Effects of natural aging and heat treatments conditions on mechanical properties of dissimilar composite between 6061 Al alloy and Al-Si12CuNi (AC8A) Al cast alloy fabricated by friction welding
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Mechanics and Materials in Design"
DOI: 10.1007/s10999-017-9391-4
Abstract: Abstract This paper describes the effects of natural aging and heat treatments conditions on mechanical properties of dissimilar composite between 6061 Al alloy (AA6061) and Al-Si12CuNi (AC8A) Al cast alloy, which was fabricated by friction… read more here.
Keywords: dissimilar composite; friction welding; fabricated friction; natural aging ... See more keywords
Strategies for numerical simulation of linear friction welding of metals: a review
Sign Up to like & getrecommendations! Published in 2017 at "Production Engineering"
DOI: 10.1007/s11740-017-0726-7
Abstract: Linear friction welding (LFW) is a solid-state joining process used to weld non-axisymmetric components. Material joining is obtained through the reciprocating motion of two specimens undergoing an axial force. During this process, the heat source… read more here.
Keywords: numerical simulation; friction welding; linear friction; simulation linear ... See more keywords
Friction Welding of Electron Beam Melted γ-TiAl Alloy Ti–48Al–2Cr–2Nb
Sign Up to like & getrecommendations! Published in 2018 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-018-1458-x
Abstract: In the current work, rotary friction welding of electron beam melted (EBM) γ-TiAl alloy Ti–48Al–2Cr–2Nb (at%) was investigated. Welding experiments were conducted using cylindrical bars of 12 mm diameter and 70 mm height in as-fabricated and heat… read more here.
Keywords: friction welding; beam melted; friction; tial alloy ... See more keywords
Rotary friction welding of molybdenum components
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Refractory Metals and Hard Materials"
DOI: 10.1016/j.ijrmhm.2018.02.004
Abstract: Abstract Joining of TZM components by inertia rotary friction (IFW) welding is an established industrial process for welding cross-sections up to 1500 mm2. Up-scaling to medium-size components up to 5000 mm2 in a direct drive friction welding… read more here.
Keywords: friction welding; friction; welding molybdenum; process ... See more keywords
Continuous drive friction welding of 5A33 Al alloy to AZ31B Mg alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2016.11.004
Abstract: Abstract 5A33 aluminum alloy bar was joined with AZ31B magnesium alloy bar by continuous drive friction welding. The friction weldability of Al alloy to Mg alloy was investigated. The microstructure of the friction interface in… read more here.
Keywords: alloy; friction welding; microscopy; friction ... See more keywords
Effect of friction welding condition on joining phenomena and mechanical properties of friction welded joint between 6063 aluminium alloy and AISI 304 stainless steel
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2017.02.008
Abstract: Abstract Dissimilar metal joints have some advantages such as high functionality characteristics for the industrial usage. This paper describes the effect of friction welding condition on joining phenomena, tensile strength, and bend ductility of friction… read more here.
Keywords: friction welding; friction; joining phenomena; condition joining ... See more keywords
Hot deformation behavior and constitutive model of GH4169 superalloy for linear friction welding process
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2018.03.017
Abstract: Abstract In order to realize a better description about the plastic flow behavior in linear friction welding process of GH4169 superalloy, especially at the friction interface where rather elevated temperature and severe deformation happened, it… read more here.
Keywords: friction welding; linear friction; model; strain ... See more keywords
Microstructural characterization and mechanical property of GH4169 superalloy joints obtained by linear friction welding
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2019.06.032
Abstract: Abstract The solid-solution strengthened GH4169 superalloy is joined successfully by linear friction welding (LFW) at various welding parameters in this study. Supported by numerical simulation, the microstructural characterization and mechanical property of the linear friction… read more here.
Keywords: linear friction; friction welding; characterization mechanical; friction ... See more keywords
Friction welding of dissimilar joints copper-stainless steel pipe consist of 0.06 wall thickness to pipe diameter ratio
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2021.06.050
Abstract: Abstract This paper examines dissimilar friction welding between electrolytic tough pitch copper (ETP-Cu) and stainless steel (SS) of grade 304 L for pipe joint configuration, having 0.06 wall thickness to pipe diameter ratio. The welding is… read more here.
Keywords: friction welding; stainless steel; wall thickness; pipe ... See more keywords
Full-scale friction welding system for pipeline steels
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Research and Technology"
DOI: 10.1016/j.jmrt.2018.12.007
Abstract: Abstract A fully automatic friction welding system was specially developed for the girth friction welding of pipelines with a diameter of up to 400 mm. The friction welding methods were solid-state joining processes based on the… read more here.
Keywords: full scale; welding system; scale friction; friction welding ... See more keywords
Strength and hardness studies of C44300 tube to AA7075-T651 tube plate threaded and unthreaded dissimilar joints fabricated by friction welding process
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Research and Technology"
DOI: 10.1016/j.jmrt.2019.06.008
Abstract: Abstract Friction welding is an important process used nowadays especially for joining dissimilar metals in engineering and allied industries. The joining of dissimilar materials is different from the conventional materials and needs proper care and… read more here.
Keywords: friction welding; process; tube plate; friction ... See more keywords