080/01457632.2017.1280285
Abstract: ABSTRACT This paper describes the results of accelerated particulate fouling tests performed on three enhanced tubes and a plain tube. The tests were performed using ferric oxide as the foulant material. Three enhanced tubes included…
read more here.
Keywords:
particulate fouling;
fouling resistance;
ferric oxide;
start helically ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2022 at "International Journal of Molecular Sciences"
DOI: 10.3390/ijms23126517
Abstract: The competitive balance between uranium (VI) (U(VI)) adsorption and fouling resistance is of great significance in guaranteeing the full potential of U(VI) adsorbents in seawater, and it is faced with insufficient research. To fill the…
read more here.
Keywords:
adsorption;
fouling resistance;
design;
competitive balance ... See more keywords