Application of an artificial neural network model to predict the ultimate tensile strength of friction-welded titanium tubes
Sign Up to like & getrecommendations! Published in 2019 at "Journal of the Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-019-1613-2
Abstract: This paper presents an investigation to establish the link between friction welding process parameters and the ultimate tensile strength (UTS) of friction-welded titanium joints by application of an artificial neural network (ANN) technique. The experimental… read more here.
Keywords: friction welded; friction; ultimate tensile; welded titanium ... See more keywords
Influence of heat treatment on friction-welded joints made of high-carbon high-chromium tool steel/low-carbon steel for tooling applications
Sign Up to like & getrecommendations! Published in 2020 at "Journal of the Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-019-2165-1
Abstract: In friction welding, a favourable combination of process parameters helps to form a strong joint. Metallurgical transformations take place depending on the material combination and process parameters. Mechanical testing and macroscopic and microscopic examinations help… read more here.
Keywords: friction welded; steel; heat treatment; carbon ... See more keywords
Inhomogeneity of microstructure and mechanical properties in radial direction of aluminum/copper friction welded joints
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2017.12.027
Abstract: Abstract The sample in center position of friction welded aluminum/copper joints has the highest tensile strength and elongation, which are 88 MPa and 20%, respectively. The tensile properties decrease with the increase of thickness of intermetallic… read more here.
Keywords: radial direction; fracture; friction welded; position ... See more keywords
Studies of the interfacial structure of a linear friction welded Fe/Ni joint: First principles calculation and TEM validation
Sign Up to like & getrecommendations! Published in 2017 at "Materials Characterization"
DOI: 10.1016/j.matchar.2017.04.008
Abstract: Abstract In this work, the interfacial structure of a linear friction welded (LFWed) Fe/Ni joint was studied using CASTEP based on first principles. Calculations clearly show that the Fe(100)/Ni(100) structure is the most stable bonding… read more here.
Keywords: interfacial structure; friction welded; linear friction; structure linear ... See more keywords
Assessment of Selected Structural Properties of High-Speed Friction Welded Joints Made of Unalloyed Structural Steel
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma16010093
Abstract: Commonly used S235JR structural steel, generally associated with good weldability, was joined by high-speed friction welding (HSFW). The friction welding tests were performed with a rotational speed of n = 8000 rpm and four different… read more here.
Keywords: high speed; speed friction; friction; friction welded ... See more keywords
Effect of Heat Treatment on the Microstructure and Mechanical Properties of Rotary Friction Welded AA7075 and AA5083 Dissimilar Joint
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16062464
Abstract: The present work aims to investigate the changes in the microstructural and mechanical properties of various pre- and post weld heat treatments (PWHTs) on rotary friction welded dissimilar (AA7075 and AA5083) aluminum alloys. The investigation… read more here.
Keywords: friction; aa7075 aa5083; heat; mechanical properties ... See more keywords
Mechanical Performance and Microstructural Evolution of Rotary Friction Welding of Acrylonitrile Butadiene Styrene and Polycarbonate Rods
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16093295
Abstract: Rotary friction welding (RFW) is a green manufacturing technology with environmental pollution in the field of joining methods. In practice, the welding quality of the friction-welded parts was affected by the peak temperature in the… read more here.
Keywords: friction welding; welded parts; friction; friction welded ... See more keywords
Residual Stress Analysis in Linear Friction Welded Ti17
Sign Up to like & getrecommendations! Published in 2024 at "Materials"
DOI: 10.3390/ma17184507
Abstract: Residual stresses with a complex distribution are generated after linear friction welding, which affects the service performance of the weldment. In this work, a numerical model for linear-friction-welded Ti17 (Ti-5Al-2Sn-2Zr-4Mo-4Cr) was developed to investigate the… read more here.
Keywords: linear friction; friction welded; stress; welded ti17 ... See more keywords
Improvement Friction Welded 6063 – T6 Aluminum Alloy Joint Properties
Sign Up to like & getrecommendations! Published in 2024 at "International Journal of Applied Mechanics and Engineering"
DOI: 10.59441/ijame/192271
Abstract: This study aims to investigate the effect of shot peening on the mechanical characteristics and microstructure of an aluminum alloy 6063 friction welded joints. 6063 bars with 12mm diameters and 70mm lengths were prepared; some… read more here.
Keywords: aluminum; friction welded; aluminum alloy; improvement friction ... See more keywords